diff --git a/Marlin/src/HAL/AVR/fastio.h b/Marlin/src/HAL/AVR/fastio.h index 8a5e4650f4c6..4516d9cd540f 100644 --- a/Marlin/src/HAL/AVR/fastio.h +++ b/Marlin/src/HAL/AVR/fastio.h @@ -255,84 +255,6 @@ enum ClockSource2 : uint8_t { #define SET_FOCB(T,V) SET_FOC(T,B,V) #define SET_FOCC(T,V) SET_FOC(T,C,V) -#if 0 - -/** - * PWM availability macros - */ - -// Determine which hardware PWMs are already in use -#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN) -#if PIN_EXISTS(CONTROLLER_FAN) - #define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN) -#else - #define PWM_CHK_FAN_B(P) _PWM_CHK_FAN_B(P) -#endif - -#if ANY_PIN(FAN, FAN1, FAN2, FAN3, FAN4, FAN5, FAN6, FAN7) - #if PIN_EXISTS(FAN7) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN || P == FAN7_PIN) - #elif PIN_EXISTS(FAN6) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN || P == FAN6_PIN) - #elif PIN_EXISTS(FAN5) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN || P == FAN5_PIN) - #elif PIN_EXISTS(FAN4) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN || P == FAN4_PIN) - #elif PIN_EXISTS(FAN3) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN || P == FAN3_PIN) - #elif PIN_EXISTS(FAN2) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN || P == FAN2_PIN) - #elif PIN_EXISTS(FAN1) - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN || P == FAN1_PIN) - #else - #define PWM_CHK_FAN_A(P) (P == FAN0_PIN) - #endif -#else - #define PWM_CHK_FAN_A(P) false -#endif - -#if HAS_MOTOR_CURRENT_PWM - #if PIN_EXISTS(MOTOR_CURRENT_PWM_XY) - #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E_PIN || P == MOTOR_CURRENT_PWM_E0_PIN || P == MOTOR_CURRENT_PWM_E1_PIN || P == MOTOR_CURRENT_PWM_Z_PIN || P == MOTOR_CURRENT_PWM_XY_PIN) - #elif PIN_EXISTS(MOTOR_CURRENT_PWM_Z) - #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E_PIN || P == MOTOR_CURRENT_PWM_E0_PIN || P == MOTOR_CURRENT_PWM_E1_PIN || P == MOTOR_CURRENT_PWM_Z_PIN) - #else - #define PWM_CHK_MOTOR_CURRENT(P) (P == MOTOR_CURRENT_PWM_E_PIN || P == MOTOR_CURRENT_PWM_E0_PIN || P == MOTOR_CURRENT_PWM_E1_PIN) - #endif -#else - #define PWM_CHK_MOTOR_CURRENT(P) false -#endif - -#ifdef NUM_SERVOS - #if AVR_ATmega2560_FAMILY - #define PWM_CHK_SERVO(P) (P == 5 || (NUM_SERVOS > 12 && P == 6) || (NUM_SERVOS > 24 && P == 46)) // PWMS 3A, 4A & 5A - #elif AVR_ATmega2561_FAMILY - #define PWM_CHK_SERVO(P) (P == 5) // PWM3A - #elif AVR_ATmega1284_FAMILY - #define PWM_CHK_SERVO(P) false - #elif AVR_AT90USB1286_FAMILY - #define PWM_CHK_SERVO(P) (P == 16) // PWM3A - #elif AVR_ATmega328_FAMILY - #define PWM_CHK_SERVO(P) false - #endif -#else - #define PWM_CHK_SERVO(P) false -#endif - -#if ENABLED(BARICUDA) - #if HAS_HEATER_1 && HAS_HEATER_2 - #define PWM_CHK_HEATER(P) (P == HEATER_1_PIN || P == HEATER_2_PIN) - #elif HAS_HEATER_1 - #define PWM_CHK_HEATER(P) (P == HEATER_1_PIN) - #endif -#else - #define PWM_CHK_HEATER(P) false -#endif - -#define PWM_CHK(P) (PWM_CHK_HEATER(P) || PWM_CHK_SERVO(P) || PWM_CHK_MOTOR_CURRENT(P) || PWM_CHK_FAN_A(P) || PWM_CHK_FAN_B(P)) - -#endif // PWM_CHK is not used in Marlin - // define which hardware PWMs are available for the current CPU // all timer 1 PWMS deleted from this list because they are never available #if AVR_ATmega2560_FAMILY diff --git a/Marlin/src/HAL/AVR/inc/SanityCheck.h b/Marlin/src/HAL/AVR/inc/SanityCheck.h index ff1610f74164..45aa3a50b967 100644 --- a/Marlin/src/HAL/AVR/inc/SanityCheck.h +++ b/Marlin/src/HAL/AVR/inc/SanityCheck.h @@ -69,8 +69,8 @@ /** * Checks for SOFT PWM */ -#if HAS_FAN0 && FAN_PIN == 9 && DISABLED(FAN_SOFT_PWM) && ENABLED(SPEAKER) - #error "FAN_PIN 9 Hardware PWM uses Timer 2 which conflicts with Arduino AVR Tone Timer (for SPEAKER)." +#if HAS_FAN0 && FAN0_PIN == 9 && DISABLED(FAN_SOFT_PWM) && ENABLED(SPEAKER) + #error "FAN0_PIN 9 Hardware PWM uses Timer 2 which conflicts with Arduino AVR Tone Timer (for SPEAKER)." #error "Disable SPEAKER or enable FAN_SOFT_PWM." #endif diff --git a/Marlin/src/HAL/STM32/inc/SanityCheck.h b/Marlin/src/HAL/STM32/inc/SanityCheck.h index e8ddfa172005..eaad8db4d33d 100644 --- a/Marlin/src/HAL/STM32/inc/SanityCheck.h +++ b/Marlin/src/HAL/STM32/inc/SanityCheck.h @@ -55,7 +55,7 @@ * Check for common serial pin conflicts */ #define _CHECK_SERIAL_PIN(N) (( \ - BTN_EN1 == N || DOGLCD_CS == N || HEATER_BED_PIN == N || FAN_PIN == N || \ + BTN_EN1 == N || DOGLCD_CS == N || HEATER_BED_PIN == N || FAN0_PIN == N || \ SDIO_D2_PIN == N || SDIO_D3_PIN == N || SDIO_CK_PIN == N || SDIO_CMD_PIN == N \ )) #define CHECK_SERIAL_PIN(T,N) defined(UART##N##_##T##_PIN) && _CHECK_SERIAL_PIN(UART##N##_##T##_PIN) diff --git a/Marlin/src/HAL/STM32F1/timers.h b/Marlin/src/HAL/STM32F1/timers.h index 0cd807fc8479..557522f336a2 100644 --- a/Marlin/src/HAL/STM32F1/timers.h +++ b/Marlin/src/HAL/STM32F1/timers.h @@ -81,7 +81,7 @@ typedef uint16_t hal_timer_t; #endif #if MB(BTT_SKR_MINI_E3_V1_0, BTT_SKR_E3_DIP, BTT_SKR_MINI_E3_V1_2, MKS_ROBIN_LITE, MKS_ROBIN_E3D, MKS_ROBIN_E3) - // SKR Mini E3 boards use PA8 as FAN_PIN, so TIMER 1 is used for Fan PWM. + // SKR Mini E3 boards use PA8 as FAN0_PIN, so TIMER 1 is used for Fan PWM. #ifdef STM32_HIGH_DENSITY #define MF_TIMER_SERVO0 8 // tone.cpp uses Timer 4 #else diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index f9c5ed4e2b5c..604f025e1990 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -2631,16 +2631,12 @@ #define _NOT_E_AUTO(N,F) (E##N##_AUTO_FAN_PIN != FAN##F##_PIN) #define _HAS_FAN(F) (PIN_EXISTS(FAN##F) \ && CONTROLLER_FAN_PIN != FAN##F##_PIN \ - && _NOT_E_AUTO(0,F) \ - && _NOT_E_AUTO(1,F) \ - && _NOT_E_AUTO(2,F) \ - && _NOT_E_AUTO(3,F) \ - && _NOT_E_AUTO(4,F) \ - && _NOT_E_AUTO(5,F) \ - && _NOT_E_AUTO(6,F) \ - && _NOT_E_AUTO(7,F) \ + && _NOT_E_AUTO(0,F) && _NOT_E_AUTO(1,F) \ + && _NOT_E_AUTO(2,F) && _NOT_E_AUTO(3,F) \ + && _NOT_E_AUTO(4,F) && _NOT_E_AUTO(5,F) \ + && _NOT_E_AUTO(6,F) && _NOT_E_AUTO(7,F) \ && F < MAX_FANS) -#if PIN_EXISTS(FAN) +#if _HAS_FAN(0) #define HAS_FAN0 1 #endif #if _HAS_FAN(1) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index feb01e533ae7..6052fcb70c47 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -682,6 +682,8 @@ #error "PROBE_PT_[123]_[XY] is now defined using PROBE_PT_[123] with an array { x, y }." #elif defined(SQUARE_WAVE_STEPPING) #error "SQUARE_WAVE_STEPPING is now EDGE_STEPPING." +#elif defined(FAN_PIN) + #error "FAN_PIN is now FAN0_PIN." #endif // L64xx stepper drivers have been removed @@ -2371,21 +2373,21 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS */ #if HAS_AUTO_FAN #if HAS_FAN0 - #if PIN_EXISTS(E0_AUTO_FAN) && E0_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set E0_AUTO_FAN_PIN equal to FAN_PIN." - #elif PIN_EXISTS(E1_AUTO_FAN) && E1_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set E1_AUTO_FAN_PIN equal to FAN_PIN." - #elif PIN_EXISTS(E2_AUTO_FAN) && E2_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set E2_AUTO_FAN_PIN equal to FAN_PIN." - #elif PIN_EXISTS(E3_AUTO_FAN) && E3_AUTO_FAN_PIN == FAN_PIN - #error "You cannot set E3_AUTO_FAN_PIN equal to FAN_PIN." + #if PIN_EXISTS(E0_AUTO_FAN) && E0_AUTO_FAN_PIN == FAN0_PIN + #error "You cannot set E0_AUTO_FAN_PIN equal to FAN0_PIN." + #elif PIN_EXISTS(E1_AUTO_FAN) && E1_AUTO_FAN_PIN == FAN0_PIN + #error "You cannot set E1_AUTO_FAN_PIN equal to FAN0_PIN." + #elif PIN_EXISTS(E2_AUTO_FAN) && E2_AUTO_FAN_PIN == FAN0_PIN + #error "You cannot set E2_AUTO_FAN_PIN equal to FAN0_PIN." + #elif PIN_EXISTS(E3_AUTO_FAN) && E3_AUTO_FAN_PIN == FAN0_PIN + #error "You cannot set E3_AUTO_FAN_PIN equal to FAN0_PIN." #endif #endif #endif #if HAS_FAN0 - #if CONTROLLER_FAN_PIN == FAN_PIN - #error "You cannot set CONTROLLER_FAN_PIN equal to FAN_PIN." + #if CONTROLLER_FAN_PIN == FAN0_PIN + #error "You cannot set CONTROLLER_FAN_PIN equal to FAN0_PIN." #elif ENABLED(FAN_SOFT_PWM_REQUIRED) && DISABLED(FAN_SOFT_PWM) #error "FAN_SOFT_PWM is required for your board. Enable it to continue." #endif @@ -2427,8 +2429,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE, "Movement bounds (X_MIN_POS, X_MAX_POS #if NEED_CASE_LIGHT_PIN #if !PIN_EXISTS(CASE_LIGHT) #error "CASE_LIGHT_ENABLE requires CASE_LIGHT_PIN, CASE_LIGHT_USE_NEOPIXEL, or CASE_LIGHT_USE_RGB_LED." - #elif CASE_LIGHT_PIN == FAN_PIN - #error "CASE_LIGHT_PIN conflicts with FAN_PIN. Resolve before continuing." + #elif CASE_LIGHT_PIN == FAN0_PIN + #error "CASE_LIGHT_PIN conflicts with FAN0_PIN. Resolve before continuing." #endif #endif @@ -4191,11 +4193,11 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive."); #elif !(defined(SPEED_POWER_MIN) && defined(SPEED_POWER_MAX) && defined(SPEED_POWER_STARTUP)) #error "SPINDLE_LASER_USE_PWM equation constant(s) missing." #elif _PIN_CONFLICT(X_MIN) - #error "SPINDLE_LASER_USE_PWM pin conflicts with X_MIN_PIN." + #error "SPINDLE_LASER_PWM_PIN conflicts with X_MIN_PIN." #elif _PIN_CONFLICT(X_MAX) - #error "SPINDLE_LASER_USE_PWM pin conflicts with X_MAX_PIN." + #error "SPINDLE_LASER_PWM_PIN conflicts with X_MAX_PIN." #elif _PIN_CONFLICT(Z_STEP) - #error "SPINDLE_LASER_USE_PWM pin conflicts with Z_STEP_PIN." + #error "SPINDLE_LASER_PWM_PIN conflicts with Z_STEP_PIN." #elif _PIN_CONFLICT(CASE_LIGHT) #error "SPINDLE_LASER_PWM_PIN conflicts with CASE_LIGHT_PIN." #elif _PIN_CONFLICT(E0_AUTO_FAN) @@ -4215,7 +4217,7 @@ static_assert(_PLUS_TEST(4), "HOMING_FEEDRATE_MM_M values must be positive."); #elif _PIN_CONFLICT(E7_AUTO_FAN) #error "SPINDLE_LASER_PWM_PIN conflicts with E7_AUTO_FAN_PIN." #elif _PIN_CONFLICT(FAN) - #error "SPINDLE_LASER_PWM_PIN conflicts with FAN_PIN." + #error "SPINDLE_LASER_PWM_PIN conflicts with FAN0_PIN." #elif _PIN_CONFLICT(FAN1) #error "SPINDLE_LASER_PWM_PIN conflicts with FAN1_PIN." #elif _PIN_CONFLICT(FAN2) diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 2d9e4fff7ce0..68210fde961e 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -2691,7 +2691,7 @@ void Temperature::init() { #endif #if HAS_FAN0 - INIT_FAN_PIN(FAN_PIN); + INIT_FAN_PIN(FAN0_PIN); #endif #if HAS_FAN1 INIT_FAN_PIN(FAN1_PIN); diff --git a/Marlin/src/pins/esp32/pins_E4D.h b/Marlin/src/pins/esp32/pins_E4D.h index d12b5276b7be..15b697a85b2c 100644 --- a/Marlin/src/pins/esp32/pins_E4D.h +++ b/Marlin/src/pins/esp32/pins_E4D.h @@ -90,7 +90,7 @@ // Heaters / Fans // #define HEATER_0_PIN 2 -#define FAN_PIN 0 +#define FAN0_PIN 0 #define HEATER_BED_PIN 15 // diff --git a/Marlin/src/pins/esp32/pins_ENWI_ESPNP.h b/Marlin/src/pins/esp32/pins_ENWI_ESPNP.h index 80923d972deb..e911900b1d09 100644 --- a/Marlin/src/pins/esp32/pins_ENWI_ESPNP.h +++ b/Marlin/src/pins/esp32/pins_ENWI_ESPNP.h @@ -101,7 +101,7 @@ // General use mosfets, useful for things like pumps and solenoids // Shift register pins 128, 129, 130 and 131 are broken out and can be used -#define FAN_PIN 132 +#define FAN0_PIN 132 #define FAN1_PIN 134 #define FAN2_PIN 135 #define FAN3_PIN 136 diff --git a/Marlin/src/pins/esp32/pins_ESP32.h b/Marlin/src/pins/esp32/pins_ESP32.h index 266de7e9f60e..1c01be8a88bc 100644 --- a/Marlin/src/pins/esp32/pins_ESP32.h +++ b/Marlin/src/pins/esp32/pins_ESP32.h @@ -79,7 +79,7 @@ // Heaters / Fans // #define HEATER_0_PIN 2 -#define FAN_PIN 13 +#define FAN0_PIN 13 #define HEATER_BED_PIN 4 // SPI diff --git a/Marlin/src/pins/esp32/pins_ESPA_common.h b/Marlin/src/pins/esp32/pins_ESPA_common.h index ca949cdf9716..36068150f720 100644 --- a/Marlin/src/pins/esp32/pins_ESPA_common.h +++ b/Marlin/src/pins/esp32/pins_ESPA_common.h @@ -68,7 +68,7 @@ // Heaters / Fans // #define HEATER_0_PIN 2 -#define FAN_PIN 13 +#define FAN0_PIN 13 #define HEATER_BED_PIN 4 // diff --git a/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h b/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h index 37ce4ee94e56..791ddcab41f1 100644 --- a/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h +++ b/Marlin/src/pins/esp32/pins_MKS_TINYBEE.h @@ -104,7 +104,7 @@ // #define HEATER_0_PIN 145 #define HEATER_1_PIN 146 -#define FAN_PIN 147 +#define FAN0_PIN 147 #define FAN1_PIN 148 #define HEATER_BED_PIN 144 diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index f372de9e0110..b95e54841e0e 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -102,7 +102,7 @@ // Heaters / Fans // #define HEATER_0_PIN 145 // 2 -#define FAN_PIN 146 // 15 +#define FAN0_PIN 146 // 15 #define