Skip to content

Latest commit

 

History

History
417 lines (315 loc) · 22 KB

db_walkthrough.MD

File metadata and controls

417 lines (315 loc) · 22 KB

This document attempts to explain how Erigon organises its persistent data in its database and how this organisation is different from go-ethereum, the project from which it is derived. We start from a very simple genesis block and then apply one block containing an ETH transfer. For each step, we show visualisations produced by the code available in Erigon and code added to a fork of go-ethereum.

Genesis in Erigon

For the genesis block, we generate 3 different private keys and construct Ethereum addresses from them. Then, we endow one of the accounts with 9 ETH, and two others with 0.2 and 0.3 ETH, respectively. This is how the initial state trie looks:

genesis_state

In this and other illustrations, the colored boxes correspond to hexadecimal digits (a.k.a. nibbles), with values 0..f. Here is the palette:

hex_palette

First thing to note about the illustration of the initial state trie is that the leaves correspond to our accounts with their ETH endowments. Account nonces, in our case all 0s, are also shown. If you count the number of coloured boxes, from top to bottom, up to any of the account leaves you will get 64. Since each nibble occupies half a byte, that makes each "key" in the state trie 32 bytes long. However, account addresses are only 20 bytes long. The reason we get 32 and not 20 is that all the keys (in our case account addresses) are processed by the Keccak256 hash function (which has 32 byte output) before they are inserted into the trie. If we wanted to see what the corresponding account addresses were, we will have to look into the database. Here is what Erigon would persist after generating such a genesis block:

genesis_db

The Erigon database is a key-value store organised in tables (also commonly referred to as "buckets"). This is the list of the main tables in the database:

  • Headers
  • Block Bodies
  • Header Numbers
  • Receipts
  • PlainState
  • History Of Accounts
  • Change Sets
  • HashedState
  • IntermediateTrieHashes
  • Tx Senders

Table "Headers"

This table stores information about block headers. For each block there are three types of block header records with the following (key, value) formats:

  • FULL HEADER: contains the complete block header with all its information parameters
    • key : 8-byte big-endian block number + 32-byte block hash
    • value : the RLP-encoded block header structured as defined in the Ethereum Yellow Paper:
      • parent hash: 32-byte hash of the parent block
      • uncles hash: 32-byte hash of the uncle blocks
      • coinbase: 20-byte address beneficiary of mining reward
      • state root: 32-byte root hash of the state trie
      • transactions root: 32-byte root hash of the trie structure made up of the block transactions
      • receipts root: 32-byte root hash of the trie structure made up of the transaction receipts
      • logs bloom: 256-byte Bloom filter composed from indexable information in each log entry from the transaction receipts
      • difficulty: 8-byte scalar value corresponding to the difficulty level of this block
      • block number: 8-byte scalar value equal to the number of ancestor blocks in the chain (aka block height)
      • gas limit: 8-byte scalar value equal to the current limit of gas expenditure per block
      • gas used: 8-byte scalar value equal to the total gas used in transactions in this block
      • timestamp: 8-byte scalar value equal to the Unix epoch timestamp at the inception of this block
      • extra data: up to 32-byte array of additional relevant data for this block (at least for Eth-hash consensus engine, for Clique could be more)
      • mix_hash: 64-byte hash proving, combined with nonce, the computation amount spent in block mining
      • nonce: 8-byte value proving, combined with mix hash, the computation amount spent in block mining
  • TOTAL DIFFICULTY HEADER: contains the total mining difficulty (TD) of the chain ending in such specific block
    • key : 8-byte big-endian block number + 32-byte block hash + 0x74 suffix (ASCII code for t character)
    • value : variable-length RLP-encoded total difficulty value: the cumulative difficulty value from first block to this one
  • CANONICAL HEADER: contains the block hash
    • key: 8-byte big-endian block number + 0x6E suffix (ASCII code for n character)
    • value: 32-byte block hash

as shown in the following picture for the block 0 (from top to bottom the three types of records, key on the left and value on the right):

genesis_db_headers

You can check that for the genesis block

  • block number 0 is encoded as 0x0000000000000000 (see 8-byte zeros start of each key)
  • block hash is 0x61eb...aba1
  • logs bloom is 256-byte zeros (see the 8 white rows of all 32-byte 0s)
  • total difficulty is 0x80, which is RLP encoding of value 0

Table "Block Bodies"

genesis_db_block_bodies

The keys in this table are concatenations of 8-byte encoding of the block number and 32-byte block hash. The values are RLP-encoded list of 2 structures:

  1. List of transactions
  2. List of ommers (a.k.a uncles)

In the case of the genesis block, all of these lists are empty (RLP encodings 0xC0), and the prefix 0xC3 means in RLP "some number of sub-structures with the total length of 3 bytes".

Next three tables, "Last Header", "Last Fast", and "Last Block", always contain just one record each, and their keys are always the same, the ASCII-encodings of the strings LastHeader, LastFast, and LastBlock, respectively. The values record the block/header hash of the last header, receipt or block chains that the node has managed to sync from its peers in the network. The value in "Last Fast" bucket is not really used at the moment, because Erigon does not support Fast Sync.

Table "Header Numbers"

Is a mapping of 32-byte header/block hashes to the corresponding block numbers (encoded in 8 bytes):

genesis_db_header_numbers

Table "Receipts"

Records the list of transaction receipts for each block:

genesis_db_receipts

The 8 bytes of the key (or 16 nibbles, equaling to 0s here) encode the block number, which is 0 for the Genesis block. The value is the CBOR-encoded list of receipts. In our case, there were no transactions in the Genesis block, therefore, we have CBOR encoding of an empty list, 0xf6.

Table "PlainState"

genesis_db_accounts

Store together Accounts and Storage.

Accounts: key="account address", value="current state of each account". Storage: key="account address+incarnation+storage hash", value="current value of storage".

The accounts encoded by function account.go:EncodeForStorage() so that the first byte of a field is its length and bytes afterward the field itself. They all start with a fieldset of 0x02, for each bit set into the fieldSet a field is present. In this case 0x02 in binary is 10 meaning that only the second field is set (the balance). the order in the fieldset is the following:

  • 1st bit: Nonce
  • 2nd bit: Balance
  • 3rd bit: Incarnation
  • 4th bit: Code Hash

Therefore, immediately after the fieldset we have the length in byte of the balance: 0x08 (8 bytes). the following 8 bytes (aka. 16 nibbles) contains the hexadecimal value of the balance that in the first record would be: 0x7ce66c50e2840000.

$ python
Python 2.7.15
Type "help", "copyright", "credits" or "license" for more information.
>>> 0x7ce66c50e2840000
9000000000000000000

Which is 9 followed by 18 zeros, which is 9 ETH (1 ETH = 10^18 wei).

The third bit of the field set represent the Incarnation. The Incarnation is a Erigon specific attribute, which is used to make removal and revival of contract accounts (now possible with CREATE2 since Constantinopole) efficient with Erigon's database layout. For now it will suffice to say that all non-contract accounts will have incarnation 0 (not set), and all contract accounts will start their existence with incarnation 1.

Contract accounts may also contain a contract code hash and storage root. These two pieces of information would make the record in the "Accounts" bucket contain 5 instead of 3 fields.

Table "History Of Accounts"

genesis_db_history_of_accounts

key="account addresses + incarnation", value="encoded array of block numbers, where account changed/created".

The history of accounts records how the accounts changed at each block. But, instead of recording, at each change, the value that the accounts had after the change, it records what value the accounts had before the change. That explains the empty values here -- it records the fact that these three accounts in questions did not exist prior to the block 0.

Table "Change Sets"

Records the history of changes in accounts and contract storage. But, unlike in "History of Accounts" and "History of Storage", where keys are derived from accounts' addresses (key="address hash + block number"), in the "Change Sets" table, keys are derived from the block numbers:

genesis_db_change_sets

In the cases of our Genesis block, the key is composed from the encoding of the block number (0x20), and the ASCII-code of hAT (meaning history of Acounts Trie). The "Change Set" table records changes that happen to accounts and contract storage slots at every block. It is important to note that the values recorded in the "Changes Set" table are not the values the accounts (or storage slots) had AFTER the change, it records what value the accounts (or storage slots) had BEFORE the change. That explains the empty values here - it records the fact that these three accounts in question did not exist prior to the block 0. The encoding of the values in the records is tailored for fast access and binary search. It has 5 parts:

  1. Number of keys-value pairs, encoded as a 4-byte (32-bit) number. In this example, it is 0x00000003, which means there are 3 key-value pairs
  2. Size of each key, also encoded as a 32-bit number. All keys are the same size, which makes it possible to access them without deserialisation. In this example, it is 0x00000020, which 32, meaning that all keys are 32 bytes long.
  3. Keys themselves. In our examples, these are the coloured boxes before the streak of white 0s. Keys are sorted lexicographically. This, together with the keys being the same size, allows binary search without deserialisation, as well as linear-time merge of multiple changesets.
  4. Value offsets. These offsets mark the beginning of the next, 5th part as offset 0. First value has offset 0. In our example, all values are empty strings, therefore we see 3 zero offsets (24 white boxes with zeros in them).
  5. Values themselves. In our example, they are empty, so this 5th part is not present.

