Skip to content

Latest commit

 

History

History
30 lines (22 loc) · 1.57 KB

README.md

File metadata and controls

30 lines (22 loc) · 1.57 KB

ESP-01 Programming board for ESP8266

DIY board that simplify the flash write for the ESP-01 module of ESP8266.

ESP-01_Programming_Board

It can be both flash writing and program execution while the connected by USB-Serial with host PC.
ESP8266 will transition to the flash programming state when GPIO0 is the low level at reset. This programming board is equipped RESET button and FLASH button for controlling the flash programming state transition.
Press and release the RESET button while hold down the FLASH button, ESP8266 will be flash program state. You can operate remains connected to PC with USB serial and ESP8266 could be programming and running without turn off the connection.

You can easily make a it yourself with universal board and few parts.

  1. Tact switch 5x5mm 2pcs.
  2. 3mm LED
  3. 180Ω
  4. 10KΩ
  5. 47KΩ 2pcs.
  6. TLV1117-3.3
  7. Ceramic capacitor 0.01μF 2pcs.
  8. Ceramic capacitor 10μF 2pcs. (monolithic recommended)
  9. 2x4Pin double row female straight pin-header
  10. 1x5Pin single row male right angle pin-header
  11. PCB Universal board

Schematic

schematic

ESP-01_Programming_Board ESP-01_Programming_Board