HEATER_BED_PIN 144 // 4 #define CONTROLLER_FAN_PIN 147 diff --git a/Marlin/src/pins/esp32/pins_PANDA_common.h b/Marlin/src/pins/esp32/pins_PANDA_common.h index afc9a78aec01..232580567610 100644 --- a/Marlin/src/pins/esp32/pins_PANDA_common.h +++ b/Marlin/src/pins/esp32/pins_PANDA_common.h @@ -74,7 +74,7 @@ // #define HEATER_0_PIN 108 #define HEATER_BED_PIN 109 -#define FAN_PIN 118 // FAN0 +#define FAN0_PIN 118 // FAN0 #define FAN1_PIN 119 // FAN1 #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 3e8814c3ee9d..bfef46c9459b 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -161,21 +161,21 @@ #define HEATER_0_PIN MOSFET_A_PIN #if FET_ORDER_EFB // Hotend, Fan, Bed - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EEF // Hotend, Hotend, Fan #define HEATER_1_PIN MOSFET_B_PIN - #define FAN_PIN MOSFET_C_PIN + #define FAN0_PIN MOSFET_C_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed #define HEATER_1_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #elif FET_ORDER_EFF // Hotend, Fan, Fan - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #define FAN1_PIN MOSFET_C_PIN #elif FET_ORDER_SF // Spindle, Fan - #define FAN_PIN MOSFET_C_PIN + #define FAN0_PIN MOSFET_C_PIN #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #define HEATER_BED_PIN MOSFET_C_PIN #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #define FAN1_PIN MOSFET_D_PIN @@ -184,8 +184,8 @@ #endif #endif -#ifndef FAN_PIN - #define FAN_PIN 4 // IO pin. Buffer needed +#ifndef FAN0_PIN + #define FAN0_PIN 4 // IO pin. Buffer needed #endif // diff --git a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h index 657eb8a0466c..ca8010493bb9 100644 --- a/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h +++ b/Marlin/src/pins/lpc1768/pins_AZSMZ_MINI.h @@ -82,8 +82,8 @@ // EFB #define HEATER_0_PIN P2_04 #define HEATER_BED_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P2_07 +#ifndef FAN0_PIN + #define FAN0_PIN P2_07 #endif #define FAN1_PIN P0_26 diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index 7215150d0b7b..7115cea0bd48 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -97,8 +97,8 @@ // #define HEATER_0_PIN P2_07 #define HEATER_BED_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P2_04 +#ifndef FAN0_PIN + #define FAN0_PIN P2_04 #endif // @@ -168,7 +168,7 @@ * PWM1.4 P1_23 * PWM1.4 P2_3 E0_STEP_PIN * PWM1.5 P1_24 X_MIN_PIN - * PWM1.5 P2_4 FAN_PIN + * PWM1.5 P2_4 FAN0_PIN * PWM1.6 P1_26 Y_MIN_PIN * PWM1.6 P2_5 HEATER_BED_PIN */ diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index 2c0d52ef9a10..d5f1d0a29616 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -74,8 +74,8 @@ // #define HEATER_0_PIN P2_07 #define HEATER_BED_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P2_04 +#ifndef FAN0_PIN + #define FAN0_PIN P2_04 #endif // @@ -147,7 +147,7 @@ * PWM1.4 P1_23 * PWM1.4 P2_3 E0_STEP_PIN * PWM1.5 P1_24 X_MIN_PIN - * PWM1.5 P2_4 FAN_PIN + * PWM1.5 P2_4 FAN0_PIN * PWM1.6 P1_26 Y_MIN_PIN * PWM1.6 P2_5 HEATER_BED_PIN */ diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index ec74cc640e85..2b01b4ce6f9a 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -101,8 +101,8 @@ #define HEATER_1_PIN P2_04 #endif #endif -#ifndef FAN_PIN - #define FAN_PIN P2_03 +#ifndef FAN0_PIN + #define FAN0_PIN P2_03 #endif #ifndef HEATER_BED_PIN #define HEATER_BED_PIN P2_05 diff --git a/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h b/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h index 9e62be8edb57..43a9b786eb7d 100644 --- a/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h +++ b/Marlin/src/pins/lpc1768/pins_EMOTRONIC.h @@ -87,7 +87,7 @@ #define HEATER_0_PIN P2_06 // (H2: 10A shared) #define HEATER_1_PIN P2_07 // (H3: 10A shared) -#define FAN_PIN P2_11 // (FAN0: 1A) +#define FAN0_PIN P2_11 // (FAN0: 1A) #define FAN1_PIN P2_13 // (FAN1: 1A) // diff --git a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h index aedbd7be606e..63760d962bc9 100644 --- a/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h +++ b/Marlin/src/pins/lpc1768/pins_GMARSH_X6_REV1.h @@ -123,7 +123,7 @@ // #define HEATER_BED_PIN P1_19 // Not a PWM pin, software PWM required #define HEATER_0_PIN P3_26 // PWM1[3] -#define FAN_PIN P3_25 // Part cooling fan - connected to PWM1[2] +#define FAN0_PIN P3_25 // Part cooling fan - connected to PWM1[2] #define E0_AUTO_FAN_PIN P0_27 // Extruder cooling fan // diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index 9f67a01c4ebd..9218bb168d6f 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -101,8 +101,8 @@ #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 #define HEATER_1_PIN P2_06 -#ifndef FAN_PIN - #define FAN_PIN P2_04 +#ifndef FAN0_PIN + #define FAN0_PIN P2_04 #endif // diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index 1235e44ec9a0..155d53c7803f 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -209,8 +209,8 @@ #define HEATER_1_PIN P2_06 #endif #endif -#ifndef FAN_PIN - #define FAN_PIN P2_04 +#ifndef FAN0_PIN + #define FAN0_PIN P2_04 #endif // diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 893a8a755b2b..b9edef8678db 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -203,15 +203,15 @@ #endif #endif -#ifndef FAN_PIN +#ifndef FAN0_PIN #if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN MOSFET_C_PIN + #define FAN0_PIN MOSFET_C_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed - #define FAN_PIN P1_18 // (4) IO pin. Buffer needed + #define FAN0_PIN P1_18 // (4) IO pin. Buffer needed #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #endif #endif diff --git a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h index 30cd76b9a22d..996cb52c6cfa 100644 --- a/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h +++ b/Marlin/src/pins/lpc1768/pins_SELENA_COMPACT.h @@ -87,8 +87,8 @@ #define HEATER_BED2_PIN P2_04 #define HEATER_0_PIN P2_07 #define HEATER_1_PIN P2_06 -#ifndef FAN_PIN - #define FAN_PIN P1_24 +#ifndef FAN0_PIN + #define FAN0_PIN P1_24 #endif #define FAN1_PIN P1_26 diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h index a9c61cb8c9e6..9dfb80772fb2 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_GT.h @@ -100,8 +100,8 @@ #define HEATER_BED_PIN P2_07 #define HEATER_0_PIN P2_04 #define HEATER_1_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P0_26 +#ifndef FAN0_PIN + #define FAN0_PIN P0_26 #endif #define FAN1_PIN P1_22 diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index eabb338504f8..2d96194db58c 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -104,8 +104,8 @@ // #define HEATER_BED_PIN P2_07 #define HEATER_0_PIN P2_05 -#ifndef FAN_PIN - #define FAN_PIN P0_26 +#ifndef FAN0_PIN + #define FAN0_PIN P0_26 #endif #define FAN1_PIN P1_25 diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index f62818dd9f67..70f7f748c064 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -179,7 +179,7 @@ #define HEATER_0_PIN P2_03 // EXTRUDER 0 #define HEATER_1_PIN P2_04 // EXTRUDER 1 #define HEATER_BED_PIN P2_05 // BED -#define FAN_PIN P2_01 +#define FAN0_PIN P2_01 #define FAN1_PIN P2_02 #ifndef CONTROLLER_FAN_PIN diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index 5c9355de2917..fa389f49247c 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -94,8 +94,8 @@ // #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 // FET 1 -#ifndef FAN_PIN - #define FAN_PIN P2_06 // FET 3 +#ifndef FAN0_PIN + #define FAN0_PIN P2_06 // FET 3 #endif // @@ -125,7 +125,7 @@ #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 #undef HEATER_BED_PIN #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET - #undef FAN_PIN + #undef FAN0_PIN #define SPINDLE_DIR_PIN P2_06 // FET 3 #endif diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index 5083a0ed486d..2d44a3859b48 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -119,8 +119,8 @@ #define HEATER_0_PIN P2_07 // FET 1 #define HEATER_1_PIN P1_23 // FET 2 #define HEATER_2_PIN P1_22 // FET 3 -#ifndef FAN_PIN - #define FAN_PIN P2_06 // FET 4 +#ifndef FAN0_PIN + #define FAN0_PIN P2_06 // FET 4 #endif // @@ -152,7 +152,7 @@ #if HAS_CUTTER #undef HEATER_0_PIN #undef HEATER_BED_PIN - #undef FAN_PIN + #undef FAN0_PIN #define SPINDLE_LASER_ENA_PIN P2_07 // FET 1 #define SPINDLE_LASER_PWM_PIN P2_05 // Bed FET #define SPINDLE_DIR_PIN P2_06 // FET 4 diff --git a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h index ed0ce30eb305..796df12e754f 100644 --- a/Marlin/src/pins/lpc1769/pins_FLY_CDY.h +++ b/Marlin/src/pins/lpc1769/pins_FLY_CDY.h @@ -144,8 +144,8 @@ #define HEATER_0_PIN P3_25 #define HEATER_1_PIN P1_20 #define HEATER_2_PIN P1_23 -#ifndef FAN_PIN - #define FAN_PIN P1_18 +#ifndef FAN0_PIN + #define FAN0_PIN P1_18 #endif #define FAN1_PIN P1_21 #define FAN2_PIN P1_24 diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index 54b771d318bf..f49aae0c45f3 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -229,8 +229,8 @@ #define FAN2_PIN P2_06 // HE1 for FAN3 #endif #endif -#ifndef FAN_PIN - #define FAN_PIN P2_04 // FAN1 +#ifndef FAN0_PIN + #define FAN0_PIN P2_04 // FAN1 #endif #ifndef FAN1_PIN #define FAN1_PIN P1_04 // FAN2 diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index 124c8f63c2e8..c8526611d086 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -85,8 +85,8 @@ #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 #define HEATER_1_PIN P1_23 -#ifndef FAN_PIN - #define FAN_PIN P2_06 +#ifndef FAN0_PIN + #define FAN0_PIN P2_06 #endif #define FAN1_PIN P2_04 diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index f794e178f911..4e5d827f24c1 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -119,8 +119,8 @@ // #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 -#ifndef FAN_PIN - #define FAN_PIN P2_06 +#ifndef FAN0_PIN + #define FAN0_PIN P2_06 #endif #define FAN1_PIN P1_22 diff --git a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h index e81295a6530a..92c5a6f12392 100644 --- a/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h +++ b/Marlin/src/pins/mega/pins_CHEAPTRONICv2.h @@ -86,8 +86,8 @@ #define HEATER_1_PIN 7 #define HEATER_2_PIN 8 #define HEATER_BED_PIN 9 -#ifndef FAN_PIN - #define FAN_PIN 3 +#ifndef FAN0_PIN + #define FAN0_PIN 3 #endif #define FAN2_PIN 58 // additional fan or light control output diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h index d996635c8c94..60d68a8607ba 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_11.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_11.h @@ -93,8 +93,8 @@ #define HEATER_3_PIN 46 #define HEATER_BED_PIN 2 -#ifndef FAN_PIN - //#define FAN_PIN 7 // common PWM pin for all tools +#ifndef FAN0_PIN + //#define FAN0_PIN 7 // common PWM pin for all tools #endif // diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h index ea82fe429c33..5c92f92e29d6 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_12.