More Information

If you like it/want to help leave some feedback:

Dicussion Page
Developer Dicussion

If you have a bug/want a new feature or card, leave some feedback on the Issue Tracker

Release Notes

v1.4.2 (2024/5/xx)

BDF:

added:
- added PBUSH2D-MSC, add_pbush2d_cross (only CROSS is saupported)
- added NX extrap flag (default=0) is not used on TABLED1-D3, TABLEM1-M3, and TABLEST
- MATT11
changed:
- MONPNT2 now uses lists for tables, element_types, nddl_items, eids to support NX Nastran
- DRESP1, DRESP2, DRESP3 region=None is now stored as 0
fixed:
- DVPREL2, DVMREL2, DVCREL2 can use only labels (and no DESVARs)
- SPLINE5 add_card out of range bug
- fixed MATT8 bug where table ids are not set to None when they're 0 and are thus xref'd
- MATS1: NLEAS and NLEAST are the same thing
- PBUSH: -2 field is supported
- MONPNT3 is now an NX card as well and references GROUPs instead of SETs
- TSTEPNL:
  - maxqn >= 0 used now (instead of > 0)
  - eps_u and eps_w can now be negative
  - max_bisect can now be -9 to 0
  - kstep can now be 1
- NLPARM:
  - eps_u and eps_w can now be negative
- DRESP1:
  - ERP, FRSPCF, FRVELO, FRSTRE, FRFORC supported

OP2:

added:
- adding flutter design response (type=84)
- vg_vf_response (from OVG table)
changed:
- Glue forces f06 writing now listed under "glue forces" and not "contact forces"
- split cards to avoid op2/f06 errors
  - contact_slide_distance: RealSlideDistanceArray (vs. DisplacementArray)
  - glue_contact_slide_distance: RealSlideDistanceArray (vs. DisplacementArray)
  - bolt_results: RealBoltResultsArray (vs. DisplacementArray)
fixed:
- CSTM no longer print out when it's empty
- rms cpyram_stress/strain no longer cause crashes

OP2Geom:

added:
- thermal: VIEW, VIEW3D
- NX acoustic: PAABSF, MATPOR-JCA
- other: ACCEL, PAERO4, PBUSH2D-CROSS, CBUSH2D, BNDGRID, MATT11, BNDGRID
- DRESP1-NX:
  - PSDVELO, ERP, FLUTTER now supported
- added DOPTPRM-NX-196
- added extrap flag for tables TABLED1-D3, TABLEM1-M3
- added TABLEST
changed:
fixed:
- fixing 64-bit MAT9 bug
- fixed TABLED1, TABLEM1 64-bit reading
- fixed SPLINE5-MSC ftype reading bug
- fixed MONPNT2-NX parsing
- TODO: fix EIGC kstep bug (is set to the BDF incorrectly and then writes followed by reading poorly)

F06:

added:
- DSCMCOL f06 writing
- CDDATA (cambell diagrams) f06 writing
- contact_slide_distance/glue_contact_slide_distance f06 writing
- DESVAR f06 writing
- Convergence f06 writing
changed:
- removed frequency filter for flutter_response
fixed:
- fixed bug in complex eigenvector f06 writing (left off mode id from table header)

op2_writer:

added:
- edom: DRESP1, DVCREL1, DVGRID
- dit: GUST, TABDMP1, TABRNDG, TABLED1-D4, TABLEM1-M4, TABLES1, TABLEST, TABLEH1
- geom2: CMASS1-CMASS4 writing
- contact_slide_distance, glue_contact_slide_distance, bolt_results
- added OUG1S (eigenvector_structure)
fixed:
- fixed bug for RBAR where blank component values had issues
- fixed LSEQ bug when only thermal load is used
- fixed CAERO3 list_w, list_c1, list_c2 None bug

nastran_to_vtk:

added:
- vtk/vtu support depending on filename
- added log_level argument (debug, info, warning, error; default='error')
- added LZMA compression_level argument (0-9; default=5)
changed:
- renaming vtk_filename -> vtu_filename for clarity (vtu is preferred)
- added icase to every result to avoid -1, -2, ... at the end of the result name
fixed:
- passing in an op2/op2geom for bdf_filename no longer fails the bdf_filename = '' check

GUI:

added:
changed:
fixed:
- fixed CONM2 updating bug (vtkPoints were missing)
- TODO: add highlight to SMT window
- TODO: figure out who SMT axes takes over the global axis
known issues:
- area_picker picks all nodes associated with picked elements (not just boxed nodes); highlight menu works though
- Groups:
  - node id picking for active groups is buggy (area_pick, highlight menu)
  - legend doesn't limit min/max when group is active
  - extra arrows (e.g., load_vectors) are shown when group is active

v1.4.1 (2024/3/25)

This is a mainly a bug fix release. There's also a couple of new acoustic cards and MSC's STRESSA table that were added to fix some errors.

The force/bending moment diagrams have also been improved:

Loads popup
Visuals to indicate the location of the cutting planes
Element ids may also be explicitly limited now
You can pick the plot x-axis (global x/y/z vs. distance)

BDF:

changed (trivial):
- moving ACMODL writing to dynamics
- reorg on AddCard class to make it easier to find cards
added:
- PLOAD2s now support 7+ values (requires MSC >= 2018; NX doesn't support this)
- CBUSH centroid to fix grid point forces bug
- acoustic: PMIC, ACPLNW, AMLREG, MATPOR, MICPNT
- is_acoustic() flag
fixed:
- add_tempbc was named incorrectly (was tempbc)
- MONDSP1 comp field can be a string (e.g., PLATE)
- CBUSH x-vector normalization bug; was a min/max equality check, so [1,1,1] failed; now a norm check)
- RBE3s have a bug in MSC Nastran where double precision causes an issue in MSC Nastran if there is a single weight that is greater than or equal to 2.0; RBE3s now always use single precision
- fixing TEMP writing when ntemperatures > 3
- ACMODL for NX wrote/expected ctype in the wrong field

OP2:

added:
- op2_results.stressa (for MSC)
- support for more Simcenter and Optistruct versions
- adding OES1A table; stores results in stressa. for MSC Nastran
fixed:
- trmbd/trmbu results read in properly
- strain.ctetra/cpenta_strain hdf5 results read in properly
- fixing 64-bit MSC version bug by settig is_interlaced = False
- fixing 64-bit support for stress/strain-CSHEAR

OP2Geom:

changed:
- explicitly stopping on mesh adaptation cards (e.g., PVAL, PCURV, PINT, GMSURF, ADAPT, ...)
added:
- acoustic PMIC, AMLREG, ACPLNW, CHEXA/CROD, MICPNT, MATPOR-CRAGGS
fixed reading:
- CFAST-NX reading should always work now (ida, idb, gs, xyzs added to reader)
- FORCE, MOMENT 64-bit support

other:

nastran_to_vtk:
- now supports op2_filename='' to only convert geometry
- fixed bug when result names are duplicated

GUI:

preferences menu split out into nastran and non-nastran specific parameters
added:
- Shear-Moment-Torque menu:
  - remove unused time box
  - added icase flag to allow changing case
  - added line/points to indicate start/end and intermediate plane locations
  - added length scale/unit
  - added scripting message
  - added Station Label to more clearly indicate location for 2D plots
  - added analysis element_ids
  - added popup for SMT results
- Groups / GroupsMenu
  - active element ids are now copyable
  - added node ids to groups for informational purposes
  - groups menu delete sorted bug (can't sort int/str)
fixed:
- fixed Nastran results bug von mises for plate stress/strain
- fixed corner text min/max bug (should be default, not same as legend)
- fixed legend disappearing when previous result is GridPointForces
- fixed issue with GUI not loading if json file doesn't exist
nastran reader:
- fixed acoustic PMIC crash (property was expected and not found without PMIC)
known issues:
- area_picker picks all nodes associated with picked elements (not just boxed nodes); highlight menu works though
- Groups:
  - node id picking for active groups is buggy (area_pick, highlight menu)
  - legend doesn't limit min/max when group is active
  - extra arrows (e.g., load_vectors) are shown when group is active

v1.4.0 (2024/2/29)

Programmatics:

Supports Python 3.8-3.12
much improved MSC 2020/2021 and OptiStruct support
support for PyQt5 and PySide2 (GUI)
support for latest numpy/h5py

BDF:

new cards:
- BGSET, BGADD, BCTPARM, BCBODY, BCPARA, TOPVAR, MATEV, PCOMPLS
- TABDMP1, PBUSH_OPTISTRUCT
convert:
- messages should be clearer (only the relevant conversions to your model are written)
mirror:
- adding punch flag
mass_properties:
- CONM2 considers inertia
equivalence
- now supports node sets as a list[list[int]], list[numpy array], list[set[int]]
quality:
- added warping
renumber:
- AUTOSPC support
new arguments:
- adding validate flag (default=False) option to add_flutter method
- adding extrap=0 flag (for NX) to TABLED* and TABLEM*
- tref support in RBE2, RBE3, RBAR
- ge_matrix support for MSC MAT2
- added support for MSC 2021 PBUSH alpha, tref, coinl parameters
new features
- added node now has a get_position_wrt_coord_ref method
- aero panels now have a 'plot' method, which will plot aero subpanels and points
- FLUTTER card initialization now has a validate option (default=False)
- MPC now has dependent_dofs, independent_dofs, independent_nodes, dependent_nodes properties
fixing:
- CAERO1, CAERO5, CAERO7 paneling bug (nodes and sub-elements should be defined chordwise)
- adding more fields to add_* methods for CPLSTS*, CPLSTN*
- better DTABLE handling
- DRESP1 checks (with validate=True flag)
- CBEAM.get_field now works
  - now uses nodes/nodes_ref instead of ga/ga_ref and gb/gb_ref
- RBE3.get_field now works
- better NLPARM checks
- PBUSH1D parsing is more lax
- fixing DOPTPRM OPTCOD bug
- fixing subcase=0 bug
- PLOAD2 may have 6 eids (not 5)
- MAT8 is allowed for a DVMREL2
changes:
- more use of warnings.warn instead of print when log doesn't exist
- CONM2 positive semi-definite check is relaxed as it's the sum of masses on a node (not just due to one element) that has to be positive semi-definite
- test_bdf now has volume > 0 requirement for solids

