CURA 5.8.1 start printing before heating the nozzle

[WeiglN]

Cura Version

5.8.1

Operating System

Windows 10

Printer

Ultimaker Original +

Reproduction steps

I constructed a simple modell with Freecad and produced a .stl File. I transfered it to Cura 5.8.1
UMO_Vogelhaus-Revolution (Meshed).txt

Actual results

The Printer starts normal with heating the bed, but when the 70° was reached printing starts.
In the G File the reason is obvious, the M 105 and M 109 is missing:
;Generated with Cura_SteamEngine 5.8.1
M140 S70
M105
M190 S70
M104 S230
M82 ;absolute extrusion mode
I tried different an older Versions 5.7.0 and that works

Expected results

Expected that the nozzle is heated before start printing

Add your .zip and screenshots here ⬇️

[LilBub]

Yes, this one has bit a few of us.
If you get the Machine Settings plug in, you can check if these things are ticked