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_12.h @@ -93,8 +93,8 @@ #define HEATER_3_PIN 3 #define HEATER_BED_PIN 24 -#ifndef FAN_PIN - #define FAN_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools +#ifndef FAN0_PIN + #define FAN0_PIN 5 // 5 is PWMtool3 -> 7 is common PWM pin for all tools #endif // diff --git a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h index c77e711f9c22..bbb0385844f9 100644 --- a/Marlin/src/pins/mega/pins_CNCONTROLS_15.h +++ b/Marlin/src/pins/mega/pins_CNCONTROLS_15.h @@ -87,7 +87,7 @@ // // Fans // -#define FAN_PIN 8 +#define FAN0_PIN 8 // // Auto fans diff --git a/Marlin/src/pins/mega/pins_EINSTART-S.h b/Marlin/src/pins/mega/pins_EINSTART-S.h index 274684f337d2..813cbf7dc42f 100644 --- a/Marlin/src/pins/mega/pins_EINSTART-S.h +++ b/Marlin/src/pins/mega/pins_EINSTART-S.h @@ -70,7 +70,7 @@ #define HEATER_0_PIN 83 #define HEATER_BED_PIN 38 -#define FAN_PIN 82 +#define FAN0_PIN 82 // // Misc. Functions diff --git a/Marlin/src/pins/mega/pins_ELEFU_3.h b/Marlin/src/pins/mega/pins_ELEFU_3.h index 6cf9e1b4e1af..71797a30fff8 100644 --- a/Marlin/src/pins/mega/pins_ELEFU_3.h +++ b/Marlin/src/pins/mega/pins_ELEFU_3.h @@ -92,8 +92,8 @@ #define HEATER_2_PIN 17 // 12V PWM3 #define HEATER_BED_PIN 44 // DOUBLE 12V PWM -#ifndef FAN_PIN - #define FAN_PIN 16 // 5V PWM +#ifndef FAN0_PIN + #define FAN0_PIN 16 // 5V PWM #endif // diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index bb251dfb4e18..99e2031706ec 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -95,8 +95,8 @@ #define HEATER_0_PIN 2 #define HEATER_1_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 7 +#ifndef FAN0_PIN + #define FAN0_PIN 7 #endif // diff --git a/Marlin/src/pins/mega/pins_GT2560_V3.h b/Marlin/src/pins/mega/pins_GT2560_V3.h index 5d2436b68406..e4e51c30b374 100644 --- a/Marlin/src/pins/mega/pins_GT2560_V3.h +++ b/Marlin/src/pins/mega/pins_GT2560_V3.h @@ -138,7 +138,7 @@ #define HEATER_1_PIN 3 #define HEATER_2_PIN 2 #define HEATER_BED_PIN 4 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN1_PIN 8 #define FAN2_PIN 7 diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index 1b3b7b29afe6..ea197e50dbcf 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -92,8 +92,8 @@ #define HEATER_1_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释 +#ifndef FAN0_PIN + #define FAN0_PIN 7 //默认不使用PWM_FAN冷却喷嘴，如果需要，则取消注释 #endif // diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h index ec466fb09faa..903849a14005 100644 --- a/Marlin/src/pins/mega/pins_INTAMSYS40.h +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -99,7 +99,7 @@ #define HEATER_0_PIN 2 // PWM #define HEATER_BED_PIN 4 // PWM #define HEATER_CHAMBER_PIN 3 // PWM -#define FAN_PIN 7 // PWM +#define FAN0_PIN 7 // PWM // // Misc. Functions diff --git a/Marlin/src/pins/mega/pins_LEAPFROG.h b/Marlin/src/pins/mega/pins_LEAPFROG.h index 3762ea98f051..d986728e7273 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG.h @@ -79,7 +79,7 @@ #define HEATER_2_PIN 11 // 13 #define HEATER_BED_PIN 10 // 14/15 -#define FAN_PIN 7 +#define FAN0_PIN 7 // // Misc. Functions diff --git a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h index 7be96c5defc5..7b3cb2b723db 100644 --- a/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h +++ b/Marlin/src/pins/mega/pins_LEAPFROG_XEED2015.h @@ -104,7 +104,7 @@ #define HEATER_1_PIN 9 // Misc Connector, pins 5 and 6 (Out3) #define HEATER_BED_PIN 6 // Misc Connector, pins 9(-) and 10(+) (OutA) -#define FAN_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4) +#define FAN0_PIN 10 // Misc Connector, pins 7(-) and 8 (+) (Out4) #define LED_PIN 13 diff --git a/Marlin/src/pins/mega/pins_MALYAN_M180.h b/Marlin/src/pins/mega/pins_MALYAN_M180.h index 3ef606de7723..4eb7928825cd 100644 --- a/Marlin/src/pins/mega/pins_MALYAN_M180.h +++ b/Marlin/src/pins/mega/pins_MALYAN_M180.h @@ -93,8 +93,8 @@ #define HEATER_1_PIN 11 #define HEATER_BED_PIN 45 -#ifndef FAN_PIN - #define FAN_PIN 7 // M106 Sxxx command supported and tested. M107 as well. +#ifndef FAN0_PIN + #define FAN0_PIN 7 // M106 Sxxx command supported and tested. M107 as well. #endif #ifndef FAN_PIN1 diff --git a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h index f45da25f623a..19808817c93d 100644 --- a/Marlin/src/pins/mega/pins_MEGACONTROLLER.h +++ b/Marlin/src/pins/mega/pins_MEGACONTROLLER.h @@ -114,8 +114,8 @@ #define HEATER_1_PIN 34 #define HEATER_BED_PIN 28 -#ifndef FAN_PIN - #define FAN_PIN 39 +#ifndef FAN0_PIN + #define FAN0_PIN 39 #endif #define FAN1_PIN 35 #define FAN2_PIN 36 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS.h b/Marlin/src/pins/mega/pins_MEGATRONICS.h index a51615e3d91e..b038c9935c26 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS.h @@ -89,8 +89,8 @@ #define HEATER_1_PIN 8 #define HEATER_BED_PIN 10 -#ifndef FAN_PIN - #define FAN_PIN 7 // IO pin. Buffer needed +#ifndef FAN0_PIN + #define FAN0_PIN 7 // IO pin. Buffer needed #endif // diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 3f7afe562b72..5ebcbefe0883 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -103,8 +103,8 @@ #define HEATER_1_PIN 8 #define HEATER_BED_PIN 10 -#ifndef FAN_PIN - #define FAN_PIN 7 +#ifndef FAN0_PIN + #define FAN0_PIN 7 #endif #define FAN1_PIN 6 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h index b194c31b5d91..b3edfc5e17a7 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_3.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_3.h @@ -127,8 +127,8 @@ #define HEATER_2_PIN 8 #define HEATER_BED_PIN 10 -#ifndef FAN_PIN - #define FAN_PIN 6 +#ifndef FAN0_PIN + #define FAN0_PIN 6 #endif #define FAN1_PIN 7 diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 221f5124ae39..0a1553c64ecf 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -166,8 +166,8 @@ #ifndef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN MOSFET_D_PIN -#elif !defined(FAN_PIN) - #define FAN_PIN MOSFET_D_PIN +#elif !defined(FAN0_PIN) + #define FAN0_PIN MOSFET_D_PIN #endif #ifndef E1_AUTO_FAN_PIN diff --git a/Marlin/src/pins/mega/pins_MINITRONICS.h b/Marlin/src/pins/mega/pins_MINITRONICS.h index ddf6d2047deb..5145cb496d0b 100644 --- a/Marlin/src/pins/mega/pins_MINITRONICS.h +++ b/Marlin/src/pins/mega/pins_MINITRONICS.h @@ -90,8 +90,8 @@ #define HEATER_1_PIN 8 // EXTRUDER 2 #define HEATER_BED_PIN 3 // BED -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif // diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 01c02dafe24f..3bccbbc7410e 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -95,7 +95,7 @@ #define HEATER_1_PIN 3 #define HEATER_BED_PIN 4 -#define FAN_PIN 7 // material cooling fan +#define FAN0_PIN 7 // material cooling fan // // SD Card diff --git a/Marlin/src/pins/mega/pins_PICA.h b/Marlin/src/pins/mega/pins_PICA.h index 109859388c60..3926978e6d5e 100644 --- a/Marlin/src/pins/mega/pins_PICA.h +++ b/Marlin/src/pins/mega/pins_PICA.h @@ -108,8 +108,8 @@ #endif #define HEATER_BED_PIN 8 // HEAT-BED -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #ifndef FAN_2_PIN #define FAN_2_PIN 7 diff --git a/Marlin/src/pins/mega/pins_PICAOLD.h b/Marlin/src/pins/mega/pins_PICAOLD.h index 961462fc5279..e15b4637b7f3 100644 --- a/Marlin/src/pins/mega/pins_PICAOLD.h +++ b/Marlin/src/pins/mega/pins_PICAOLD.h @@ -27,7 +27,7 @@ #define HEATER_0_PIN 9 // E0 #define HEATER_1_PIN 10 // E1 -#define FAN_PIN 11 +#define FAN0_PIN 11 #define FAN2_PIN 12 #include "pins_PICA.h" diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h index 6dc0c3963fd8..dd26a2714c3a 100644 --- a/Marlin/src/pins/mega/pins_SILVER_GATE.h +++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h @@ -57,8 +57,8 @@ #define FIL_RUNOUT_PIN 34 // X_MAX unless overridden #endif -#ifndef FAN_PIN - #define FAN_PIN 5 +#ifndef FAN0_PIN + #define FAN0_PIN 5 #endif #define HEATER_0_PIN 7 diff --git a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h index 6ab6c4ceb9b2..e224e061787f 100644 --- a/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h +++ b/Marlin/src/pins/mega/pins_WANHAO_ONEPLUS.h @@ -76,7 +76,7 @@ // #define HEATER_0_PIN 4 #define HEATER_BED_PIN 44 -#define FAN_PIN 12 // IO pin. Buffer needed +#define FAN0_PIN 12 // IO pin. Buffer needed // // SD Card diff --git a/Marlin/src/pins/mega/pins_WEEDO_62A.h b/Marlin/src/pins/mega/pins_WEEDO_62A.h index 4165d9e2341b..7b417c19a113 100644 --- a/Marlin/src/pins/mega/pins_WEEDO_62A.h +++ b/Marlin/src/pins/mega/pins_WEEDO_62A.h @@ -74,7 +74,7 @@ // #define HEATER_0_PIN 10 // EXTRUDER 1 #define HEATER_BED_PIN 8 // BED -#define FAN_PIN 4 // IO pin. Buffer needed +#define FAN0_PIN 4 // IO pin. Buffer needed // // Misc. Functions diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index 27f20b92f7b2..16dd2a0c4569 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -739,8 +739,8 @@ // // Fans // -#if PIN_EXISTS(FAN) - REPORT_NAME_DIGITAL(__LINE__, FAN_PIN) +#if PIN_EXISTS(FAN0) + REPORT_NAME_DIGITAL(__LINE__, FAN0_PIN) #endif #if PIN_EXISTS(FAN1) REPORT_NAME_DIGITAL(__LINE__, FAN1_PIN) diff --git a/Marlin/src/pins/pins_postprocess.h b/Marlin/src/pins/pins_postprocess.h index 8906c3cafb23..708eb7f8e6cf 100644 --- a/Marlin/src/pins/pins_postprocess.h +++ b/Marlin/src/pins/pins_postprocess.h @@ -377,10 +377,9 @@ #undef W_SERIAL_RX_PIN #endif -#ifndef FAN_PIN - #define FAN_PIN -1 +#ifndef FAN0_PIN + #define FAN0_PIN -1 #endif -#define FAN0_PIN FAN_PIN #ifndef FAN1_PIN #define FAN1_PIN -1 #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index c28fbd059c60..be1af14bb18d 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -128,11 +128,11 @@ #define HEATER_0_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN +#ifndef FAN0_PIN #ifdef MK3_FAN_PINS - #define FAN_PIN 6 + #define FAN0_PIN 6 #else - #define FAN_PIN 8 + #define FAN0_PIN 8 #endif #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index dc91c47e9a1b..315a17ee0300 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -135,8 +135,8 @@ #define HEATER_0_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 8 +#ifndef FAN0_PIN + #define FAN0_PIN 8 #endif #define FAN1_PIN 6 diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index 353fbd664111..da55c1ec0711 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -109,8 +109,8 @@ #endif #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 8 +#ifndef FAN0_PIN + #define FAN0_PIN 8 #endif #define FAN1_PIN 6 diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 3a26811538c9..7c70c7c753d4 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -140,8 +140,8 @@ #define HEATER_2_PIN 6 #define HEATER_BED_PIN 3 -#ifndef FAN_PIN - #define FAN_PIN 8 +#ifndef FAN0_PIN + #define FAN0_PIN 8 #endif #ifndef FAN1_PIN #define FAN1_PIN 6 diff --git a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h index ca073f5ab991..2230eaa35bc9 100644 --- a/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h +++ b/Marlin/src/pins/rambo/pins_SCOOVO_X9H.h @@ -105,8 +105,8 @@ #define HEATER_1_PIN 7 #define HEATER_BED_PIN 3 -#ifndef FAN_PIN - #define FAN_PIN 8 +#ifndef FAN0_PIN + #define FAN0_PIN 8 #endif #define FAN1_PIN 6 #define FAN2_PIN 2 diff --git a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h index 2c666a6f16a4..b0eee92c7218 100644 --- a/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h +++ b/Marlin/src/pins/ramps/pins_AZTEEG_X3_PRO.h @@ -56,8 +56,8 @@ #define Y_STOP_PIN 14 #define Z_STOP_PIN 18 -#ifndef FAN_PIN - #define FAN_PIN 6 +#ifndef FAN0_PIN + #define FAN0_PIN 6 #endif #if ENABLED(CASE_LIGHT_ENABLE) && !PIN_EXISTS(CASE_LIGHT) diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 7e370a398bcd..a147eba9fd35 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -72,7 +72,7 @@ #define HEATER_0_PIN 4 // PG5 / PWM4 #define HEATER_BED_PIN 3 // PE5 / PWM3 -#define FAN_PIN 5 // PE3 / PWM5 +#define FAN0_PIN 5 // PE3 / PWM5 // // Misc. Functions diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h index 7bed4c088433..f9e4517a1183 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR.h @@ -129,8 +129,8 @@ #define HEATER_1_PIN 7 #define HEATER_BED_PIN 8 -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #ifndef FIL_RUNOUT_PIN diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h index f0e86ac4a7f3..d79eb8041cbe 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_RAPTOR2.h @@ -29,7 +29,7 @@ #define BOARD_INFO_NAME "Formbot Raptor2" #define DEFAULT_MACHINE_NAME BOARD_INFO_NAME -#define FAN_PIN 6 +#define FAN0_PIN 6 #ifndef FIL_RUNOUT_PIN #define FIL_RUNOUT_PIN 22 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index a5ca7e86073f..e671184a53a2 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -126,7 +126,7 @@ #define HEATER_1_PIN 7 #define HEATER_BED_PIN 58 -#define FAN_PIN 9 +#define FAN0_PIN 9 #if HAS_FILAMENT_SENSOR #define FIL_RUNOUT_PIN 4 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h index 2fa3d60f6722..3babc257b4c0 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX3.h @@ -132,7 +132,7 @@ #define HEATER_1_PIN 7 #define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN1_PIN 12 #define FIL_RUNOUT_PIN 22 diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 9f23647c42b2..9cae3797c3f6 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -185,7 +185,7 @@ #define HEATER_2_PIN 7 #define HEATER_BED_PIN 8 -#define FAN_PIN 44 +#define FAN0_PIN 44 #define FAN1_PIN 45 #define FAN2_PIN 46 diff --git a/Marlin/src/pins/ramps/pins_K8600.h b/Marlin/src/pins/ramps/pins_K8600.h index 3081b0436188..2ffa8c6b101f 100644 --- a/Marlin/src/pins/ramps/pins_K8600.h +++ b/Marlin/src/pins/ramps/pins_K8600.h @@ -49,7 +49,7 @@ // Heaters / Fans // #define HEATER_BED_PIN -1 -#define FAN_PIN 8 +#define FAN0_PIN 8 // // Misc. Functions diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index a9669764cef1..6c4fa1cc7ca1 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -74,7 +74,7 @@ // Heaters / Fans // #define HEATER_0_PIN 10 -#define FAN_PIN 8 +#define FAN0_PIN 8 #define CONTROLLER_FAN_PIN 9 // diff --git a/Marlin/src/pins/ramps/pins_MKS_BASE_common.h b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h index 4d3b9844c8ec..b0f0866bc66a 100644 --- a/Marlin/src/pins/ramps/pins_MKS_BASE_common.h +++ b/Marlin/src/pins/ramps/pins_MKS_BASE_common.h @@ -35,7 +35,7 @@ // Heaters / Fans // #define MOSFET_B_PIN 7 - #define FAN_PIN 9 + #define FAN0_PIN 9 // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h index 3020dc8c31ee..4cf66ed2cd41 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_13.