You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
WS2811 together with ws2812 is one of the most common ledstrip on the market. WS2811 runs on 12V and hence can normally be longer then the WS2812 which runs on 5V(due to power supply)
They both uses the neopixel library, however for some odd reason the ws2811 has the colors in grb order vs rgb for the ws2812.
For now I have done it on the Openhab side of the software to avoid problems when using TasmoAdmin and upgrading devises, because USE_WS2812_CTYPE NEO_GRB will be reset when upgrading the software.
I also use WS2812 strips so it would be nice to be able to seperate them in the server of the device, i.e be able to select both WS2811 and WS2812 in the software.
The text was updated successfully, but these errors were encountered:
WS2811 together with ws2812 is one of the most common ledstrip on the market. WS2811 runs on 12V and hence can normally be longer then the WS2812 which runs on 5V(due to power supply)
They both uses the neopixel library, however for some odd reason the ws2811 has the colors in grb order vs rgb for the ws2812.
For now I have done it on the Openhab side of the software to avoid problems when using TasmoAdmin and upgrading devises, because
USE_WS2812_CTYPE NEO_GRB
will be reset when upgrading the software.I also use WS2812 strips so it would be nice to be able to seperate them in the server of the device, i.e be able to select both WS2811 and WS2812 in the software.
The text was updated successfully, but these errors were encountered: