Artillery.ini

###############
# AUTHOR: Szabolcs Hornyak / design85@gmail.com
# https://szabolcs.eu/2020/12/29/prusaslicer-sw-x1-genius/
# Tested with PrusaSlicer 2.2, 2.3
###############

# Print profiles for the Artillery printers.

[vendor]
# Vendor name will be shown by the Config Wizard.
name = Artillery
# Configuration version of this file. Config file will only be installed, if the config_version differs.
# This means, the server may force the PrusaSlicer configuration to be downgraded.
config_version = 0.0.6-slic3r
# Where to get the updates from?
config_update_url = 
#https://files.prusa3d.com/wp-content/uploads/repository/PrusaSlicer-settings-master/live/Artillery/
# changelog_url = https://files.prusa3d.com/?latest=slicer-profiles&lng=%1%

# The printer models will be shown by the Configuration Wizard in this order,
# also the first model installed & the first nozzle installed will be activated after install.
# Printer model name will be shown by the installation wizard.

#############
## PRINTER ##
#############

[printer_model:X1]
name = Artillery Sidewinder X1
variants = 0.4
technology = FFF
bed_model = bed-x1.stl
bed_texture = bed-x1.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

[printer_model:Genius]
name = Artillery Genius
variants = 0.4
technology = FFF
bed_model = bed-genius.stl
bed_texture = bed-genius.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

[printer_model:Hornet]
name = Artillery Hornet
variants = 0.4
technology = FFF
bed_model = bed-hornet.stl
bed_texture = bed-hornet.png
default_materials = Generic PLA @Artillery; Generic ABS @Artillery; Generic PETG @Artillery; Generic TPU @Artillery

# Common printer preset
[printer:*common*]
before_layer_gcode = ;BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0
between_objects_gcode = 
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_filament_profile = Generic PLA @Artillery
default_print_profile = 0.20mm NORMAL @Artillery
deretract_speed = 0
extruder_colour = #FFFF00
extruder_offset = 0x0
gcode_flavor = marlin
layer_gcode = ;AFTER_LAYER_CHANGE\n;[layer_z]
machine_max_acceleration_e = 5000,5000
machine_max_acceleration_extruding = 1250,1250
machine_max_acceleration_retracting = 1250,1250
machine_max_acceleration_x = 1000,960
machine_max_acceleration_y = 1000,960
machine_max_acceleration_z = 1000,1000
machine_max_feedrate_e = 120,120
machine_max_feedrate_x = 200,100
machine_max_feedrate_y = 200,100
machine_max_feedrate_z = 12,12
machine_max_jerk_e = 1.5,1.5
machine_max_jerk_x = 8,8
machine_max_jerk_y = 8,8
machine_max_jerk_z = 0.4,0.4
machine_min_extruding_rate = 0,0
machine_min_travel_rate = 0,0
max_layer_height = 0.32
max_print_height = 250
min_layer_height = 0.07
nozzle_diameter = 0.4
pause_print_gcode = 
printer_technology = FFF
remaining_times = 0
retract_before_travel = 1
retract_before_wipe = 0%
retract_layer_change = 1
retract_length = 1.9
retract_length_toolchange = 4
retract_lift = 0.6
retract_lift_above = 0
retract_lift_below = 380
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 35
silent_mode = 0
single_extruder_multi_material = 0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
end_gcode = G4 ; wait\nG92 E0 ; prepare to retract\nG1 E-0.5 F3000; retract to avoid stringing\n\n; Anti-stringing end wiggle\nG91 ; use relative coordinates\nG1 X1 Y1 F1200\n\n; Raise nozzle and present bed\n{if layer_z < max_print_height}G1 Z{z_offset+min(layer_z+120, max_print_height)}{endif} ; Move print head up\nG90 ; use absolute coordinates\n\n; Reset print setting overrides\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Shut down printer\nM106 S0 ; turn-off fan\nM104 S0 ; turn-off hotend\nM140 S0 ; turn-off bed\nM150 P0 ; turn off led\nM85 S0 ; deactivate idle timeout\nM84 ; disable motors\n

