Skip to content
This repository has been archived by the owner on Mar 30, 2022. It is now read-only.

MOCPOC: Packstack Openstack Install (on Centos) experiment: vms

Jump to bottom
AMohn9 edited this page Jun 7, 2013 · 6 revisions

Controller on VM, Compute on PXE booted ramdisk hardware (from now on, these machines will be referred to as the BORG). (VAL+ANDREW)

Did

Created a VM with public and private nic to be the controller node.

$ sudo yum install -y http://rdo.fedorapeople.org/openstack/openstack-grizzly/rdo-release-grizzly-3.noarch.rpm
$ sudo yum install -y openstack-packstack

Ran packstack --allinone, rebooted, edited the answer file create by --allinone

  • set CONFIG_CINDER_INSTALL and CONFIG_SWIFT_INSTALL to n
  • CONFIG_NOVA_COMPUTE_HOSTS=192.168.3.3 (the ip address of one member of the BORG)
  • and, appropriately, CONFIG_NOVA_COMPUTE_PRIVIF=eth0
  • we also set CONFIG_NOVA_NETWORK_PRIVIF=eth1 and CONFIG_NOVA_NETWORK_PUBIF=eth2, although these a nova-network variables.
  • we left all quantum configurations as is:
    • CONFIG_QUANTUM_SERVER_HOST=128.197.44.248 The IP addresses of the server on which to install the Quantum server
    • CONFIG_QUANTUM_USE_NAMESPACES=y Enable network namespaces for Quantum
    • CONFIG_QUANTUM_L3_HOSTS=128.197.44.248 A comma separated list of IP addresses on which to install Quantum L3 agent
    • CONFIG_QUANTUM_L3_EXT_BRIDGE=br-ex The name of the bridge that the Quantum L3 agent will use for external traffic
    • CONFIG_QUANTUM_DHCP_HOSTS=128.197.44.248 A comma separated list of IP addresses on which to install Quantum DHCP plugin
    • CONFIG_QUANTUM_L2_PLUGIN=openvswitch The name of the L2 plugin to be used with Quantum
    • CONFIG_QUANTUM_METADATA_HOSTS=128.197.44.248 A comma separated list of IP addresses on which to install Quantum metadata agent
    • CONFIG_QUANTUM_LB_TENANT_NETWORK_TYPE=local The type of network to allocate for tenant networks
    • CONFIG_QUANTUM_LB_VLAN_RANGES= A comma separated list of VLAN ranges for the Quantum linuxbridge plugin
    • CONFIG_QUANTUM_LB_INTERFACE_MAPPINGS= A comma separated list of interface mappings for the Quantum linuxbridge plugin
    • CONFIG_QUANTUM_OVS_TENANT_NETWORK_TYPE=local Type of network to allocate for tenant networks
    • CONFIG_QUANTUM_OVS_VLAN_RANGES= A comma separated list of VLAN ranges for the Quantum openvswitch plugin
    • CONFIG_QUANTUM_OVS_BRIDGE_MAPPINGS= A comma separated list of bridge mappings for the Quantum openvswitch plugin

When running packstack with the edit answer file, and we ran into!

Problems!

  1. Horizon did not work immediately after making new project. Continues to have error "unable to retrieve quota information". This is fixed by logging out and logging back in.

  2. First notable problem: packstack stalled in state Testing if puppet apply is finished : 192.168.3.3_quantum.pp for >12 hours.

  3. after crtl-c-ing the install, we got the message Kernel package with netns support has been installed on host 192.168.3.89. Please note that with this action you are loosing Red Hat support for this host. Because of the kernel update host mentioned above requires reboot.

  • BUT! we cannot reboot the BORG machines

  1. the BORG machine wrote Message from syslogd@moc-compute-03 at Jun 6 13:15:28 ... kernel:journal commit I/O error to stdout at the time of the second packstack run.

  2. We noticed the time is wrong on our compute machine

  • FIXED: reboot with ntp on of the BORG
  • this particular solution had not effect on the part (1) or part (2) above.

Now trying, packstack w/out Quantum!

How to:

  1. get repos and yum install openstack-packstack (here: http://openstack.redhat.com/Quickstart)
  2. run packstack --gen-answer-file=~/answers.cfg
  3. edit answer file. See the ans.txt file save in the github (all passwords set to "GEN")"https://github.com/CCI-MOC/moc-public/blob/master/packstack/ans.txt

Problems:

When using a BORG machine, we had to manually start libvirt and messagebus and openstack-nova compute. We then get this error printed to stdout: Message from syslogd@moc-compute-03 at Jun 6 13:15:28 ...kernel:journal commit I/O error

Problem with squash nfs?

Now trying physical machine for compute, instead of BORG!

After restating libvirt, messagebus and openstack-nova-compute, can boot machines!

Notes on NOT using quantum:
  • Default nova network settings: FlatDHCP server with multi_host=false (the default setting of multi_host -- variable not set in /etc/nova/nova.conf). THIS IS PERFECT, as out BORG nodes only have 1 NIC

Home
People
Getting Started
Archive

Clone this wiki locally