Tables "HashedState" and "IntermediateTrieHashes"

These tables are used to calculate Merkle Trie root hash of whole current state. For Genesis block, these tables are not populated, because the root hash is known in advance.

Block with 1 Ethereum transaction in Erigon

The first block contains transaction that transfers 0.001 ETH from the account holding 9 ETH to a new account with the address 0x0100000000000000000000000000000000000000 (this is what one gets specifying common.Address{1} in the code). This is how the state trie after Block 1 is inserted looks like:

block1_state

First thing to note about the illustration of the state trie is that the nonce of the first account is now 1 since a transaction from that address has been executed and the amount of ETH of that account is now 8.999 since the transaction had a value of 0.001 ETH. Usually, the transaction fee would also be paid, but in our simplified example, we set gas price to 0, therefore no fees are deducted. A new account has been added to the state trie, the recipient of the transaction. In fact, it has 0.001 ETH (the value of the transaction) and its nonce is set to 0. What follows are excerpts from the Erigon database after block 1 has been inserted. These excerpts only show the records that have changed, and omit the records that are the same as before the insertion of the block.

block1_db

Table "Receipts"

Table Receipts now has some non-empty information for the block 1, because we had 1 transaction:

block1_db_receipts

The first 8 bytes of the key (or 16 nibbles, 15 zeroes followed by 1) encode the block number, which is 1. Receipt records are only kept for "canonical" blocks, and not for forked blocks, that is why receipt keys do not include 32-byte block hash.

The value is the CBOR-encoded list of receipts. In our case, a transaction was sent and as a matter of fact, instead of having 0xC0 (that represent an empty list) we have 0xc6c501825208c0 that is the receipt for the 0.001 ETH transaction. First prefix, c6 means that the following 6 bytes is a sequence of RLP-encoded sub-structures. In our case, there is only one sub-structure, and its prefix c5 means that the following 5 bytes is a sequence of RLP-encoded sub-structures. There are 3 of them: 01, 825208, and c0. The first encodes number 1, which means the "Success" status of the transaction (0 would mean failure). Next, we have a byte array of length 2 (prefix 82), 5208, which is 21000 in hexadecimal, the cumulative gas used by all transactions so far. And the last structure, c0 is RLP encoding of an empty list. Usually, the log (events) emitted by the transaction, would be here. But since our transaction did not emit anything, the list is empty.

Table "Senders"

block1_db_senders The reason Erigon keeps the list of transaction sender addresses for each transaction has to do with the fact that transactions themselves do not contain this information directly. Sender's address can be "recovered" from the digital signature, but this recovery can be computationally intensive, therefore we "memoise" it.

Table "History Of Accounts"

block1_db_history_of_accounts

The first entry has a non-empty value. This is the sender of 0.001 ETH. As history bucket records the value of this account before the change, we should expect the same value here as this account had at the Genesis. The other two records contain empty values, which means these account were non-existent previously. These are the account of the recipient of 0.001 ETH (0x0100000000000000000000000000000000000000), and the miner account 0x0000000000000000000000000000000000000000. The keys of all three records have the common suffix of 0x21 instead of 0x20, which is simply encoding of the block number 1 instead of block number 0.

WARNING We are planning a change, called THIN_HISTORY, after which the bucket "History of Accounts" will not store the values of the accounts, but only the block numbers when those accounts changed.

Next bucket is "Headers"

block1_db_headers

A new header has been generated since a new block has been mined. As a matter of fact, the keys for the first two records start with a block number of 1 followed by the block hash (or header hash, which is the same thing) that is different than the Genesis block. Additionally, these two records for the new block that respectively represent the values in the headers and the mining difficulty differs from the Genesis Block.

Next bucket is "Block Bodies":

block1_db_block_bodies

The keys in this bucket are concatenations of 8-byte encoding of the block number and 32-byte block hash. The new record is the representation of block 1.

block1_db_change_sets

Bucket "Change Sets" recorded the change in account that occurred before the 0.001 ETH transaction. You can notice that unlike the Genesis block, this time the key has a prefix of 0x21 since now the blockchain is 1 block apart from the Genesis block. Like in the ChangeSet in the Genesis block, there are 3 new records. But unlike the ChangeSet in the genesis block, one of the records (the last one) has a non-empty value.

The next bucket is "PlainState":

block1_db_accounts

The values are the current state of each account.