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_13.h @@ -43,7 +43,7 @@ // Heaters / Fans // #define MOSFET_B_PIN 7 -#define FAN_PIN 9 +#define FAN0_PIN 9 // // PSU / SERVO diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h index 9c84c18300ec..5d1136e4ef1a 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_L.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L.h @@ -41,7 +41,7 @@ #define MOSFET_A_PIN 9 // HE0 #define MOSFET_B_PIN 8 // HE1 #define MOSFET_C_PIN 10 // HBED -#define FAN_PIN 7 +#define FAN0_PIN 7 // // CS Pins wired to avoid conflict with the LCD diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h index 543210b117ae..931843de7c73 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V2.h @@ -38,7 +38,7 @@ // Heaters / Fans // #define MOSFET_B_PIN 7 -#define FAN_PIN 9 +#define FAN0_PIN 9 // // CS Pins wired to avoid conflict with the LCD diff --git a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h index d1a1b30995f6..6cea92c15b78 100644 --- a/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h +++ b/Marlin/src/pins/ramps/pins_MKS_GEN_L_V21.h @@ -38,7 +38,7 @@ // Heaters / Fans // #define MOSFET_B_PIN 7 -#define FAN_PIN 9 +#define FAN0_PIN 9 // // CS Pins wired to avoid conflict with the LCD diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index 08d6475c5e5a..58b9b786487e 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -257,15 +257,15 @@ #endif #endif -#ifndef FAN_PIN +#ifndef FAN0_PIN #if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN MOSFET_C_PIN + #define FAN0_PIN MOSFET_C_PIN #elif FET_ORDER_EEB // Hotend, Hotend, Bed - #define FAN_PIN 4 // IO pin. Buffer needed + #define FAN0_PIN 4 // IO pin. Buffer needed #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN MOSFET_B_PIN + #define FAN0_PIN MOSFET_B_PIN #endif #endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h index 4d150946c2a3..8c65b2e0b41d 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_CREALITY.h @@ -33,7 +33,7 @@ // Heaters / Fans // #define MOSFET_B_PIN 7 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FIL_RUNOUT_PIN 2 #if NUM_RUNOUT_SENSORS >= 2 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h index 3ffa940c482d..ece072b50953 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_ENDER_4.h @@ -36,7 +36,7 @@ // band (case light). Thus the hotend and controller fans are always-on. #if ENABLED(CASE_LIGHT_ENABLE) - #undef FAN_PIN + #undef FAN0_PIN #ifndef CASE_LIGHT_PIN #define CASE_LIGHT_PIN MOSFET_B_PIN #endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h index 526045c1558d..663c6e47921b 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_OLD.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_OLD.h @@ -88,14 +88,14 @@ #if ENABLED(RAMPS_V_1_0) #define HEATER_0_PIN 12 #define HEATER_BED_PIN -1 - #ifndef FAN_PIN - #define FAN_PIN 11 + #ifndef FAN0_PIN + #define FAN0_PIN 11 #endif #else // RAMPS_V_1_1 or RAMPS_V_1_2 #define HEATER_0_PIN 10 #define HEATER_BED_PIN 8 - #ifndef FAN_PIN - #define FAN_PIN 9 + #ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h index e74480a0d448..bb1e2764169d 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_S_12.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_S_12.h @@ -172,12 +172,12 @@ #if MB(RAMPS_S_12_EEFB) // Hotend0, Hotend1, Fan, Bed #define HEATER_1_PIN RAMPS_S_HE_1 - #define FAN_PIN RAMPS_S_HE_2 + #define FAN0_PIN RAMPS_S_HE_2 #elif MB(RAMPS_S_12_EEEB) // Hotend0, Hotend1, Hotend2, Bed #define HEATER_1_PIN RAMPS_S_HE_1 #define HEATER_2_PIN RAMPS_S_HE_2 #elif MB(RAMPS_S_12_EFFB) // Hotend, Fan0, Fan1, Bed - #define FAN_PIN RAMPS_S_HE_1 + #define FAN0_PIN RAMPS_S_HE_1 #define FAN1_PIN RAMPS_S_HE_2 #endif diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h index d1824d3813a0..8eab6c7d9b4f 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD.h @@ -84,8 +84,8 @@ #undef HEATER_BED_PIN #define HEATER_BED_PIN 10 -#ifndef FAN_PIN - #define FAN_PIN 8 // Same as RAMPS_13_EEF +#ifndef FAN0_PIN + #define FAN0_PIN 8 // Same as RAMPS_13_EEF #endif // diff --git a/Marlin/src/pins/ramps/pins_RUMBA.h b/Marlin/src/pins/ramps/pins_RUMBA.h index 6b1f4c569170..3c6873e7653b 100644 --- a/Marlin/src/pins/ramps/pins_RUMBA.h +++ b/Marlin/src/pins/ramps/pins_RUMBA.h @@ -159,8 +159,8 @@ #define HEATER_3_PIN 8 #define HEATER_BED_PIN 9 -#ifndef FAN_PIN - #define FAN_PIN 7 +#ifndef FAN0_PIN + #define FAN0_PIN 7 #endif #ifndef FAN1_PIN #define FAN1_PIN 8 diff --git a/Marlin/src/pins/ramps/pins_TANGO.h b/Marlin/src/pins/ramps/pins_TANGO.h index 936751e9ebf7..54dd4433998f 100644 --- a/Marlin/src/pins/ramps/pins_TANGO.h +++ b/Marlin/src/pins/ramps/pins_TANGO.h @@ -30,7 +30,7 @@ #define BOARD_INFO_NAME "Tango" -#define FAN_PIN 8 +#define FAN0_PIN 8 #define FAN1_PIN -1 #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h index dd6fb2fa7036..a00720b576df 100644 --- a/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h +++ b/Marlin/src/pins/ramps/pins_TENLOG_D3_HERO.h @@ -138,7 +138,7 @@ #define HEATER_1_PIN 11 #define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN1_PIN 5 // Normally this would be a servo pin // XXX Runout support unknown? diff --git a/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h b/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h index 780ab8daa49e..0cf6e3b18b3f 100644 --- a/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h +++ b/Marlin/src/pins/ramps/pins_TENLOG_MB1_V23.h @@ -95,7 +95,7 @@ #define HEATER_1_PIN 10 #define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN2_PIN 5 // Normally this would be a servo pin //#define NUM_RUNOUT_SENSORS 0 diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index f9856e04f58c..0e6e8ee41dec 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -46,7 +46,7 @@ // // Heaters / Fans // -#define FAN_PIN 9 // FAN0 +#define FAN0_PIN 9 // FAN0 #define FAN1_PIN 7 // FAN1 #define FAN2_PIN 44 // FAN2 #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index c0247c7b471d..5150ad55b637 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -192,7 +192,7 @@ #define HEATER_2_PIN 44 #define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN0_PIN 9 #if EXTRUDERS >= 5 #define HEATER_4_PIN 6 diff --git a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h index 4ee0a6950d39..16400be05966 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAIN_2.h @@ -112,8 +112,8 @@ #define HEATER_1_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 7 +#ifndef FAN0_PIN + #define FAN0_PIN 7 #endif #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index e3e91428dfa7..c29318c37291 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -99,8 +99,8 @@ #define HEATER_1_PIN 3 #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 7 +#ifndef FAN0_PIN + #define FAN0_PIN 7 #endif // diff --git a/Marlin/src/pins/ramps/pins_VORON.h b/Marlin/src/pins/ramps/pins_VORON.h index f56b0cb8fcfb..c928a1fb654b 100644 --- a/Marlin/src/pins/ramps/pins_VORON.h +++ b/Marlin/src/pins/ramps/pins_VORON.h @@ -36,8 +36,8 @@ // // Heaters / Fans // -#undef FAN_PIN -#define FAN_PIN 5 // Using the pin for the controller fan since controller fan is always on. +#undef FAN0_PIN +#define FAN0_PIN 5 // Using the pin for the controller fan since controller fan is always on. #define CONTROLLER_FAN_PIN 8 // diff --git a/Marlin/src/pins/ramps/pins_ZRIB_V53.h b/Marlin/src/pins/ramps/pins_ZRIB_V53.h index 050516791e40..74188190fe5a 100644 --- a/Marlin/src/pins/ramps/pins_ZRIB_V53.h +++ b/Marlin/src/pins/ramps/pins_ZRIB_V53.h @@ -164,7 +164,7 @@ #define HEATER_0_PIN 10 #define HEATER_1_PIN 7 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define HEATER_BED_PIN 8 #define FAN1_PIN 6 diff --git a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h index 1c67903a2141..e4603591d12a 100644 --- a/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h +++ b/Marlin/src/pins/ramps/pins_Z_BOLT_X_SERIES.h @@ -136,7 +136,7 @@ #define HEATER_3_PIN 5 #define HEATER_BED_PIN 8 -#define FAN_PIN 9 +#define FAN0_PIN 9 // // Misc. Functions diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h index 425d6d45afb3..7e47f122f61d 100644 --- a/Marlin/src/pins/sam/pins_ADSK.h +++ b/Marlin/src/pins/sam/pins_ADSK.h @@ -116,7 +116,7 @@ A stepper for E0 extruder // #define HEATER_0_PIN 55 // "Hold": Analog pin 1, Digital pin 55 #define HEATER_BED_PIN 57 // "CoolEn": Analog pin 3, Digital pin 57 -#define FAN_PIN 54 // "Abort": Analog pin 0, Digital pin 54 +#define FAN0_PIN 54 // "Abort": Analog pin 0, Digital pin 54 #undef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN 56 // "Resume": Analog pin 2, Digital pin 56 diff --git a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h index 76431937a712..bdbea60150d9 100644 --- a/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h +++ b/Marlin/src/pins/sam/pins_ALLIGATOR_R2.h @@ -113,8 +113,8 @@ #define HEATER_3_PIN 97 // PC20 on piggy #define HEATER_BED_PIN 69 // PA0 -#ifndef FAN_PIN - #define FAN_PIN 92 // PA5 +#ifndef FAN0_PIN + #define FAN0_PIN 92 // PA5 #endif #define FAN1_PIN 31 // PA7 diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index d9f1dcbf9427..e01b93a01852 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -153,8 +153,8 @@ #define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 #define HEATER_BED_PIN 9 // D9 PC21 BED_PWM -#ifndef FAN_PIN - #define FAN_PIN 4 // D4 PC26 FET_PWM1 +#ifndef FAN0_PIN + #define FAN0_PIN 4 // D4 PC26 FET_PWM1 #endif #define FAN1_PIN 5 // D5 PC25 FET_PWM2 diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index 503b29f15b9e..de06a72809b7 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -174,8 +174,8 @@ #define HEATER_2_PIN 8 // D8 PC22 FET_PWM5 #define HEATER_BED_PIN 9 // D9 PC21 BED_PWM -#ifndef FAN_PIN - #define FAN_PIN 4 // D4 PC26 FET_PWM1 +#ifndef FAN0_PIN + #define FAN0_PIN 4 // D4 PC26 FET_PWM1 #endif #define FAN1_PIN 5 // D5 PC25 FET_PWM2 diff --git a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h index d44f6490da63..3d15f37e47fa 100644 --- a/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h +++ b/Marlin/src/pins/sam/pins_CNCONTROLS_15D.h @@ -91,7 +91,7 @@ // // Fans // -//#define FAN_PIN 8 +//#define FAN0_PIN 8 // // Auto fans diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index 81eca3e4b14a..5d47f28abae7 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -96,8 +96,8 @@ #define HEATER_1_PIN 8 // HOTEND1 MOSFET #define HEATER_BED_PIN 39 // BED MOSFET -#ifndef FAN_PIN - #define FAN_PIN 11 // FAN1 header on board - PRINT FAN +#ifndef FAN0_PIN + #define FAN0_PIN 11 // FAN1 header on board - PRINT FAN #endif #define FAN1_PIN 9 // FAN2 header on board - CONTROLLER FAN #define FAN2_PIN 12 // FAN3 header on board - EXTRUDER0 FAN diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 7754fa9329f9..9d56d3626457 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -84,8 +84,8 @@ #define HEATER_0_PIN 13 // HOTEND0 MOSFET #define HEATER_BED_PIN 7 // BED MOSFET -#ifndef FAN_PIN - #define FAN_PIN 11 // FAN1 header on board - PRINT FAN +#ifndef FAN0_PIN + #define FAN0_PIN 11 // FAN1 header on board - PRINT FAN #endif #define FAN1_PIN 12 // FAN2 header on board - CONTROLLER FAN #define FAN2_PIN 9 // FAN3 header on board - EXTRUDER0 FAN diff --git a/Marlin/src/pins/sam/pins_KRATOS32.h b/Marlin/src/pins/sam/pins_KRATOS32.h index f7867f9b2607..97449c2d83ae 100644 --- a/Marlin/src/pins/sam/pins_KRATOS32.h +++ b/Marlin/src/pins/sam/pins_KRATOS32.h @@ -126,8 +126,8 @@ #define HEATER_3_PIN 10 #define HEATER_BED_PIN 7 // BED -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #define FAN1_PIN 8 diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index aa01a9227fb3..8fd1843ab59e 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -138,8 +138,8 @@ #define HEATER_0_PIN 40 // PA5 #define HEATER_BED_PIN 41 // PB24 -#ifndef FAN_PIN - #define FAN_PIN 13 // PB27 Fan1A +#ifndef FAN0_PIN + #define FAN0_PIN 13 // PB27 Fan1A #endif #define FAN1_PIN 58 // PA6 Fan1B diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index af24014614c1..e3de44427808 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -196,8 +196,8 @@ #define HEATER_BED_PIN 7 // BED #endif -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #define FAN1_PIN 8 diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index 00eba994a8d9..75d758439c57 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -124,8 +124,8 @@ #define HEATER_2_PIN 11 #define HEATER_BED_PIN 8 -#ifndef FAN_PIN - #define FAN_PIN 12 +#ifndef FAN0_PIN + #define FAN0_PIN 12 #endif // diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index f8ea65a36973..fb14c5a81fbe 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -122,8 +122,8 @@ #define HEATER_2_PIN 11 #define HEATER_BED_PIN 7 // BED H1 -#ifndef FAN_PIN - #define FAN_PIN 9 +#ifndef FAN0_PIN + #define FAN0_PIN 9 #endif #define FAN1_PIN 8 #define CONTROLLER_FAN_PIN -1 diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 58cb3f7a75e9..c65e6e24cb3b 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -114,7 +114,7 @@ #define HEATER_2_PIN 11 #define HEATER_BED_PIN 7 // BED H1 -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN1_PIN 8 #define CONTROLLER_FAN_PIN -1 diff --git a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h index fd30c2b69a86..4445cf24e886 100644 --- a/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h +++ b/Marlin/src/pins/sam/pins_ULTRATRONICS_PRO.h @@ -120,8 +120,8 @@ #define HEATER_3_PIN 9 #define HEATER_BED_PIN 2 -#ifndef FAN_PIN - #define FAN_PIN 6 +#ifndef FAN0_PIN + #define FAN0_PIN 6 #endif #define FAN2_PIN 5 diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h index 2a84d964ea6d..5cd258410421 100644 --- a/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h +++ b/Marlin/src/pins/samd/pins_BRICOLEMON_LITE_V1_0.h @@ -102,7 +102,7 @@ // #define HEATER_0_PIN 6 #define HEATER_BED_PIN 7 -#define FAN_PIN 8 +#define FAN0_PIN 8 #define FAN1_PIN 9 // diff --git a/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h b/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h index 2343dbcf8217..13434fffeb52 100644 --- a/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h +++ b/Marlin/src/pins/samd/pins_BRICOLEMON_V1_0.h @@ -152,7 +152,7 @@ #define HEATER_BED_PIN 7 // The board has 4 PWM fans, use and configure as desired -#define FAN_PIN 8 +#define FAN0_PIN 8 #define FAN1_PIN 9 #define FAN2_PIN 30 #define FAN3_PIN 31 diff --git a/Marlin/src/pins/samd/pins_MINITRONICS20.h b/Marlin/src/pins/samd/pins_MINITRONICS20.h index da1919cd2bf5..12438fe57e9e 100644 --- a/Marlin/src/pins/samd/pins_MINITRONICS20.h +++ b/Marlin/src/pins/samd/pins_MINITRONICS20.h @@ -149,7 +149,7 @@ #define SPINDLE_LASER_PWM_PIN 6 // The board has 4 PWM fans, use and configure as desired -#define FAN_PIN 24 +#define FAN0_PIN 24 // // LCD / Controller diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index e5091e5cdc15..ed10c4d284de 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -123,7 +123,7 @@ #else #define HEATER_1_PIN 8 #endif -#define FAN_PIN 9 +#define FAN0_PIN 9 #define FAN1_PIN 7 #define FAN2_PIN 12 diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index f6816bfb953c..176bb2be12c4 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -148,8 +148,8 @@ #define HEATER_0_PIN 13 // (extruder) #define HEATER_BED_PIN 12 // (bed) -#ifndef FAN_PIN - #define FAN_PIN 4 +#ifndef FAN0_PIN + #define FAN0_PIN 4 #endif // diff --git a/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h b/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h index 76d53c6021db..5767bc993b66 100644 --- a/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h +++ b/Marlin/src/pins/sanguino/pins_AZTEEG_X1.h @@ -29,6 +29,6 @@ #define BOARD_INFO_NAME "Azteeg X1" -#define FAN_PIN 4 +#define FAN0_PIN 4 #include "pins_SANGUINOLOLU_12.h" // ... SANGUINOLOLU_11 diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h index ade59fd80794..0bf65c37cd38 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_12.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h @@ -117,8 +117,8 @@ #define HEATER_0_PIN 4 #define HEATER_BED_PIN 3 -#if !defined(FAN_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin - #define FAN_PIN 31 +#if !defined(FAN0_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin + #define FAN0_PIN 31 #endif // diff --git a/Marlin/src/pins/sanguino/pins_MELZI.h b/Marlin/src/pins/sanguino/pins_MELZI.h index be1b7934c81f..a0c7050a9111 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI.h +++ b/Marlin/src/pins/sanguino/pins_MELZI.h @@ -33,8 +33,8 @@ #define IS_MELZI 1 -#ifndef FAN_PIN - #define FAN_PIN 4 +#ifndef FAN0_PIN + #define FAN0_PIN 4 #endif // Alter timing for graphical display diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h index a61692c9f1fa..7984e64b5f56 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h @@ -99,7 +99,7 @@ PIN: 2 Port: B2 Z_DIR_PIN protected PIN: 3 Port: B3 Z_STEP_PIN protected PIN: 4 Port: B4 AVR_SS_PIN protected - . FAN_PIN protected + . FAN0_PIN protected . SD_SS_PIN protected PIN: 5 Port: B5 AVR_MOSI_PIN Output = 1 . SD_MOSI_PIN Output = 1 diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index 7f18283d1c54..65f9006adbf5 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -128,8 +128,8 @@ #define HEATER_0_PIN 3 // DONE PWM on RIGHT connector #define HEATER_BED_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 14 // PWM on MIDDLE connector +#ifndef FAN0_PIN + #define FAN0_PIN 14 // PWM on MIDDLE connector #endif // diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h index a3ceb76a0de9..aa7f79d602d7 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA_A.h +++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h @@ -123,8 +123,8 @@ // #define HEATER_0_PIN 4 -#ifndef FAN_PIN - #define FAN_PIN 3 +#ifndef FAN0_PIN + #define FAN0_PIN 3 #endif // diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index a8475fb3263a..1459eab6463b 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -100,8 +100,8 @@ // #define HEATER_0_PIN 13 // (extruder) -#ifndef FAN_PIN - #define FAN_PIN 4 // Works for Panelolu2 too +#ifndef FAN0_PIN + #define FAN0_PIN 4 // Works for Panelolu2 too #endif #if DISABLED(SANGUINOLOLU_V_1_2) diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h index 220956926143..37d1e7030b42 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_12.h @@ -52,8 +52,8 @@ #endif #define E0_ENABLE_PIN 14 -#if !defined(FAN_PIN) && ENABLED(LCD_I2C_PANELOLU2) - #define FAN_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan +#if !defined(FAN0_PIN) && ENABLED(LCD_I2C_PANELOLU2) + #define FAN0_PIN 4 // Uses Transistor1 (PWM) on Panelolu2's Sanguino Adapter Board to drive the fan #endif #define SANGUINOLOLU_V_1_2 diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h index a2240b385b2b..31d5585cc8cf 100644 --- a/Marlin/src/pins/sanguino/pins_SETHI.h +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -97,13 +97,8 @@ #define HEATER_0_PIN 4 #define HEATER_BED_PIN 3 -#ifndef FAN_PIN - #if GEN7_VERSION >= 13 - // Gen7 v1.3 removed the fan pin - #define FAN_PIN -1 - #else - #define FAN_PIN 31 - #endif +#if !defined(FAN0_PIN) && GEN7_VERSION < 13 // Gen7 v1.3 removed the fan pin + #define FAN0_PIN 31 #endif // diff --git a/Marlin/src/pins/sanguino/pins_STB_11.h b/Marlin/src/pins/sanguino/pins_STB_11.h index 1bda25b3d4f7..5c6c5d4f826c 100644 --- a/Marlin/src/pins/sanguino/pins_STB_11.h +++ b/Marlin/src/pins/sanguino/pins_STB_11.h @@ -28,8 +28,8 @@ #define BOARD_INFO_NAME "STB V1.1" -#ifndef FAN_PIN - #define FAN_PIN 4 // Works for Panelolu2 too +#ifndef FAN0_PIN + #define FAN0_PIN 4 // Works for Panelolu2 too #endif #include "pins_SANGUINOLOLU_12.h" // ... SANGUINOLOLU_11 diff --git a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h index bd9230c32a82..5b0b996d18f2 100644 --- a/Marlin/src/pins/sanguino/pins_ZMIB_V2.h +++ b/Marlin/src/pins/sanguino/pins_ZMIB_V2.h @@ -79,7 +79,7 @@ * PIN: 25 Port: A6 FIL_RUNOUT_PIN * PIN: 26 Port: A5 E0_DIR_PIN * PIN: 27 Port: A4 E0_STEP_PIN - * PIN: 28 Port: A3 FAN_PIN + * PIN: 28 Port: A3 FAN0_PIN * PIN: 29 Port: A2 EXP1_3(BTN_ENC) * ADC_KEY_PIN * PIN: 30 Port: A1 TEMP_0_PIN @@ -144,7 +144,7 @@ // #define HEATER_0_PIN 0 #define HEATER_BED_PIN 1 -#define FAN_PIN 28 +#define FAN0_PIN 28 #define FAN1_PIN -1 // diff --git a/Marlin/src/pins/sensitive_pins.h b/Marlin/src/pins/sensitive_pins.h index 288bcc904ead..abccac9dad9d 100644 --- a/Marlin/src/pins/sensitive_pins.h +++ b/Marlin/src/pins/sensitive_pins.h @@ -899,8 +899,8 @@ #define _Z_PROBE #endif -#if PIN_EXISTS(FAN) - #define _FAN0 FAN_PIN, +#if PIN_EXISTS(FAN0) + #define _FAN0 FAN0_PIN, #else #define _FAN0 #endif diff --git a/Marlin/src/pins/stm32f1/pins_BEAST.h b/Marlin/src/pins/stm32f1/pins_BEAST.h index 4dafe2f27365..80967bad074c 100644 --- a/Marlin/src/pins/stm32f1/pins_BEAST.h +++ b/Marlin/src/pins/stm32f1/pins_BEAST.h @@ -89,8 +89,8 @@ #define HEATER_BED_PIN PB9 // BED -#ifndef FAN_PIN - #define FAN_PIN PB10 +#ifndef FAN0_PIN + #define FAN0_PIN PB10 #endif #define FAN_SOFT_PWM_REQUIRED diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h index e3e91ff35ad4..00dc0613f27f 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h @@ -112,7 +112,7 @@ #define HEATER_0_PIN PC8 // HEATER1 #define HEATER_BED_PIN PC9 // HOT BED -#define FAN_PIN PC6 // FAN +#define FAN0_PIN PC6 // FAN #define FAN_SOFT_PWM_REQUIRED #define CONTROLLER_FAN_PIN PC7 diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index 5007de25dade..8fb194c27f06 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -145,7 +145,7 @@ // #define HEATER_0_PIN PC8 // "HE" #define HEATER_BED_PIN PC9 // "HB" -#define FAN_PIN PA8 // "FAN0" +#define FAN0_PIN PA8 // "FAN0" // // USB connect control diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h index c0428279f0fe..7e6798deafd6 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_V2_0.h @@ -37,7 +37,7 @@ #undef NO_EEPROM_SELECTED #endif -#define FAN_PIN PC6 +#define FAN0_PIN PC6 // // USB connect control diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h index 5770f4a5ba01..9d85e211f763 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h @@ -100,8 +100,8 @@ #define HEATER_0_PIN PC8 // "HE" #define HEATER_BED_PIN PC9 // "HB" -#ifndef FAN_PIN - #define FAN_PIN PA8 // "FAN0" +#ifndef FAN0_PIN + #define FAN0_PIN PA8 // "FAN0" #endif // diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index 9c5836dc741f..c45e7fb282d3 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -100,7 +100,7 @@ // Heaters / Fans // #define HEATER_0_PIN PA8 -#define FAN_PIN PC8 +#define FAN0_PIN PC8 #define HEATER_BED_PIN PC9 // diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h index ec4535982ec9..a75825658c9b 100644 --- a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h +++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h @@ -114,7 +114,7 @@ #define HEATER_0_PIN PC8 // HEATER0 #define HEATER_BED_PIN PC9 // HOT BED -#define FAN_PIN PA7 // FAN (fan2 on board) model cool fan +#define FAN0_PIN PA7 // FAN (fan2 on board) model cool fan #define FAN1_PIN PA8 // FAN (fan0 on board) e0 cool fan #define FAN2_PIN PB9 // FAN (fan1 on board) controller cool fan diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 3b66096a270d..32894bb72c97 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -83,8 +83,8 @@ #define HEATER_0_PIN PD12 // HOT-END #define HEATER_BED_PIN PG11 // HOT-BED -#ifndef FAN_PIN - #define FAN_PIN PG14 // MAIN BOARD FAN +#ifndef FAN0_PIN + #define FAN0_PIN PG14 // MAIN BOARD FAN #endif #define FAN_SOFT_PWM_REQUIRED diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h index f5dd4a42b0f6..9f8de25ff1ab 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h @@ -99,7 +99,7 @@ // Fans // #define CONTROLLER_FAN_PIN PD6 // BOARD FAN -#define