From a5f1627ce40acb3c911766f1a1f3580f62f1253e Mon Sep 17 00:00:00 2001 From: John Robertson Date: Sat, 18 Mar 2023 10:33:15 +0000 Subject: [PATCH] =?UTF-8?q?=F0=9F=94=A7=20Sanity-check=20PRINTCOUNTER=5FSA?= =?UTF-8?q?VE=5FINTERVAL=20+=20ESP32=20I2S=20Exp=20(#25527)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Co-authored-by: Scott Lahteine --- Marlin/src/HAL/ESP32/inc/SanityCheck.h | 4 ++++ Marlin/src/HAL/LPC1768/inc/Conditionals_post.h | 2 +- Marlin/src/HAL/STM32/inc/Conditionals_post.h | 2 +- Marlin/src/inc/Warnings.cpp | 2 +- Marlin/src/module/printcounter.cpp | 2 +- 5 files changed, 8 insertions(+), 4 deletions(-) diff --git a/Marlin/src/HAL/ESP32/inc/SanityCheck.h b/Marlin/src/HAL/ESP32/inc/SanityCheck.h index 8c5621f10c028..2d1b850330907 100644 --- a/Marlin/src/HAL/ESP32/inc/SanityCheck.h +++ b/Marlin/src/HAL/ESP32/inc/SanityCheck.h @@ -56,3 +56,7 @@ #if BOTH(I2S_STEPPER_STREAM, LIN_ADVANCE) && DISABLED(EXPERIMENTAL_I2S_LA) #error "I2S stream is currently incompatible with LIN_ADVANCE." #endif + +#if BOTH(I2S_STEPPER_STREAM, PRINTCOUNTER) && PRINTCOUNTER_SAVE_INTERVAL > 0 && DISABLED(PRINTCOUNTER_SYNC) + #error "PRINTCOUNTER_SAVE_INTERVAL may cause issues on ESP32 with an I2S expander. Define PRINTCOUNTER_SYNC in Configuration.h for an imperfect solution." +#endif diff --git a/Marlin/src/HAL/LPC1768/inc/Conditionals_post.h b/Marlin/src/HAL/LPC1768/inc/Conditionals_post.h index 35499500081a6..a0bf4215383e3 100644 --- a/Marlin/src/HAL/LPC1768/inc/Conditionals_post.h +++ b/Marlin/src/HAL/LPC1768/inc/Conditionals_post.h @@ -30,5 +30,5 @@ // LPC1768 boards seem to lose steps when saving to EEPROM during print (issue #20785) // TODO: Which other boards are incompatible? #if defined(MCU_LPC1768) && ENABLED(FLASH_EEPROM_EMULATION) && PRINTCOUNTER_SAVE_INTERVAL > 0 - #define PRINTCOUNTER_SYNC 1 + #define PRINTCOUNTER_SYNC #endif diff --git a/Marlin/src/HAL/STM32/inc/Conditionals_post.h b/Marlin/src/HAL/STM32/inc/Conditionals_post.h index c5ce66a26f54d..83ce077c754de 100644 --- a/Marlin/src/HAL/STM32/inc/Conditionals_post.h +++ b/Marlin/src/HAL/STM32/inc/Conditionals_post.h @@ -30,5 +30,5 @@ // Some STM32F4 boards may lose steps when saving to EEPROM during print (PR #17946) #if defined(STM32F4xx) && ENABLED(FLASH_EEPROM_EMULATION) && PRINTCOUNTER_SAVE_INTERVAL > 0 - #define PRINTCOUNTER_SYNC 1 + #define PRINTCOUNTER_SYNC #endif diff --git a/Marlin/src/inc/Warnings.cpp b/Marlin/src/inc/Warnings.cpp index f6dd97c096e8f..70ff5417f932a 100644 --- a/Marlin/src/inc/Warnings.cpp +++ b/Marlin/src/inc/Warnings.cpp @@ -715,7 +715,7 @@ #warning "Creality 4.2.2 boards come with a variety of stepper drivers. Check the board label (typically on SD Card module) and set the correct *_DRIVER_TYPE! (C=HR4988, E=A4988, A=TMC2208, B=TMC2209, H=TMC2225, H8=HR4988). (Define NO_CREALITY_422_DRIVER_WARNING to suppress this warning.)" #endif -#if PRINTCOUNTER_SYNC +#if ENABLED(PRINTCOUNTER_SYNC) #warning "To prevent step loss, motion will pause for PRINTCOUNTER auto-save." #endif diff --git a/Marlin/src/module/printcounter.cpp b/Marlin/src/module/printcounter.cpp index 3b6239c667ee1..f3d9ec8a9d852 100644 --- a/Marlin/src/module/printcounter.cpp +++ b/Marlin/src/module/printcounter.cpp @@ -41,7 +41,7 @@ Stopwatch print_job_timer; // Global Print Job Timer instance #include "../libs/buzzer.h" #endif -#if PRINTCOUNTER_SYNC +#if ENABLED(PRINTCOUNTER_SYNC) #include "../module/planner.h" #endif