[printer:*common_STOCK_FW*]
inherits = *common*
start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature] ; wait for bed to heat up\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}

[printer:*common_UPD_FW*]
inherits = *common*
start_gcode = ; Initial setups\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM900 K0.12; K factor\nM900 W[extrusion_width] H[layer_height] D[filament_diameter]\nM200 D0 ; disable volumetric e\nM220 S100 ; reset speed factor to 100%\nM221 S100 ; reset extrusion rate to 100%\n\n; Set the heating\nM190 S[first_layer_bed_temperature]; wait for bed to heat up\nM104 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]}; start nozzle heating but don't wait\n\n; Home\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG28 ; home all axes\nG1 X3 Y3 F5000 ; move to corner of the bed to avoid ooze over centre\n\n; Wait for final heating\nM109 S{first_layer_temperature[initial_extruder]+extruder_temperature_offset[initial_extruder]} ; wait for the nozzle to heat up\nM190 S[first_layer_bed_temperature] ; wait for the bed to heat up\n\n;Auto bed Leveling\n@BEDLEVELVISUALIZER\nG29 ; ABL T\nM420 S1 Z3 ; reload and fade mesh bed leveling until it reach 3mm Z\n\n; Return to prime position, Prime line routine\nG92 E0 ; Reset Extruder\nG1 Z3 F3000 ; move z up little to prevent scratching of surface\nG1 X10 Y.5 Z0.25 F5000.0 ; Move to start position\nG1 X100 Y.5 Z0.25 F1500.0 E15 ; Draw the first line\nG1 X100 Y.2 Z0.25 F5000.0 ; Move to side a little\nG1 X10 Y.2 Z0.25 F1500.0 E30 ; Draw the second line\nG92 E0 ; Reset Extruder\nM221 S{if layer_height<0.075}100{else}95{endif}

[printer:*bowden*]
inherits = *common_STOCK_FW*
retract_length = 5
retract_lift = 0.1
retract_before_wipe = 50%
default_filament_profile = Generic PLA @Artillery

[printer:*0.2nozzle*]
nozzle_diameter = 0.2
max_layer_height = 0.16
min_layer_height = 0.04
printer_variant = 0.2
default_print_profile = 0.12mm DETAIL @Artillery

[printer:*0.3nozzle*]
nozzle_diameter = 0.3
max_layer_height = 0.24
min_layer_height = 0.04
printer_variant = 0.3
default_print_profile = 0.16mm OPTIMAL @Artillery

[printer:*0.4nozzle*]
nozzle_diameter = 0.4
max_layer_height = 0.32
min_layer_height = 0.04
printer_variant = 0.4
default_print_profile = 0.20mm NORMAL @Artillery

[printer:*0.5nozzle*]
nozzle_diameter = 0.5
max_layer_height = 0.4
min_layer_height = 0.04
printer_variant = 0.5
default_print_profile = 0.24mm DRAFT @Artillery

[printer:*0.6nozzle*]
nozzle_diameter = 0.6
max_layer_height = 0.48
min_layer_height = 0.08
printer_variant = 0.6
default_print_profile = 0.32mm NORMAL 0.6 nozzle

[printer:*0.8nozzle*]
nozzle_diameter = 0.8
max_layer_height = 0.64
min_layer_height = 0.08
printer_variant = 0.8
default_print_profile = 0.32mm NORMAL 0.8 nozzle

[printer:Artillery Sidewinder X1]
inherits = *common_STOCK_FW*
renamed_from = "Sidewinder X1"
printer_model = X1
printer_variant = 0.4
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1

[printer:Artillery Sidewinder X1 BL-TOUCH]
inherits = *common_UPD_FW*
renamed_from = "Sidewinder X1 BL-TOUCH"
printer_model = X1
printer_variant = 0.4
bed_shape = 0x0,300x0,300x300,0x300
max_print_height = 400
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_X1

