Adding Ethernet to an STM32 design

[ITstreet1]

Hi guys,

Can anyone explain to me a thing or two how to add an Ethernet to an STM32 IC? Specifically the STM32F407VGT6.
According to the DS, this IC has an Ethernet.
https://datasheet.lcsc.com/lcsc/2304140030_STMicroelectronics-STM32F407VGT6_C12345.pdf

I have never designed an STM32 with Ethernet, so I need some guidance. I did design it with the W5500.

One more. Can this STM32 with Ethernet be programmed with the Arduino IDE? If so, what lib?
Some light here would be nice.

[fpistm]

Hi @ITstreet1
Never do this too.
You can probably have a look to some schematics. Example the one for Nucleo 144 F429ZI.

Note that you will need an externa PHY as stated in the product specification:

About the library:
https://github.com/stm32duino/STM32Ethernet

[fpistm]

Closed this one as linked to https://github.com/orgs/stm32duino/discussions/2197