OP2:

MSC 2020 support
support for load_geometry in read_op2
reworked OES/OEF table reading to more robustly handle sort/format codes
grid point forces
- fixed crash in GPFORCE shear_moment_diagram (shear/moment/torque plotter)
- extract_interface_loads now returns force and moment
  - see _extract_interface_loads if you want the old behavior
vectorized real cbeam_stress/strain
improved NX 64-bit support
MATPOOL objects are now stored in a Matrix object
- matrices should work much better in 64 bit
reorganized op2 to limit function bleedover into OP2 class
new results:
- modal shock
- RealSolidArrayNx
- adding ONMD: op2.op2_results.responses.normalized_mass_density
  - topology optimization result
- RealCompositePlateStrengthRatioArray
- RealSolidCompositeArray
- random sort2
  - CTRIA3/6
  - CQUAD4/8
- model.op2_results.separation_initial
- model.op2_results.separation_final
- model.glue_forces
- model.contact_tractions_and_pressures
- model.contact_forces
- model.op2_results.stress.chexa_compostite_stress/strain
- model.op2_results.strain_energy.cbeam3_strain_energy
- model.op2_results.strain_energy.cfast_strain_energy
- model.op2_results.strain_energy.cseam_strain_energy
- model.grid_point_surface_strains
- model.grid_point_strains_volume_direct
- model.grid_point_strains_volume_principal
- model.grid_point_strain_discontinuities
- model.op2_results.responses.normalized_mass_density
deprecated results
- op2.crod_stress is now op2.op2_results.stress.crod_stress
- op2.crod_strain is now op2.op2_results.strain.crod_strain
- op2.crod_strain_energy is now op2.op2_results.strain_energy.crod_strain_energy
removed:
- VU elements (MSC/NX recently removed these)
vectorized most op2 writing
bug fixes:
- fixed pandas 1.1 issue
- GPL bug
- improved regex support for including/excluding results
- GPDT/S and BGPDT/S tables bugs fixed
- fixes for composite strength ratios and failure indices

OP2 Geom:

adding DVTREL1, DMNCON, GROUP
params: MDLPRM
now works when no subcases are included :)
added many aero (EDT) and optimization (EDOM) cards
32/64-bit modern MSC support
- MSC 2020 is very different than MSC 2005
- many cards changed (e.g., the CQUAD4) to simplify I/O
64-bit NX support
improved:
- DSCREEN support
- much better CBAR/CBEAM offt flag
dual cards:
- dual cards are cards that are different:
  - across different versions of Nastran (MSC vs NX) or (MSC 2020 vs. MSC 2021)
  - across different solutions (e.g., static vs. nonlinear)
- new:
  - MAT2; (known issue: crashes if you have negative matrial ids)
  - DCONSTR, PBUSH
- changed:
  - N/A
adding:
- tables: TABLEH1, TABLEHT
- loads: QVECT
- aero: CAERO3, CAERO4, PAERO5, DIVERG, SET1, AELINK, MONPNT1, MONPNT2, MONPNT3, MONDSP1
- mixed single/double precision for defining CORD2R/CORD2C
- DTI,UNITS
- MATT8
bug fixes:
- NLRSFD bug
- SPLINE3 bug
- PBUSH1D parsing bug (swapped equations for tables)
- RBAR writing bug
- RSPINT bug fix
- better PBEAM-PBCOMP identification

OP2 writer:

SET1
adding AELINK, MONPNT1, MONPNT2, MONPNT3, MONDSP1, SET1, CAEROx, AEFORCE, AEPRESS, DVPREL1, DVMREL1
vectorized op2 writing for most objects
support for downcasting of ids (op2 requires 32-bit ids)
fixed:
- 64-bit ints before writing ids (to avoid improperly sized arrays)
- BSET1 was written as CSET1 and vice-versa

OP4:

MATPOOL objects are now stored in a Matrix object

Additional Formats:

AVL:
- sine/cosine/equal spacing
- proper classes
Abaqus:
- many more cards supported and more accurately
- halfway decent abaqus_to_nastran converter
Tecplot:
- binary Tecplot support

GUI:

removed PyQt6/PySide6 support (they're buggy)
nastran:
- reworked results, so displacement, solid/plate/compostite-plate stress/strain are much nicer
- added shear-moment-torque/grid-point-forces menu
- adding nastran_to_vtk to export bdf/op2 to Paraview
- transient/complex fringe only animations now supported
- MOMENT card supported in gui
- NX nonlinear solid element supported
- added contact_forces & glue_forces
- faster 3d bar visualization
- added warping
- minor speedups for loading geometry
- CPYRAM13 fixed
- xoffset finite bug
general gui support:
- new icons
- "Probe All" support to probe values across all results
- GUI now supports localization based on system configuration (e.g., 1,0 is 1.0 in some countries)
- many new preferences (e.,g. highlight point size)
- json file used for preferences instead of registry (stored in C:\Users<me>\pyNastranGUI.json or ~/pyNastranGUI.json)
fixing:
- fixed bug in gif writing for profile='0 to scale to -scale to 0'
- better validation of floats
- various underflow bugs

Other:

switching to pip instead of setup.py
- see pyproject.toml or the installation section of the docs for more info
testing migrated to GithubActions
modern vtk, h5py, numpy, imageio, and pandas upgrade

v1.3.4 (2022/5/30)

This is a bug fix release with the key reason being API dependency changes:

numpy
nptyping
h5py Additional minor changes (e.g., support for CFAST/PFAST in bdf_convert) were added when fixing bugs.

Requirements/Packages:

adding support for vtk 9 (GUI)
support for PyQt5/6 and PySide2/6 (GUI)
support for NX 2019.0, 2019.1

Programmatics:

supports Python 3.7-3.10
support for nptyping 1.1.1-2.0 (removed as a required dependency)
support for h5py 3.0

overall:

typing
spelling corrections
cleaner setup.py files / packages.py

BDF:

bug fixes:
- renaming pyNastran/nptyping.py to pyNastran/nptyping_interface.py to avoid namespace conflicts
- require that nastran_format is a string
- FORCE2/MOMENT2: fixed g4 bug (can't be blank)
- FLUTTER: method can be string_or_blank (default='L')
- FLUTTER: fixing EAS sorting bug in make_flfacts_mach_sweep (mach should be sorted to give sorted EAS)
- MTRANS now supported for SOL 200 (vs only MTRAN; they're the same)
- SET1: (and more generally any card that has 1,THRU,10 or 1,THRU,10,BY,2) now supports blank values
- MATT1: g11_tid=0 update to None if it's 0
- MATT3: table_ids update to None if they're 0
- PARAM, DRESP1, DVCRELx now supports numpy int/floats
- PARAMs: better type checking
- PLOAD2: correcting number elements allowed
- PLOAD4: surf_or_line, line_load_dir set to blank when they're default (to fix NX issue)
- PBARL/PBEAML: I2 for BOX section
- PBARL: fixed I1 bug
- PBARL: I12 now returns I12 instead of [A, I1, I2, I12]
- AUTOSPC (from case control) now works in bdf_renumber
- BCTSET: fixing bug where defaults were mishandled (poor documentation in QRG)
- DEQATN: better builtin handling
- DMIG: better size/is_double handling
- large field solid writing (forgot the *)
- deepcopying a card now supports comments
- Subcase: add_op2_data supports OUG1F
- test_bdf: fixed bug when subcase=0 was the only subcase
- test_bdf: fixed bug that dropped the global subcase
  - it's not used unless there are no local subcases
added:
- pathlib support
- GRID: method get_position_wrt_coord_ref
- MAT11: adding get_density
- DVCRELx: CMASS/M and CELAS4/K options
- DCONSTR: support for FLUTTER/PK
- DRESP1: PBEAM/PBEAML, FATIGUE support
- DRESP2: now references DNODE
- DVMREL2: now supports MAT2, MAT8
- PCOMP/G: layers must now be the same
- PCOMP: added get_material_ids(include_symmetry=True), get_thetas(include_symmetry=True), get_souts(include_symmetry=True) methods
- PCOMPG: added get_global_ply_ids(include_symmetry=True) in addition to PCOMP methods
- CAERO1/2: added aefact_ids property
- mesh_utils:
  - get_oml:
    - CTRIA6/CQUAD8/CQUAD support
    - applying np.clip to get_oml (to account for cos out of range precision issues)
  - collapse_bad_quads: now removes degenerate quads
  - bdf_mirror:
    - solid support
    - correcting case where eid_offset isn't calculated
    - fixed bug where tolerance was ignored
  - bdf_convert now supports:
    - CFAST/PFAST
    - rho, area conversion f06 flutter:
bug fixes:
- supporting any number modes
- correcting default for in/out_units (documentation error)
added:
- subcases support
- vd_limit and damping_limit
adding:
- repr
- mach, dynamic pressure, altitude plots op2:
pathlib support op2 geom:
PARAM: improved (PVT/PVT0 table) loading
PSOLID: FFLUID support
PSOLID: isop=2 support
PCOMP: ft (failure theory) HFAI, HTAP, HFAB support
QVECT: skipping
SPC: fixed bug (was double writing header)
RBE2: fixed bug (alpha vs. non alpha cases were flipped)
BSET1/CSET1: fixed mixup (were flipped) gui:
fixed CELAS2 bug where nid2 is an SPOINT other:
format_converter now has defaults if you're using the functions
atmosphere not supports velocity in cm/s

v1.3.3 (2020/6/28)

This is a bug fix only release outside of:

subcase.add_set_from_values(set_id, values) which was overly complicated to do before.