[printer:Artillery Genius]
inherits = *common_STOCK_FW*
renamed_from = "Genius"
printer_model = Genius
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius

[printer:Artillery Genius BL-TOUCH]
inherits = *common_UPD_FW*
renamed_from = "Genius BL-TOUCH"
printer_model = Genius
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Genius

[printer:Artillery Hornet]
inherits = *bowden*
renamed_from = "Hornet"
printer_model = Hornet
printer_variant = 0.4
bed_shape = 0x0,220x0,220x220,0x220
max_print_height = 250
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_Artillery\nPRINTER_MODEL_Hornet\nPRINTER_HAS_Bowden

###########
## PRINT ##
###########
# Common print preset
[print:*common*]
# V2.2 #
#bottom_fill_pattern = rectilinear
#top_fill_pattern = rectilinear
#fill_pattern = cubic
# V2.3 #
top_fill_pattern = monotonic
bottom_fill_pattern = monotonic
fill_pattern = adaptivecubic

avoid_crossing_perimeters = 0
bridge_acceleration = 1000
bridge_angle = 0
bridge_flow_ratio = 78%
bridge_speed = 20
# brim_width = 5
bottom_solid_min_thickness = 1.2
clip_multipart_objects = 1
compatible_printers = 
complete_objects = 0
default_acceleration = 1000
dont_support_bridges = 1
ensure_vertical_shell_thickness = 1
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 25
external_perimeters_first = 0
extra_perimeters = 0
extruder_clearance_height = 25
extruder_clearance_radius = 45
extrusion_width = 0.45
fill_angle = 45
fill_density = 15%
first_layer_acceleration = 500
first_layer_extrusion_width = 0.42
first_layer_height = 50%
first_layer_speed = 20
first_layer_min_speed = 20
first_layer_infill_speed = 20
gap_fill_speed = 30
gcode_comments = 1
gcode_label_objects = 1
infill_acceleration = 1000
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 150
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs_width_speed = 40%
overhangs_width = 80%
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{layer_height}mm_{filament_type[0]}_{printer_model}_{print_time}.gcode
perimeters = 3
perimeter_acceleration = 800
perimeter_extruder = 1
perimeter_extrusion_width = 0
perimeter_speed = 45
post_process = 
print_settings_id = 
raft_layers = 0
seam_position = cost
seam_angle_cost = 30%
seam_travel_cost = 70%
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 6
skirt_height = 1
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 50
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance_type = filament
support_material_contact_distance_top = 0.15
support_material_contact_distance_bottom = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_synchronize_layers = 0
support_material_threshold = 55
support_material_with_sheath = 0
support_material_xy_spacing = 50%
thin_walls = 1
travel_speed = 130
top_infill_extrusion_width = 0.4
top_solid_infill_speed = 30
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 125
xy_size_compensation = 0
extrusion_spacing =
perimeter_extrusion_spacing =
external_perimeter_extrusion_spacing =
first_layer_extrusion_spacing =
infill_extrusion_spacing =
solid_infill_extrusion_spacing =
top_infill_extrusion_spacing =

[print:*0.08mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.08
perimeters = 3
bottom_solid_layers = 9
top_solid_layers = 11

[print:*0.10mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.1
perimeters = 3
bottom_solid_layers = 7
top_solid_layers = 9

[print:*0.12mm*]
inherits = *common*
default_acceleration = 500
layer_height = 0.12
perimeters = 3
bottom_solid_layers = 6
top_solid_layers = 7

[print:*0.16mm*]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7

[print:*0.20mm*]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:*0.24mm*]
inherits = *common*
layer_height = 0.24
top_infill_extrusion_width = 0.45
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.28mm*]
inherits = *common*
layer_height = 0.28
top_infill_extrusion_width = 0.45
first_layer_extrusion_width = 0.75
bottom_solid_layers = 3
top_solid_layers = 4

