From aeb8097cbc2b946cffe9813b5c8805c6943fd87d Mon Sep 17 00:00:00 2001 From: Taylor Talkington Date: Sat, 5 Jun 2021 00:01:06 -0400 Subject: [PATCH] =?UTF-8?q?=F0=9F=90=9B=20Fix=20M140=20print=20job=20timer?= =?UTF-8?q?=20autostart=20(#22046)?= MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit --- Marlin/Configuration.h | 19 ++++++++++++++----- 1 file changed, 14 insertions(+), 5 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 366267aa7e97..f724d8f34c44 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1824,11 +1824,20 @@ /** * Print Job Timer * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none + * Automatically start and stop the print job timer on M104/M109/M140/M190/M141/M191. + * The print job timer will only be stopped if the bed/chamber target temp is + * below BED_MINTEMP/CHAMBER_MINTEMP. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M140 (bed, no wait) - high temp = none, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * M141 (chamber, no wait) - high temp = none, low temp = stop timer + * M191 (chamber, wait) - high temp = start timer, low temp = none + * + * For M104/M109, high temp is anything over EXTRUDE_MINTEMP / 2. + * For M140/M190, high temp is anything over BED_MINTEMP. + * For M141/M191, high temp is anything over CHAMBER_MINTEMP. * * The timer can also be controlled with the following commands: *