Requirements/Packages:

adding support for vtk 9 (GUI)
adding support for nptyping 1.1 (not 1.1.0)
support for NX 2019.0, 2019.1

BDF:

More TEMPRB defaults
DRESP2 now handles DTABLE properly when validate=True is used
TSTEPNL now handles KUPDATE (NX parameter)
fixing SET2 safe-xref
fixing SPLINE1 validate
fixing TRIM2 aeqr setting bug (was defaulted to 1.0)
fixing ACMODL for NX (didn't support writing)
fixed DCONADD bug (added the dconadd_id to the summation)
DEQATN now checks that the function name is not an argument
DEQATN now supports tabs on line continuation lines
convert:
- MAT8 now supports temperature scaling
- fixed major PSHELL 12I/t^3 convert/scale bug
optimization checks:
- DRESP1 DISP no longer limited to 1 node
- DVMREL1/2 - MAT8 now supports E2, G12, G2Z, RHO, A1, A2
- DVPREL1/2 - PLEAS now supports S1/5
- DVPREL1/2 - PSHELL now supports Z1, Z2
- DVPREL1/2 - PCOMP now supports NSM/4
- DVPREL1/2 - PSHEAR now supports NSM/5

OP2:

auto-conversion to nx for some tables
added SixtyFourBitError, which is inherited from NotImplementedError
- mainly used for op2 geometry and op2 writing
adding op2_results repr method
Convergence object has better repr

OP2 Writer:

fixed multiple PCOMP writing bug
added some 64 bit checks (64-bit writing is not supported)
turns out the CPYRAM (NX) has 14 node fields (even though it has 13 nodes)
fixed symmetric PCOMP writing

OP2 Geom:

fixed GRID, CORD2x reading from the GEOM1N table
fixed PSHELL reading bug that occurs when very large property ids exist
fixed MAT10 reading bug that occurs when very large material ids exist
fixing USET1 reading
PMASS were put in self.properties, not self.properties_mass
MATT2 tables properly handle table_ids=0 now
DEFORM and CLOAD are not the GEOM3/loads table
corrected SPC to NX bug
NX support (the card format is different than MSC)
- PENTA (doesn't exist in MSC)
- CTRIAX
- TSTEPNL
- TLOAD1 (also 64-bit)
- TLOAD2 (also 64-bit)
multiple MATS1s now work
64 bit:
- IBULK/ICASE support
- large GRID support
- multiple SEBULKs now work
- SPOINTs work now
- MAT10, MATT2, MATT3, MATT9
- supporting alternate 64-bit PCOMP
- PBARL
- NLPARM

F06 Flutter Plotter

added check for mode id > 0
better parsing of modes; '1,3:' is now supported

minor:

removal of some prints
more docstrings
more typing
fixing Tecplot to Nastran converter

GUI:

supporting max shear in plate stress/strain

v1.3.2 (2020/4/8)

With Python 2 now officially dead, it's time for a new feature to encourage people to switch.

There is now support for writing OP2 files! They're difficult to create from scratch, but modifying an existing is easy. This also includes geometry support.

In addition, many new OP2 results have been added. Modern NX Nastran should work much better.

Programmatics:

Supports Python 3.7 and 3.8
Dropping Python 2.7 and 3.6 support
GUI is compatible with PyQt5 and PySide2
improved testing of old versions of packages

BDF:

enhancements
- 405 cards supported (up from 373)
- improved mesh utilities
  - bdf mirror, bdf convert, bdf export_caero_mesh
  - additional bdf scale, which takes arbitrary mass, length, time, pressure, or velocity scale factors (3 of 5) to apply a scaling law
- added deck guessing with punch=None
- better parser for test_bdf
- PCOMPG now supports DVPRELx
- added get_position for SPOINT
- added inertia for PBARL/L
- bdf mirror:
  - added PLOTEL, RROD, RBAR, RBAR1, RBE1, AELIST, AESURF support
- bdf_equivalence:
  - method='new' no longer requires neq_max
  - use method='old' for old behavior (deprecated)
bug fixes:
new cards:
- DTI besides UNITS are now supported
- PBEAM3, TEMPB3
minor enhancements:
- handling ;; in DEQATN
- support for SURF cid=None in _get_forces_moments_array
- added check for number of loads = nscale factors for LOAD
- more PARAM validation
changes:
- warning on RBAR dof check instead of RuntimeError