[print:*0.32mm*]
inherits = *common*
layer_height = 0.32
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.08mm SUPERDETAIL @Artillery]
inherits = *0.08mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.10mm HIGHDETAIL @Artillery]
inherits = *0.10mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.12mm DETAIL @Artillery]
inherits = *0.12mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.16mm OPTIMAL @Artillery]
inherits = *0.16mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm SLOW @Artillery]
inherits = *0.20mm*
external_perimeter_speed = 15
fill_density = 20%
gap_fill_speed = 25
infill_speed = 50
perimeter_speed = 30
perimeters = 3
solid_infill_speed = 50
top_solid_infill_speed = 25
first_layer_speed = 15
first_layer_min_speed = 15
first_layer_infill_speed = 15
travel_speed = 100
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm NORMAL @Artillery]
inherits = *0.20mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.20mm SPEED @Artillery]
inherits = *0.20mm*
external_perimeter_speed = 35
fill_density = 15%
fill_pattern = grid
gap_fill_speed = 45
infill_speed = 150
infill_only_where_needed = 1
perimeter_speed = 60
perimeters = 2
solid_infill_speed = 150
top_solid_infill_speed = 50
travel_speed = 170
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.24mm DRAFT @Artillery]
inherits = *0.24mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

[print:0.28mm SUPERDRAFT @Artillery]
inherits = *0.28mm*
compatible_printers_condition = printer_model=~/(X1|Genius|Hornet).*/ and nozzle_diameter[0]==0.4

###############
## FILAMENTS ##
###############

# Common filament preset
[filament:*common*]
cooling = 1
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 15
compatible_printers_condition = printer_notes=~/.*PRINTER_VENDOR_Artillery.*/

[filament:*PLA*]
inherits = *common*
bed_temperature = 60
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 1
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #428AF5
filament_cost = 20
filament_density = 1.24
filament_max_volumetric_speed = 15
filament_type = PLA
first_layer_bed_temperature = 65
first_layer_temperature = 210
full_fan_speed_layer = 3
max_fan_speed = 100
min_fan_speed = 100
temperature = 205

[filament:*PET*]
inherits = *common*
bed_temperature = 70
bridge_fan_speed = 100
cooling = 1
disable_fan_first_layers = 3
fan_always_on = 1
fan_below_layer_time = 20
filament_colour = #42E9F5
filament_cost = 30
filament_density = 1.27
filament_max_volumetric_speed = 8
filament_type = PETG
first_layer_bed_temperature = 70
first_layer_temperature = 235
max_fan_speed = 50
min_fan_speed = 20
temperature = 230

[filament:*ABS*]
inherits = *common*
bed_temperature = 90
bridge_fan_speed = 30
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #6603FC
filament_cost = 20
filament_density = 1.04
filament_max_volumetric_speed = 11
filament_type = ABS
first_layer_bed_temperature = 90
first_layer_temperature = 240
max_fan_speed = 0
min_fan_speed = 0
temperature = 240
top_fan_speed = 0

[filament:*TPU*]
inherits = *common*
bed_temperature = 55
cooling = 0
disable_fan_first_layers = 3
fan_always_on = 0
fan_below_layer_time = 20
filament_colour = #CFFFFB
filament_cost = 30
filament_density = 1.2
filament_max_volumetric_speed = 11
filament_retract_before_travel = 4
filament_retract_length = 2.5
filament_retract_speed = 30
filament_type = TPU
first_layer_bed_temperature = 55
first_layer_temperature = 210
max_fan_speed = 70
min_fan_speed = 0

[filament:Generic PLA @Artillery]
inherits = *PLA*
filament_vendor = Generic

[filament:Generic PETG @Artillery]
inherits = *PET*
filament_vendor = Generic

[filament:Generic ABS @Artillery]
inherits = *ABS*
filament_vendor = Generic

[filament:Generic TPU @Artillery]
inherits = *TPU*
filament_vendor = Generic