FAN_PIN PG13 // FAN +#define FAN0_PIN PG13 // FAN #define FAN2_PIN PG14 // diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h index 53953f9ebccc..7a8f3189aad8 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V24S1_301.h @@ -84,7 +84,7 @@ #if HAS_CUTTER //#define HEATER_0_PIN -1 //#define HEATER_BED_PIN -1 - #define FAN_PIN -1 + #define FAN0_PIN -1 #define SPINDLE_LASER_ENA_PIN PC0 // FET 1 #define SPINDLE_LASER_PWM_PIN PC0 // Bed FET #define SPINDLE_DIR_PIN PC0 // FET 4 diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h index b6316c01c66a..9e422e62b0a3 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V25S1.h @@ -114,7 +114,7 @@ #define HEATER_0_PIN PB14 // HEATER1 #define HEATER_BED_PIN PB13 // HOT BED -#define FAN_PIN PB15 // FAN +#define FAN0_PIN PB15 // FAN #ifndef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN PC13 // FAN #endif diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h index 7c4df3520ce3..e71fec0181f5 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4.h @@ -149,8 +149,8 @@ #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PA2 // HOT BED #endif -#ifndef FAN_PIN - #define FAN_PIN PA0 // FAN +#ifndef FAN0_PIN + #define FAN0_PIN PA0 // FAN #endif #define FAN_SOFT_PWM_REQUIRED diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h index f3b7e4f308b9..d85758981f3a 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V4210.h @@ -130,7 +130,7 @@ #define HEATER_0_PIN PA0 // HEATER1 #define HEATER_BED_PIN PA1 // HOT BED -#define FAN_PIN PA2 // FAN +#define FAN0_PIN PA2 // FAN #define FAN_SOFT_PWM_REQUIRED // diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h index 1c62d19a99e4..2d9b9f38f54f 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V425.h @@ -72,6 +72,6 @@ // #define HEATER_0_PIN PA0 // HEATER1 #define HEATER_BED_PIN PA1 // HOT BED -#define FAN_PIN PA2 // FAN +#define FAN0_PIN PA2 // FAN #include "pins_CREALITY_V4.h" diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h index 4f57f8a805df..2f89402607cd 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V452.h @@ -33,7 +33,7 @@ #define HEATER_0_PIN PA1 // HEATER1 #define HEATER_BED_PIN PA2 // HOT BED -#define FAN_PIN PA0 // FAN +#define FAN0_PIN PA0 // FAN #if ENABLED(PROBE_ACTIVATION_SWITCH) #ifndef PROBE_ACTIVATION_SWITCH_PIN diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h index 6a0fa4f41802..25b5d6c0acc7 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V453.h @@ -33,7 +33,7 @@ #define HEATER_0_PIN PB14 // HEATER1 #define HEATER_BED_PIN PB13 // HOT BED -#define FAN_PIN PB15 // FAN +#define FAN0_PIN PB15 // FAN #if ENABLED(PROBE_ACTIVATION_SWITCH) #ifndef PROBE_ACTIVATION_SWITCH_PIN diff --git a/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h b/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h index d3d3685531dc..c90d76d17d9e 100644 --- a/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h +++ b/Marlin/src/pins/stm32f1/pins_CREALITY_V521.h @@ -133,7 +133,7 @@ #define HEATER_1_PIN PA0 // HEATER1 #define HEATER_BED_PIN PA2 // HOT BED -#define FAN_PIN PB14 // FAN +#define FAN0_PIN PB14 // FAN #define FAN1_PIN PB12 // FAN #define FAN_SOFT_PWM diff --git a/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h b/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h index 08c9500fc5e1..f5a285170e99 100644 --- a/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_ERYONE_ERY32_MINI.h @@ -105,15 +105,15 @@ #endif #endif -#ifndef FAN_PIN +#ifndef FAN0_PIN #if EITHER(FET_ORDER_EFB, FET_ORDER_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan - #define FAN_PIN PB5 + #define FAN0_PIN PB5 #elif EITHER(FET_ORDER_EEF, FET_ORDER_SF) // Hotend, Hotend, Fan or Spindle, Fan - #define FAN_PIN PD12 + #define FAN0_PIN PD12 #elif ENABLED(FET_ORDER_EEB) // Hotend, Hotend, Bed - #define FAN_PIN -1 // IO pin. Buffer needed + #define FAN0_PIN -1 // IO pin. Buffer needed #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN PB5 + #define FAN0_PIN PB5 #endif #endif diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h index ff588f948812..f784c07c21c4 100644 --- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h +++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h @@ -189,7 +189,7 @@ #define HEATER_0_PIN PC3 // HEATER_E0 #define HEATER_BED_PIN PA0 // HEATER_BED-WKUP -#define FAN_PIN PB1 // E_FAN +#define FAN0_PIN PB1 // E_FAN // // Misc. Functions diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h index c139b4943ce4..c7a6a7639db0 100644 --- a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h @@ -109,8 +109,8 @@ // #define HEATER_0_PIN PC6 #define HEATER_BED_PIN PC7 -#ifndef FAN_PIN - #define FAN_PIN PC8 +#ifndef FAN0_PIN + #define FAN0_PIN PC8 #endif #define FAN1_PIN PC9 diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index 9250ee112762..1c62c461f964 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -134,8 +134,8 @@ // #define HEATER_0_PIN PC7 #define HEATER_BED_PIN PC6 -#ifndef FAN_PIN - #define FAN_PIN PC8 +#ifndef FAN0_PIN + #define FAN0_PIN PC8 #endif // diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index e59e8aef595f..9bc10a26bc16 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -104,8 +104,8 @@ // #define HEATER_0_PIN PC6 #define HEATER_BED_PIN PC7 -#ifndef FAN_PIN - #define FAN_PIN PC8 +#ifndef FAN0_PIN + #define FAN0_PIN PC8 #endif // diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index 5515132c7844..4030edbeb2f9 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -110,7 +110,7 @@ // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port +//#define FAN0_PIN PB9 // EXT0 port #define FAN1_PIN PB8 // EXT1 port #define FAN2_PIN PB7 // EXT2 port diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index dc23680b8c20..040f44e0cfd7 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -110,7 +110,7 @@ // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port +//#define FAN0_PIN PB9 // EXT0 port #define FAN1_PIN PB8 // EXT1 port #define FAN2_PIN PB7 // EXT2 port diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index 646638dae2f5..313b693ec549 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -115,7 +115,7 @@ // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port +//#define FAN0_PIN PB9 // EXT0 port #define FAN1_PIN PB8 // EXT1 port #define FAN2_PIN PB7 // EXT2 port diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index 968d9cb6bd58..35b952f79ba3 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -110,7 +110,7 @@ // // These are FAN PWM pins on EXT0..EXT2 connectors. // -//#define FAN_PIN PB9 // EXT0 port +//#define FAN0_PIN PB9 // EXT0 port #define FAN1_PIN PB8 // EXT1 port #define FAN2_PIN PB7 // EXT2 port diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index d3cf3e5cf52c..c4638cd9a975 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -104,7 +104,7 @@ #define HEATER_0_PIN PA2 #define HEATER_BED_PIN PA3 -#define FAN_PIN PA1 +#define FAN0_PIN PA1 #define FIL_RUNOUT_PIN PC7 diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index ad6b84b05769..bd39632cc52c 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -88,7 +88,7 @@ #define HEATER_0_PIN PD3 // pin 84 (Nozzle Heat Mosfet) #define HEATER_BED_PIN PA8 // pin 67 (Hot Bed Mosfet) -#define FAN_PIN PA15 // pin 77 (4cm Fan) +#define FAN0_PIN PA15 // pin 77 (4cm Fan) #if TERN(MAPLE_STM32F1, ENABLED(FAN_SOFT_PWM), ENABLED(FAST_PWM_FAN)) && FAN_MIN_PWM < 5 // Required to avoid issues with heating or STLink #error "FAN_MIN_PWM must be 5 or higher." // Fan will not start in 1-30 range @@ -116,7 +116,7 @@ #define BOARD_PREINIT() { \ OUT_WRITE_OD(HEATER_0_PIN, 0); \ OUT_WRITE_OD(HEATER_BED_PIN, 0); \ - OUT_WRITE_OD(FAN_PIN, 0); \ + OUT_WRITE_OD(FAN0_PIN, 0); \ } // diff --git a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h index 9ed3c1156005..c4d027657890 100644 --- a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h @@ -111,7 +111,7 @@ #define HEATER_0_PIN PB0 #define HEATER_BED_PIN PB1 -#define FAN_PIN PA0 // FAN +#define FAN0_PIN PA0 // FAN // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index be5f6c740482..25b372a889f9 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -116,7 +116,7 @@ // // Fan // -#define FAN_PIN PA7 // FAN +#define FAN0_PIN PA7 // FAN // // Thermocouples diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 7994089619f8..b14b17d0b962 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -171,7 +171,7 @@ #define HEATER_0_PIN PC3 // HEATER1 #define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PB1 // FAN +#define FAN0_PIN PB1 // FAN // // Misc. Functions diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index 74780562b6c0..c7aacc4bab33 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -119,7 +119,7 @@ // Heaters 0,1 / Fans / Bed // #define HEATER_0_PIN PC9 -#define FAN_PIN PA8 +#define FAN0_PIN PA8 #define HEATER_BED_PIN PC8 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index 7ead6aa28820..e2d4cf564645 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -68,7 +68,7 @@ // Heaters / Fans // #define HEATER_0_PIN PC9 -#define FAN_PIN PA8 +#define FAN0_PIN PA8 #define HEATER_BED_PIN PC8 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index b1aaa53c9487..161ff658a609 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -82,7 +82,7 @@ // #define HEATER_0_PIN PC9 #define HEATER_1_PIN PC7 -#define FAN_PIN PA8 +#define FAN0_PIN PA8 #define HEATER_BED_PIN PC8 // diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h index cd4989d73d49..11597109c8c8 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_MINI.h @@ -111,7 +111,7 @@ #define HEATER_0_PIN PC3 #define HEATER_BED_PIN PA0 -#define FAN_PIN PB1 // FAN +#define FAN0_PIN PB1 // FAN // // Misc. Functions diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index bfa6f451202b..9176ec0ae1cb 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -180,7 +180,7 @@ #define HEATER_1_PIN PB0 // HEATER2 #define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PB1 // FAN +#define FAN0_PIN PB1 // FAN // // Thermocouples diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h index c804c0ce1785..c37b5da5a037 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_common.h @@ -124,8 +124,8 @@ #define HEATER_1_PIN PB0 #endif #endif -#ifndef FAN_PIN - #define FAN_PIN PB1 // FAN +#ifndef FAN0_PIN + #define FAN0_PIN PB1 // FAN0 #endif #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PA0 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 7373d0d7b5bb..63b7b9e28682 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -165,7 +165,7 @@ #define HEATER_1_PIN PB0 // +HE1- #define HEATER_2_PIN PF9 // +HE2- #define HEATER_BED_PIN PA0 // +HOT-BED- -#define FAN_PIN PB1 // +FAN- +#define FAN0_PIN PB1 // +FAN- /** * Note: MKS Robin Pro board is using SPI2 interface. Make sure your stm32duino library is configured accordingly diff --git a/Marlin/src/pins/stm32f1/pins_MORPHEUS.h b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h index 87919c12f488..08e5455b3098 100644 --- a/Marlin/src/pins/stm32f1/pins_MORPHEUS.h +++ b/Marlin/src/pins/stm32f1/pins_MORPHEUS.h @@ -82,7 +82,7 @@ #define HEATER_0_PIN PA2 // HOTEND MOSFET #define HEATER_BED_PIN PA0 // BED MOSFET -#define FAN_PIN PA1 // FAN1 header on board - PRINT FAN +#define FAN0_PIN PA1 // FAN1 header on board - PRINT FAN // // Misc. diff --git a/Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h b/Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h index 56200d50968b..7c8906e59943 100644 --- a/Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h +++ b/Marlin/src/pins/stm32f1/pins_PANDA_PI_V29.h @@ -140,7 +140,7 @@ // #define HEATER_0_PIN PB12 // "HE" #define HEATER_BED_PIN PB13 // "HB" -#define FAN_PIN PA8 // "FAN0" +#define FAN0_PIN PA8 // "FAN0" #define HEATER_1_PIN PA12 // diff --git a/Marlin/src/pins/stm32f1/pins_SOVOL_V131.h b/Marlin/src/pins/stm32f1/pins_SOVOL_V131.h index 67b2944f4560..ba8a563f39c0 100644 --- a/Marlin/src/pins/stm32f1/pins_SOVOL_V131.h +++ b/Marlin/src/pins/stm32f1/pins_SOVOL_V131.h @@ -175,8 +175,8 @@ #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PA2 // HOT BED #endif -#ifndef FAN_PIN - #define FAN_PIN PA0 // FAN +#ifndef FAN0_PIN + #define FAN0_PIN PA0 // FAN #endif #define FAN_SOFT_PWM_REQUIRED diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index eee7dbf31669..61cb563575be 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -86,8 +86,8 @@ //#define HEATER_BED2_PIN -1 // BED2 //#define HEATER_BED3_PIN -1 // BED3 -#ifndef FAN_PIN - #define FAN_PIN PD14 +#ifndef FAN0_PIN + #define FAN0_PIN PD14 #endif #define FAN1_PIN PD13 diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h index 73f61c1aca70..410e39bccf02 100644 --- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -117,7 +117,7 @@ // Fans // #define CONTROLLER_FAN_PIN PD6 // FAN -#define FAN_PIN PG13 // FAN +#define FAN0_PIN PG13 // FAN #define FAN1_PIN PG14 // FAN // diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h index 1347a1467882..fe4fa49f8f40 100644 --- a/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h +++ b/Marlin/src/pins/stm32f1/pins_ZM3E2_V1_0.h @@ -39,7 +39,7 @@ // Zonestar ZM3E2 V1.0 (STM32F103RCT6) board pin assignments //============================================================================= // PA0 PWR_HOLD | PB0 BEEP | PC0 HEATER_0 -// PA1 FAN_PIN | PB1 KILL | PC1 HEATER_BED +// PA1 FAN0_PIN | PB1 KILL | PC1 HEATER_BED // PA2 TX2 | PB2 LCD_SDA | PC2 TEMP_BED // PA3 RX2 | PB3 E1_EN | PC3 TEMP_E0 // PA4 SD_CS | PB4 Z_STOP | PC4 SD_DETECT @@ -149,7 +149,7 @@ #define HEATER_BED_PIN PC1 // BED #define FAN1_PIN PC6 -#define FAN_PIN PA1 +#define FAN0_PIN PA1 // // Temperature Sensors diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h index 9618b3ad1abb..c6192191e172 100644 --- a/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h +++ b/Marlin/src/pins/stm32f1/pins_ZM3E4_V1_0.h @@ -249,7 +249,7 @@ #define HEATER_1_PIN PB0 // HEATER1 #endif -#define FAN_PIN PB1 // FAN1 +#define FAN0_PIN PB1 // FAN1 #define FAN1_PIN PB8 // FAN2 // diff --git a/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h b/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h index d1d8a4c68fcf..b8d72061df1d 100644 --- a/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h +++ b/Marlin/src/pins/stm32f1/pins_ZM3E4_V2_0.h @@ -249,7 +249,7 @@ // // Fans // -#define FAN_PIN PB1 // FAN1 +#define FAN0_PIN PB1 // FAN1 #define FAN1_PIN PB8 // FAN2 // diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h index 7c6eaca812d9..347ef8451dcf 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h @@ -123,7 +123,7 @@ // // Fans // -#define FAN_PIN PE3 // Layer fan +#define FAN0_PIN PE3 // Layer fan #define FAN1_PIN PE1 // Hotend fan #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/stm32f4/pins_ARMED.h b/Marlin/src/pins/stm32f4/pins_ARMED.h index 2abcc21da5a4..6ae2674488eb 100644 --- a/Marlin/src/pins/stm32f4/pins_ARMED.h +++ b/Marlin/src/pins/stm32f4/pins_ARMED.h @@ -128,7 +128,7 @@ #define HEATER_1_PIN PA2 // Hardware PWM #define HEATER_BED_PIN PA0 // Hardware PWM -#define FAN_PIN PC6 // Hardware PWM, Part cooling fan +#define FAN0_PIN PC6 // Hardware PWM, Part cooling fan #define FAN1_PIN PC7 // Hardware PWM, Extruder fan #define FAN2_PIN PC8 // Hardware PWM, Controller fan diff --git a/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h b/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h index 7413b9b0645a..4c0b7d54b717 100644 --- a/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h +++ b/Marlin/src/pins/stm32f4/pins_ARTILLERY_RUBY.h @@ -100,8 +100,8 @@ #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PA8 // Hotbed #endif -#ifndef FAN_PIN - #define FAN_PIN PC8 // Fan0 +#ifndef FAN0_PIN + #define FAN0_PIN PC8 // Fan0 #endif #ifndef FAN1_PIN #define FAN1_PIN PC7 // Fan1 diff --git a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h index c49abca9ef85..b42bcf5de3c4 100644 --- a/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h +++ b/Marlin/src/pins/stm32f4/pins_BLACK_STM32F407VE.h @@ -101,7 +101,7 @@ #define HEATER_1_PIN PA3 // Heater1 #define HEATER_BED_PIN PA1 // Hotbed -#define FAN_PIN PE9 // Fan0 +#define FAN0_PIN PE9 // Fan0 #define FAN1_PIN PE11 // Fan1 #define FAN2_PIN PE13 // Fan2 #define FAN3_PIN PE14 // Fan3 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index d31885e73d62..fdd56b5c9ea3 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -170,11 +170,11 @@ #define HEATER_0_PIN PE6 // Heater0 #define HEATER_BED_PIN PE5 // Hotbed -#ifndef FAN_PIN +#ifndef FAN0_PIN #ifdef MK3_FAN_PINS - #define FAN_PIN PB8 // Fan1 + #define FAN0_PIN PB8 // Fan1 #else - #define FAN_PIN PB9 // Fan0 + #define FAN0_PIN PB9 // Fan0 #endif #endif diff --git a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h index c29949e814c3..383f15f2a3ec 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_E3_RRF.h @@ -159,7 +159,7 @@ #define HEATER_1_PIN FPC16_PIN // "HE1" #endif -#define FAN_PIN PB5 // "FAN0" +#define FAN0_PIN PB5 // "FAN0" #ifndef CONTROLLER_FAN_PIN #define CONTROLLER_FAN_PIN PB6 // "FAN1" diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index fe0e1e52f3f4..a21eaefee829 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -323,7 +323,7 @@ #define HEATER_BED_PIN PA2 // Hotbed -#define FAN_PIN PE5 // Fan0 +#define FAN0_PIN PE5 // Fan0 #define FAN1_PIN PE6 // Fan1 #define FAN2_PIN PC8 // Fan2 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h b/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h index a3bffbce0128..4bc75089d14c 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h @@ -241,7 +241,7 @@ #define HEATER_2_PIN PB10 // Heater2 #define HEATER_3_PIN PB11 // Heater3 -#define FAN_PIN PA8 // Fan0 +#define FAN0_PIN PA8 // Fan0 #define FAN1_PIN PE5 // Fan1 #define FAN2_PIN PD12 // Fan2 #define FAN3_PIN PD13 // Fan3 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h index 31551f6ff6f4..d3a04b9d0715 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_MINI_E3_V3_0_1.h @@ -146,7 +146,7 @@ // #define HEATER_0_PIN PA15 // "HE" #define HEATER_BED_PIN PB3 // "HB" -#define FAN_PIN PC9 // "FAN0" +#define FAN0_PIN PC9 // "FAN0" #define FAN1_PIN PA8 // "FAN1" #define FAN2_PIN PC8 // "FAN2" diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index c535edfc1e00..2121b078db2e 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -289,7 +289,7 @@ // // Fans // -#define FAN_PIN PC8 // Fan0 +#define FAN0_PIN PC8 // Fan0 #define FAN1_PIN PE5 // Fan1 #ifndef E0_AUTO_FAN_PIN diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h index 76d06380b454..ef85caa17094 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h @@ -251,8 +251,8 @@ #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PD7 // Hotbed #endif -#ifndef FAN_PIN - #define FAN_PIN PB7 // Fan0 +#ifndef FAN0_PIN + #define FAN0_PIN PB7 // Fan0 #endif #if HAS_CUTTER diff --git a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h index 8d31130d89cb..24419cfd1bd2 100644 --- a/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h +++ b/Marlin/src/pins/stm32f4/pins_FLYF407ZG.h @@ -166,8 +166,8 @@ #define HEATER_5_PIN PE3 #define HEATER_BED_PIN PE2 -#ifndef FAN_PIN - #define FAN_PIN PF8 +#ifndef FAN0_PIN + #define FAN0_PIN PF8 #endif #define FAN1_PIN PF9 #define FAN2_PIN PA2 diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h index e650f2840e5e..a7b7c079c3f7 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_CHEETAH_V20.h @@ -112,8 +112,8 @@ // #define HEATER_0_PIN PC6 #define HEATER_BED_PIN PC7 -#ifndef FAN_PIN - #define FAN_PIN PA14 +#ifndef FAN0_PIN + #define FAN0_PIN PA14 #endif #define FAN1_PIN PA13 #define FAN2_PIN PA1 diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index fca181c1f46a..49aab671c598 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -182,8 +182,8 @@ #define HEATER_BED_PIN PC8 #endif -#ifndef FAN_PIN - #define FAN_PIN PB0 +#ifndef FAN0_PIN + #define FAN0_PIN PB0 #endif #ifndef FAN1_PIN #define FAN1_PIN PB1 diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_V2_2.h b/Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_V2_2.h index 50a19fa3d3c3..6ef86117e7f7 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_V2_2.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_SPIDER_V2_2.h @@ -28,7 +28,7 @@ #define TEMP_4_PIN PB1 #define TEMP_BED_PIN PB0 -#define FAN_PIN PA13 +#define FAN0_PIN PA13 #define FAN1_PIN PA14 #include "pins_FYSETC_SPIDER.h" diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index 0ea7255c1751..547161367906 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -182,8 +182,8 @@ #define HEATER_1_PIN PA0 #define HEATER_BED_PIN PA2 -#ifndef FAN_PIN - #define FAN_PIN PF7 +#ifndef FAN0_PIN + #define FAN0_PIN PF7 #endif #define FAN1_PIN PF6 diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h index 376c2f3f2734..180235019ad2 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_S.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_S.h @@ -122,7 +122,7 @@ #define HEATER_1_PIN PA1 #define HEATER_BED_PIN PA3 -#define FAN_PIN PA15 // heater 0 fan 1 +#define FAN0_PIN PA15 // heater 0 fan 1 #define FAN1_PIN PB10 // heater 1 fan 2 #define FAN2_PIN PF5 // heater 0 fan 2 and heater 1 fan 1 (two sockets, switched together) diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h index 6325697655ee..20985f263cd0 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_X.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_X.h @@ -98,8 +98,8 @@ #define HEATER_1_PIN -1 #define HEATER_BED_PIN PA2 -//#ifndef FAN_PIN -// #define FAN_PIN PC15 +//#ifndef FAN0_PIN +// #define FAN0_PIN PC15 //#endif #define FAN1_PIN PC15 #define FAN2_PIN PA0 diff --git a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h index c8a5b428dc11..1a7272222119 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_MONSTER8_common.h @@ -194,7 +194,7 @@ #define HEATER_2_PIN PA3 // HE2 #define HEATER_BED_PIN PB10 // H-BED -#define FAN_PIN PA2 // FAN0 +#define FAN0_PIN PA2 // FAN0 #define FAN1_PIN PA1 // FAN1 #define FAN2_PIN PA0 // FAN2 diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h index 2274d0c0dff3..15314c9ca65d 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN2.h @@ -90,7 +90,7 @@ #define HEATER_0_PIN PF3 // Heater0 #define HEATER_1_PIN PF2 // Heater1 #define HEATER_BED_PIN PF4 // Hotbed -#define FAN_PIN PA7 // Fan0 +#define FAN0_PIN PA7 // Fan0 // // Misc. Functions diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h index 42b252d320e7..a687cb9c9da5 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3_common.h @@ -133,7 +133,7 @@ #define HEATER_1_PIN PB0 // HEATER2 #define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PC14 // FAN +#define FAN0_PIN PC14 // FAN #define FAN1_PIN PB1 // FAN1 // diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h index daafe8dee4ee..8fdb41780574 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_PRO_V2.h @@ -177,7 +177,7 @@ #define HEATER_1_PIN PB0 // HEATER2 #define HEATER_BED_PIN PA0 // HOT BED -#define FAN_PIN PB1 // FAN +#define FAN0_PIN PB1 // FAN // // Thermocouples diff --git a/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h b/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h index ac0b7679c3cb..b03fc5419e01 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_SKIPR_V1_0.h @@ -186,7 +186,7 @@ #define HEATER_1_PIN PB0 // Heater1 #define HEATER_2_PIN PA3 // Heater2 -#define FAN_PIN PA2 // Fan0 +#define FAN0_PIN PA2 // Fan0 #define FAN1_PIN PA1 // Fan1 #define FAN2_PIN PA0 // Fan2 diff --git a/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV3.h b/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV3.h index cf4720a20c6b..eb6edb765ee8 100644 --- a/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV3.h +++ b/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV3.h @@ -151,7 +151,7 @@ // // Heaters / Fans // -#define FAN_PIN PE2 +#define FAN0_PIN PE2 #define FAN1_PIN PE3 #define FAN2_PIN PE4 #define FAN3_PIN PE5 diff --git a/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h b/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h index c8da0af8949c..b44061a491ab 100644 --- a/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h +++ b/Marlin/src/pins/stm32f4/pins_OPULO_LUMEN_REV4.h @@ -148,7 +148,7 @@ // // Heaters / Fans // -#define FAN_PIN PE2 +#define FAN0_PIN PE2 #define FAN1_PIN PE3 #define FAN2_PIN PE4 #define FAN3_PIN PE5 diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index 264bb91af436..ed4ba34266ec 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -118,7 +118,7 @@ #define HEATER_2_PIN PC8 #define HEATER_BED_PIN PA1 -#define FAN_PIN PC9 +#define FAN0_PIN PC9 #define FAN1_PIN PA8 // diff --git a/Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h b/Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h index 4fb57985b993..b2fec3b8341d 100644 --- a/Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h +++ b/Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h @@ -162,8 +162,8 @@ // #define HEATER_BED_PIN PC9 #define HEATER_0_PIN PC8 -#ifndef FAN_PIN - #define FAN_PIN PC6 +#ifndef FAN0_PIN + #define FAN0_PIN PC6 #endif #define FAN1_PIN PC7 diff --git a/Marlin/src/pins/stm32f4/pins_TRONXY_V10.h b/Marlin/src/pins/stm32f4/pins_TRONXY_V10.h index 475dc42266a0..21158f7af94d 100644 --- a/Marlin/src/pins/stm32f4/pins_TRONXY_V10.h +++ b/Marlin/src/pins/stm32f4/pins_TRONXY_V10.h @@ -152,7 +152,7 @@ #define HEATER_BED_PIN PE2 // HOT BED //#define HEATER_BED_INVERTING true -#define FAN_PIN PG0 // FAN0 +#define FAN0_PIN PG0 // FAN0 #define FAN1_PIN PB6 // FAN1 #define FAN2_PIN PG9 // FAN2 #define FAN3_PIN PF10 // FAN3 diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 21ab9d0e7019..eba63c5a5be6 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -129,8 +129,8 @@ #define HEATER_1_PIN PD14 #define HEATER_BED_PIN PD12 -#ifndef FAN_PIN - #define FAN_PIN PD13 +#ifndef FAN0_PIN + #define FAN0_PIN PD13 #endif #define FAN1_PIN PB5 // PA0 #define FAN2_PIN PB4 // PA1 diff --git a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h index 48f986e2ca70..6f5c179d1c57 100644 --- a/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h +++ b/Marlin/src/pins/stm32f7/pins_NUCLEO_F767ZI.h @@ -154,8 +154,8 @@ #define HEATER_0_PIN PA15 // PWM Capable, TIM2_CH1 #define HEATER_BED_PIN PB3 // PWM Capable, TIM2_CH2 -#ifndef FAN_PIN - #define FAN_PIN PB10 // PWM Capable, TIM2_CH3 +#ifndef FAN0_PIN + #define FAN0_PIN PB10 // PWM Capable, TIM2_CH3 #endif #define FAN1_PIN PB11 // PWM Capable, TIM2_CH4 diff --git a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h index c4feba692fd8..f13eba8ef341 100644 --- a/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h +++ b/Marlin/src/pins/stm32f7/pins_REMRAM_V1.h @@ -95,8 +95,8 @@ #define HEATER_0_PIN 33 #define HEATER_BED_PIN 31 -#ifndef FAN_PIN - #define FAN_PIN 30 // "FAN1" +#ifndef FAN0_PIN + #define FAN0_PIN 30 // "FAN1" #endif #define FAN1_PIN 32 // "FAN2" diff --git a/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h b/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h index 138397fa1178..c79f8ab0843d 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_EBB42_V1_1.h @@ -135,7 +135,7 @@ // Heaters / Fans // #define HEATER_0_PIN PA2 // "HE" -#define FAN_PIN PA0 // "FAN0" +#define FAN0_PIN PA0 // "FAN0" #define FAN1_PIN PA1 // "FAN1" // diff --git a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h index 84bf758777f7..57e257a7ba14 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_E3_EZ_V1_0.h @@ -189,7 +189,7 @@ #define HEATER_1_PIN PB10 // "HE1" #define HEATER_BED_PIN PB2 // "HB" -#define FAN_PIN PA8 // "FAN0" +#define FAN0_PIN PA8 // "FAN0" #define FAN1_PIN PB15 // "FAN1" #define FAN2_PIN PB14 // "FAN2" diff --git a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M4P_V1_0.h b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M4P_V1_0.h index 7096cfbfbdd5..276c95114392 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M4P_V1_0.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M4P_V1_0.h @@ -153,7 +153,7 @@ #define HEATER_0_PIN PC8 // "HE" #define HEATER_BED_PIN PD8 // "HB" -#define FAN_PIN PD2 // "FAN0" +#define FAN0_PIN PD2 // "FAN0" #define FAN1_PIN PD3 // "FAN1" #define FAN2_PIN PD4 // "FAN2" diff --git a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M5P_V1_0.h b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M5P_V1_0.h index 59c2b0f97c23..737330d35107 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M5P_V1_0.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M5P_V1_0.h @@ -175,7 +175,7 @@ #define HEATER_1_PIN PA7 // "HE1" #define HEATER_BED_PIN PA5 // "HB" -#define FAN_PIN PA4 // "FAN0" +#define FAN0_PIN PA4 // "FAN0" #define FAN1_PIN PA3 // "FAN1" // diff --git a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h index 631b50d0f2f6..2c778f873239 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_MANTA_M8P_common.h @@ -229,7 +229,7 @@ #define HEATER_2_PIN PB6 // HE2 #define HEATER_3_PIN PE1 // HE3 -#define FAN_PIN PE6 // FAN0 +#define FAN0_PIN PE6 // FAN0 #define FAN1_PIN PE0 // FAN1 #define FAN2_PIN PC12 // FAN2 #define FAN3_PIN PE5 // FAN3 diff --git a/Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h b/Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h index f71b7b40ebd1..9be2357043c1 100644 --- a/Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h +++ b/Marlin/src/pins/stm32g0/pins_BTT_SKR_MINI_E3_V3_0.h @@ -136,7 +136,7 @@ // #define HEATER_0_PIN PC8 // "HE" #define HEATER_BED_PIN PC9 // "HB" -#define FAN_PIN PC6 // "FAN0" +#define FAN0_PIN PC6 // "FAN0" #define FAN1_PIN PC7 // "FAN1" #define FAN2_PIN PB15 // "FAN2" diff --git a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h index 9ddd46d6cda4..c414ac619b8f 100644 --- a/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h +++ b/Marlin/src/pins/stm32h7/pins_BTT_OCTOPUS_MAX_EZ.h @@ -253,7 +253,7 @@ #define HEATER_2_PIN PF9 // Heater2 #define HEATER_3_PIN PF7 // Heater3 -#define FAN_PIN PA6 // Fan0 +#define FAN0_PIN PA6 // Fan0 #define FAN1_PIN PA5 // Fan1 #define FAN2_PIN PA4 // Fan2 #define FAN3_PIN PA3 // Fan3 diff --git a/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX_common.h b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX_common.h index 245567c27c62..7f5f5269d142 100644 --- a/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX_common.h +++ b/Marlin/src/pins/stm32h7/pins_BTT_SKR_SE_BX_common.h @@ -158,7 +158,7 @@ #define HEATER_1_PIN PC5 #define HEATER_BED_PIN PA4 -#define FAN_PIN PA5 // "FAN0" +#define FAN0_PIN PA5 // "FAN0" #define FAN1_PIN PA6 // "FAN1" #define FAN2_PIN PA7 // "FAN2" diff --git a/Marlin/src/pins/stm32h7/pins_BTT_SKR_V3_0_common.h b/Marlin/src/pins/stm32h7/pins_BTT_SKR_V3_0_common.h index c05ae971cfa8..cafd30bf63ee 100644 --- a/Marlin/src/pins/stm32h7/pins_BTT_SKR_V3_0_common.h +++ b/Marlin/src/pins/stm32h7/pins_BTT_SKR_V3_0_common.h @@ -239,8 +239,8 @@ #ifndef HEATER_BED_PIN #define HEATER_BED_PIN PD7 // Hotbed #endif -#ifndef FAN_PIN - #define FAN_PIN PB7 // Fan0 +#ifndef FAN0_PIN + #define FAN0_PIN PB7 // Fan0 #endif #if HAS_CUTTER diff --git a/Marlin/src/pins/teensy2/pins_5DPRINT.h b/Marlin/src/pins/teensy2/pins_5DPRINT.h index 9eb1da36f413..798f98dae509 100644 --- a/Marlin/src/pins/teensy2/pins_5DPRINT.h +++ b/Marlin/src/pins/teensy2/pins_5DPRINT.h @@ -133,8 +133,8 @@ #define HEATER_0_PIN 15 // C5 #define HEATER_BED_PIN 14 // C4 -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A #endif // diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h index bbda3730ee00..900eae6dd49e 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE.h @@ -120,8 +120,8 @@ #define HEATER_0_PIN 32 // A4 Extruder #define HEATER_BED_PIN 18 // E6 Bed -#ifndef FAN_PIN - #define FAN_PIN 31 // A3 Fan +#ifndef FAN0_PIN + #define FAN0_PIN 31 // A3 Fan #endif // diff --git a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h index 969ec845588f..a1ef48e524e6 100644 --- a/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h +++ b/Marlin/src/pins/teensy2/pins_BRAINWAVE_PRO.h @@ -126,8 +126,8 @@ // #define HEATER_0_PIN 27 // B7 #define HEATER_BED_PIN 26 // B6 Bed -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 Fan, PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 Fan, PWM3A #endif // diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h index 1fb7387d160c..f80576b50969 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD.h @@ -118,8 +118,8 @@ #define HEATER_2_PIN 45 // F7 #define HEATER_BED_PIN 14 // C4 PWM3C -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A #endif // diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 5ce106b485cc..06496abdcd00 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -203,8 +203,8 @@ #endif #endif -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A #endif // diff --git a/Marlin/src/pins/teensy2/pins_SAV_MKI.h b/Marlin/src/pins/teensy2/pins_SAV_MKI.h index a469bba59b32..5044af75d353 100644 --- a/Marlin/src/pins/teensy2/pins_SAV_MKI.h +++ b/Marlin/src/pins/teensy2/pins_SAV_MKI.h @@ -116,8 +116,8 @@ #define HEATER_0_PIN 15 // C5 PWM3B - Extruder #define HEATER_BED_PIN 14 // C4 PWM3C - Bed -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A #endif // diff --git a/Marlin/src/pins/teensy2/pins_TEENSY2.h b/Marlin/src/pins/teensy2/pins_TEENSY2.h index b95e9cae48a1..b31c17386943 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSY2.h +++ b/Marlin/src/pins/teensy2/pins_TEENSY2.h @@ -149,8 +149,8 @@ // #define HEATER_0_PIN 15 // C5 PWM3B Extruder #define HEATER_BED_PIN 14 // C4 PWM3C -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A Fan +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A Fan #endif // diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index 294a289cdb0d..81bb56349fb1 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -133,8 +133,8 @@ #define HEATER_0_PIN 15 // C5 PWM3B - Extruder #define HEATER_BED_PIN 14 // C4 PWM3C -#ifndef FAN_PIN - #define FAN_PIN 16 // C6 PWM3A +#ifndef FAN0_PIN + #define FAN0_PIN 16 // C6 PWM3A #endif // diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index 0edb5cb19dbd..ee5466b54da4 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -71,8 +71,8 @@ #define HEATER_0_PIN 20 //#define HEATER_1_PIN 36 #define HEATER_BED_PIN 21 -#ifndef FAN_PIN - #define FAN_PIN 22 +#ifndef FAN0_PIN + #define FAN0_PIN 22 #endif // diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 71c348536a7f..289a8acb1c37 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -57,7 +57,7 @@ * 3.3V | | GND * Z_STOP_PIN 24 | 40 * * 53 | A22 DAC1 * AUX2 25 | 41 * * 52 | A21 DAC0 - * AUX2 FAN_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS + * AUX2 FAN0_PIN SCL2 TX1 26 | 42 * * 51 | 39 A20 MISO0 SDSS * AUX2 Z-PROBE PWR SCK0 RX1 27 | * * * * * | 38 A19 PWM SDA1 * AUX2 SOL1_PIN MOSI0 28 | 43 * * 50 | 37 A18 PWM SCL1 * D10 CONTROLLER_FAN_PIN CAN0TX PWM 29 | 44 * * 49 | 36 A17 PWM @@ -109,8 +109,8 @@ #define HEATER_0_PIN 30 #define HEATER_1_PIN 36 #define HEATER_BED_PIN 31 -#ifndef FAN_PIN - #define FAN_PIN 2 +#ifndef FAN0_PIN + #define FAN0_PIN 2 #endif #define TEMP_0_PIN 2 // Extruder / Analog pin numbering: 2 => A2 diff --git a/Marlin/src/pins/teensy4/pins_TEENSY41.h b/Marlin/src/pins/teensy4/pins_TEENSY41.h index 21a1ff675f24..263d9e8f8b08 100644 --- a/Marlin/src/pins/teensy4/pins_TEENSY41.h +++ b/Marlin/src/pins/teensy4/pins_TEENSY41.h @@ -53,10 +53,10 @@ * 3.3V | | GND * Z_STOP_PIN PWM 24 | | 41 A17 * E0_ENABLE_PIN PWM 25 | | 40 A16 - * FAN_PIN MOSI1 26 | | 39 A15 MISO1 X_STOP_PIN + * FAN0_PIN MOSI1 26 | | 39 A15 MISO1 X_STOP_PIN * Z-PROBE PWR SCK1 27 | * * * * * | 38 A14 Y_STOP_PIN * SOL1_PIN RX7 PWM 28 | | 37 PWM HEATER_0_PIN - * FAN_PIN TX7 PWM 29 | | 36 PWM HEATER_BED_PIN + * FAN0_PIN TX7 PWM 29 | | 36 PWM HEATER_BED_PIN * X_CS_PIN 30 | | 35 TX8 E1_ENABLE_PIN * y_CS_PIN 31 | SDCARD | 34 RX8 E1_DIR_PIN * Z_CS_PIN 32 |_______________| 33 PWM E1_STEP_PIN @@ -107,8 +107,8 @@ #define HEATER_0_PIN 37 #define HEATER_1_PIN 18 #define HEATER_BED_PIN 36 -#ifndef FAN_PIN - #define FAN_PIN 29 +#ifndef FAN0_PIN + #define FAN0_PIN 29 #endif // diff --git a/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c index 5c7c301f8218..4c0a7e4fa1bc 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/MARLIN_FYSETC_SPIDER_KING407/PeripheralPins.c @@ -191,7 +191,7 @@ WEAK const PinMap PinMap_PWM[] = { {PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4 FAN2_PIN //{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 //{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N FAN_PIN + {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N FAN0_PIN {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1 FAN1_PIN {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N HEATER_BED_PIN //{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2