  • The first record has a field set of 0x3 (11) meaning that this time the account has a nonce as well. The nonce length is 0x01, therefore the nonce is stored in the byte immediately after the length of the field: 0x01. The balance is now changed to 0x7ce2ded23dbd8000. The value 0x7ce2ded23dbd8000 is the hexadecimal value for:
$ python
Python 2.7.15
Type "help", "copyright", "credits" or "license" for more information.
>>> 0x7ce2ded23dbd8000
8999000000000000000

Which is 9 ETH - 0.001 ETH, this means that this account is the sender.

  • in the second value the field set is 0x02 meaning that only the balance is set. The value 0x1bc16d674ec80000 (balance) is the hexadecimal value for:
$ python
Python 2.7.15
Type "help", "copyright", "credits" or "license" for more information.
>>> 0x1bc16d674ec80000
2000000000000000000

Which is 2 ETH that probably represent the mining reward.

  • in the third value we have prefix 0x06 (110), meaning that only balance and incarnation are set. the balance is now 0x038d7ea4c68000 .Start python and do this:
$ python
Python 2.7.15
Type "help", "copyright", "credits" or "license" for more information.
>>> 0x038d7ea4c68000
1000000000000000

Which is 0.001 ETH that is exactly how much has been sent to the recipient address, meaning that this account represent the recipient of the transaction.

Because Erigon does it completely different from go-ethereum, we created dedicated article for it.

Genesis in go-ethereum

Now we will create the same Genesis state and block in go-ethereum (in archive mode to make sure we compare like for like). Here is how the database looks like. Since go-ethereum uses LevelDB, and LevelDB does not have a concept of "buckets" (or "tables"), go-ethereum emulates them by adding table-specific prefixes to all the keys, with the exception of the keys that describe the state trie (bucket "Hashes" in our example). In the illustration, these prefixes are mostly removed for better comparison with Erigon. They were not removed only for the buckets "LastBlock", "LastHeader" and "LastFast", because otherwise they key would be empty.

geth_genesis_db

The buckets "Headers", "Config", "Last Header", "Last Fast", "Last Block", all look identical to those in the Erigon database. We will walk through the ones that are different.

In the bucket "Block Bodies", the value is slightly different:

geth_genesis_block_bodies

The difference is that the block body has 2 elements instead of 3 in Erigon. The missing element is the list of the sender addresses that go-ethereum does not store, but recomputes after loading or caches in memory.

The buckets "Accounts", "History Of Accounts", and "Change Sets" are missing, because go-ethereum uses a very different mechanism for storing the state and its history:

geth_genesis_hashes

In the illustration showing the state trie, one can find 4 parts of the diagram that consist of the coloured boxes (that excludes the leaves that contain account balances and nonces). These parts are usually called "trie nodes", and in the diagram above we see 2 types of trie nodes:

  1. Branch node. This is the horizontal line of 3 coloured boxes on the top. It branches the traversal of the state trie from top to bottom 3-ways.
  2. Leaf node. These are 3 vertical lines of 63 coloured boxes.

Each type of trie nodes can be serialised (using RLP encoding), to convert it to a string of bytes. What we see in the values of the records in the "Hashes" bucket just above are the RLP-encodings of these 4 trie nodes. What we see in the keys of these records are the results of Keccak256 function applied to the values. In a way, this is similar to the "Preimages" bucket, with the different type of values.

If you look closely, you may notice that the keys of the last 3 records are actually contained inside the value of the first record. This is because the first value corresponds to that 3-way branch node, and the hashes of the leaf nodes are used like "pointers" to those nodes. Continuing the "pointer" analogy, you can say that "dereferencing" these pointers mean fetching the corresponding records from this "Hashes" bucket. Using such "derederencing" process, one can traverse the state trie from the top to any leaf at the bottom. Each step in such traversal requires finding the corresponding record in the "Hashes" bucket.

Block 1 in go-ethereum

Now we will create the same Transaction for go-ethereum.

geth_block1_db

The buckets "Receipts", "Headers", "Config", "Last Header", "Last Fast", "Last Block", all look identical to those in the Erigon database. We will walk through the ones that are different.

In the bucket "Block Bodies", the value is slightly different:

geth_block1_block_bodies

The difference is that the block body is missing the sender address since the send in go-ethereum is computed and in Erigon is stored. For the rest in this case the same changes occurs in terms of block number and block hash.

geth_block1_hashes

First of all a new branch node has been generated for the block. That's the first record because it contains in its value the key of the other key records. The three leaf nodes contains the Keccak256 of the change in states of the account of the recipient, sender and miner of the block.