OP2:

enhancements:
- OP2 write support
- fixed most pandas deprecation warnings/added support for pandas 0.25
- much improved NX 2019.2 support
minor enhancements:
- more hdf5 results
- a few more cards supported in the OP2 geometry reader
- preliminary NX 64-bit support
- more MSC versions supported
- sped up R1TABRG (optimization) reading
- various geometry cards added
- supports more PARAM reading
new results:
- composite failure indicies (OEFIT)
- sensitivity support (DSCMCOL)
- Cambpell diagrams (CDDATA)
- eigenvectors (BOPHIGF)
- grid point forces SORT2 (OGPFB2)
- stress/strain/force
  - random stress/strain (OESVM1/2, OESVM1C, OSTRVM1/2, OSTRVM2, OESXRM1C, OESXNO1, OESXNO1C)
  - real/complex stress/strain/force output for centroidal CQUADR/CTRIAR
  - complex CBEAR forces
  - real CFAST, CWELD forces
  - nonlinear cbush stress/strain/force
- other
  - XSOP2DIR
  - PSDs
  - optimization
    - convergence table
    - design variables
    - weight response
    - displacement response
    - stress response
    - strain response
    - force response
    - composite stress response
    - composite strain response
    - fractional mass response
- SOL 401/402 results:
  - eigenvalue_fluid (LAMAF, LAMAS)
  - eigenvectors (BOPHIGF, BOPHIGS)
  - temperature (OTEMP1)
  - solution set
    - results: displacement, velocity, acceleration, eigenvectors:
    - tables: OUXY1, OUXY2, OPHSA
API:
- reorganized output results to use op2_results object to simply interface
  - backwards compatibility for stress, strain, forces, strain energy
  - model.cbar_force -> model.op2_results.force.cbar_force
  - model.cbar_stress -> model.op2_results.stress.cbar_stress
  - model.cbar_strain -> model.op2_results.strain.cbar_strain
  - model.cbar_strain_energy -> model.op2_results.strain_energy.cbar_strain_energy
TODO: linear/nonlinear hyperelastic solids
TODO: stress transforms. This is probably a bit of work.
TODO: preliminary NX 64-bit support
TODO: CD transforms for cylindrical/spherical displacement, velocity, acceleration, forces. This shouldn't be terrible.

GUI:

enhancements:
- Can now load custom fringe/displacement/force results with an incorrect number of nodes/elements. It's assumed that the node/element id in the first column should be the same as the id for the model. Thus, you just filter out extra nodes/elements or you set some blank nodes/elements.
  - For integer results, no masking is applied.
  - For float results, masking is applied and nan corresponds to no color.
- animation now supports complex fringe
- result case description now shows the min/max value as well as the location
- result case description now shows the mode/time/frequency
- map centroidal to nodal option
- adding node/element highlight menu
- adding node/element mark/label menu
- result case description now shows the min/max value as well as the location
- result case description now shows the mode/time/frequency
minor enhancements:
- added export result option to right-click menu
- legend supports unicode
- more keyboard shortcuts
nastran:
- geometry:
  - added preferences for geometry/results to speed up model loading
  - element & material coordinate systems
- results
  - added acoustic displacements (OUG1F)
  - real/complex stress/strain/force results
    - plate by upper/lower, composite plates by ply, bars, rods, springs, cbush, cdamp
  - fractional mass response

F06:

KE support for plot_145

Bug fixes:

BDF:
- fixing bug in set_param
- PBARL & PBEAML DBOX now has defaults for DIM5-DIM10
- added AECOMPL, DEFORM to bdf attributes
- added RHO to MAT10 updater
- Better case control SET parser (can now handle 1,THRU,10,EXCEPT,7,8, which doesn't have spaces that makes parsing easier). It's also orders of magnitude faster on large problems.
- Fixed NDDL bug in MONPNT2
- Added check for DVPRELx to prevent referencing property fields when another similar property is used (e.g., a DVPRELx references a PCOMPG, but the PCOMP field id numbers are used to update the card).
- added some missing hdf5 object support
- fixing DEQATN bug caused by using python builtin
- fixed missing variable in mass properties error message
- aero
  - fixed issue where CAERO1 didn't set the xyz1 and xyz4 points to arrays when loading an HDF5 file
  - caero2 now sets box ids
- elements/properties
  - added I12, J to PBEAM updater; fixed error message
  - fixed Area calculation for PBARL/CHAN, HAT1, DBOX
  - fixed PBAR optimization treating I12 as I1; added J
- convert better handles:
  - T1-T4 in quad shells
  - fixed bug in CGAP x/g0
- bdf mirror:
  - fixed bug where max element id is less than max rigid_element id
  - fixed bug with shells that have blanks (e.g., CTRIA6, CQUAD8)
  - plane is now case insensitive and auto-sorted
  - CAERO1 now supports lspan/lchord and Cp
  - CAERO1 handles xy plane properly now (doesn't assume it's xz)

