Skip to content

Latest commit

 

History

History
33 lines (18 loc) · 1.31 KB

README.md

File metadata and controls

33 lines (18 loc) · 1.31 KB

CB2 UR5s Setup Instructions: https://i-chun-arthur.notion.site/CB2-UR5-Manual-eb8bd315645e422bb441105c421b8e22

The scripts control the UR5s using the python-urx library.

test_robotiq_gripper.py

  • Activate and control the Robotiq gripper. Note that every time you start a program you need to activate the gripper to use it.

opencv_viewer_example.py

  • Stream Intel RealSense camera.

get_robot_tool_tip_pos.py

  • Get robot’s tool tip position (x, y, z) in robot base frame.

get_set_two_robot_joints.py

  • Move the robot arms to pre-configured poses. I use this code to move the robot arms to the starting states before my experiments.

verify_camera_calibration.py

  • I use this code to test my camera calibration result. Specifically, it captures RGB-D images from the RealSense camera and display point cloud in Open3D. Then, I select a point in the viewer, and the robot arm would move its end-effector to that position.

servoj_example.py

  • Example code that moves the robot arm using joint-space control.

simultaneous_motion.py

  • Example code that executes both arms simultaneously.