OP2:

geom bug fixes:
- fixed reading bugs for QHBDY and SPCOFF
- better identifying duplicate property id (PBCOMP -> PBEAM)
- fixed CONVM error (it can be 6 or 7 fields, not only 6)
- fixed ACCEL key
bug fixes:
- R1TABRG now stores response_types as strings (instead of bytes for Python 3)
- f06 writer now writes CDAMP3/4 names correctly

GUI:

bug fixes:
- better argument handling
- fixed coordinate system scaling bug
- added check on highlight menu for model existence
- fixed import for new version download menu
- improved command line error message
- fixed support for CAEROx models without elements
- export_cases now supports integers

v1.3.1 / v1.3.0 (2020/4/8)

This result has been superseded by 1.3.2. No code changes, but the PyPi page was redone.

v1.2.1 (2019/5/24)

OP2:

fixed bug with OUGV1PAT table

v1.2.0 (2019/5/21)

Programmatics:

This is the last Python 2.7 release.
Dropping Python 3.5 support
Supports Python 2.7, 3.6-3.7
GUI is compatible with PyQt4/PyQt5 as well as PySide/PySide2
improved testing of old versions of packages

BDF:

373 cards supported (up from 343)

added abiltity to write models to separate include files

>>> model = BDF()
>>> model.read_bdf(bdf_filename, save_file_structure=True)

out_filenames = {
    bdf_filename : bdf_filename_new,
    include_filename : include_filename_new,
}
>>> model.write_bdfs(out_filenames, relative_dirname=None, is_windows=None)
>>> ifile = model.grids[1].ifile

HDF5 import/export

>>> model = read_bdf(bdf_filename)
>>> model.export_hdf5_filename(hdf5_filename)
>>> model_new = OP2()
>>> model_new.load_hdf5_filename(hdf5_filename)

preliminary superelement support

>>> model.read_bdf(bdf_filename)
>>> model.superelement_models[1].nodes

OP2:

reorganization of random op2 results into op2.results.psd (or ato, no, crm, rms) to aide in finding data
reorganization of op2 class to reduce number of functions in the object. This affects any custom table reading.
improved optimzation response reading
limited SORT2 support
fixed CD transformation bug for BOUGV1 and BOPHIG1 tables
Improved HDF5 export/import support (e.g., matrices, random results)
Can optionally save directly to HDF5 instead of numpy (limited).

Loading OP2s to an HDF5 file to decrease memory usage

>>> op2_model = OP2()
>>> op2_model.load_as_h5 = True
>>> op2_model.read_op2(op2_filename)

OP2Geom:

HDF5 support
reading EQEXIN/S, GPT, GPDT, CSTM/S tables (recovery of nodes & coordinate with OP2Geom)
fixed theta/mcid reading for CTRIA3/CQUAD4
fixed CQUAD8 bug

GUI:

sped up HTML logging
much improved groups menu
options for Nastran in preferences menu to speed up loading/limit memory usage
pyNastran BDF pickle reading
pyNastran OP2 HDF5 reading (not MSC's format)
visualization when pickling nodes/elements
min/max labels
highlight menu
Patran-style colors
custom force vectors
AVL support

Known issues:

Transient Pandas Dataframes will fail for newer versions of numpy/pandas. If anyone knows how to use a MultiIndex, this is probably pretty easy to fix.

v1.1.0 (2018/6/26)

Programmatics:

Added support for numpy 1.14
Dropping support for Python 3.4 (2.7, 3.5, 3.6 are supported)
Dropping support for VTK 5/6 (7/8 are supported)

BDF:

model may be pickled (model.save('model.obj') and model.load('model.obj')
simplified cross-referencing

OP2:

model may be pickled (model.save('model.obj') and model.load('model.obj')
Added support for exporting OP2 to HDF5 (uses pyNastran format, not MSC)
real sparse matrices take much less memory now; were being converted to dense matrices

GUI:

improved animations
improved labels

BDF (detailed):

New features:
- model.get_reduced_loads(load_id)
- model.get_reduced_dloads(dload_id)
- card1 == card2 now supported
- PBARL/PBEAML support the NX TUBE2 type
- added FREQ3, FREQ5, CAERO5, PAERO5, MATT3, SPLINE3, RSSCON, OMIT1
- more xref
- added model.clear_attributes()
- renumbering:
  - bdf_renumber now supports renumbers SETs and SPLINEx cards
  - SPOINTs/EPOINTs now use dictionaries to enable SPOINT/EPOINT renumbering
  - caero sub-panels ids are now renumbered
  - renumbering mapper object returned now
- improved removed_unused card support
- improved mirroring
- read_bdf StringIO option now parses pyNastran header
- subcase copying speedup (helps with SETs)
- preliminary ZONA loading
- added atmosphere2.make_flfacts_eas_sweep, make_flfacts_mach_sweep, and make_flfacts_alt_sweep with an EAS (equivalent airspeed) limiter
- rotate_v_wa_wb for CBAR/CBEAM to determine element vectors
Bug fixes:
- more add_card documentation (e.g., add_grid, add_ctria3)
- fixed NSMADD card type (was SPCADD)
- fixed CPLTSTN3 card type (was CTRIA3)
- fixed CPLTSTS3 card type (was CTRIA3)
- fixed shell MCIDs not renumbering
- fixed FREQx renumbering crash
- model may be pickled again (model.save('model.obj') and model.load('model.obj')
- fixed PBARL/PBEAML DBOX error
- fixed PositionWRT bug
- fixed LOAD card messing up load ids after cross referencing
- fixed TRIM default on aeqr (was 0.0/rigid; should be 1.0/elastic)
- NLPCI now gets written when there are no other dynamic cards
- fixed CBUSH cid=0 bug
- fixed TABLED4/TABLEM4 stopping error
API changes:
- model.Node(nid, allow_empty_nodes=False msg='') no longer supports allow_empty_nodes. Use: model.EmptyNode(nid, msg='') instead for that model.Node(nid, msg='') is the new form
- model.Nodes(nid, allow_empty_nodes=False msg='') no longer supports allow_empty_nodes. Use: model.EmptyNodes(nid, msg='') instead for that model.Nodes(nid, msg='') is the new form
- PCOMPG.validate() now checks that global ply ids are unique
- xref_nodes_with_elements now creates a list instead of a set (fixes a Python 3.x bug)
- get_MPCx_node_ids_c1 is now get_MPCx_node_ids_c1 (was inconsistent with what it does)
- get_MPCx_node_ids_c1 created
- xref'd objects now use _ref globally
- aestat.id is now aestat.aestat_id
- aeparm.id is now aeparm.aeparm_id
- model.add_aset1/aset (also bset/cset/qset/uset) now a consistent set of function arguments and call the same function. The card will be created based on your data instead of necessarily what you asked for.
- LOAD cards are now stored in model.load_combinations instead of model.loads
Known bugs:
- dynamic loads cross-referencing is buggy; reject the cards if there is a problem
- PBEAM defaults with ENDA are slightly incorrect.

OP2 (detailed):

New features:
- added model.set_additional_generalized_tables_to_read(tables) to create custom OP2 readers
- added complex/average strain energy
- save/load hdf5 support
- EIGRL support
Bug fixes:
- improved table skipping
- fixed RealCShearForceArray f06 writing
- fixed CEN/3, CEN/4 writing for RealPlateBilinearForceArray
- improved geometry table reading
- real sparse matrices take much less memory now; were being converted to dense matrices
- added RBAR on NX vs. MSC
- fixed RBE2 with alpha bug
- fixed CREEP bug
- fixed RBE3 bug
- fixed PBCOMP bug
API changes:
- xlsx exporter removed
Known bugs:
- pandas fails on some decks (numpy<1.13 is fine)
- a large number of PSOLIDs will crash the read_op2/read_op2_geom; use PARAM,OGEOM,NO
- transform_gpforce_to_global doesn't work properly with cylindrical or spherical coordinate systems

GUI (detailed):

New features:
- control surfaces now get labels (label size doesn't resize properly)
- in-gui animation
- delete secondary actor support
- delete result cases support
- improved view buttons
- preferences menu
- right click support on results sidebar to apply fringe/displacement/veactor results
Bug fixes:
- displays control surfaces again (aesurf)
- changing secondary actor color works again
- fixing random crash
- "Show/Hide CAERO panels" updates the "Edit Geometry Properties" menu
- "Toggle CAERO Subpanels" updates the "Edit Geometry Properties" menu
- "Toggle CONM2s" updates the "Edit Geometry Properties" menu
- fixing Windows taskbar icon bug
- fixing first launch bug
- qscintilla works in pyqt5
Known bugs:
- after animating a model from within the GUI, the mouse behavior changes

OP4 bug fixes:

fixed Python 3 bytes bug

Applictions:

removed due to excessively amount of unmaintained code

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

releaseNotes.md

releaseNotes.md

More Information

Release Notes

v1.4.2 (2024/5/xx)

v1.4.1 (2024/3/25)

v1.4.0 (2024/2/29)

v1.3.4 (2022/5/30)

v1.3.3 (2020/6/28)

v1.3.2 (2020/4/8)

v1.3.1 / v1.3.0 (2020/4/8)

v1.2.1 (2019/5/24)

v1.2.0 (2019/5/21)

v1.1.0 (2018/6/26)

Files

releaseNotes.md

Latest commit

History

releaseNotes.md

File metadata and controls

More Information

Release Notes

v1.4.2 (2024/5/xx)

v1.4.1 (2024/3/25)

v1.4.0 (2024/2/29)

v1.3.4 (2022/5/30)

v1.3.3 (2020/6/28)

v1.3.2 (2020/4/8)

v1.3.1 / v1.3.0 (2020/4/8)

v1.2.1 (2019/5/24)

v1.2.0 (2019/5/21)

v1.1.0 (2018/6/26)