v.0.9.4. Audit check for Vocera (beta), multiple new checks, and fixes

Features

• Added rogue rule parsing, needed on some of the new checks
• Added Client types table in XLS report

New Checks:

• 240024: For Guest/webauth WLANs, it is advisable to enable Peer to Peer blocking. WLAN(s): {0}
• 240025: For Guest/webauth WLANs, it is advisable to enable Peer to Peer blocking. WLAN(s): {0}
• 240026: For Guest/webauth WLANs, it is to set the Policy Profile QoS to Bronze. WLAN(s)/Policy: {0}
• 230091: It is recommended to use either radius or tacacs+ as part of the default login method"
• 230092: Rogue detection should be configured to report on AdHoc Rogue Access Points
• 230093: Excessive 802.11 association failures client exclusion policies should be enabled in WPS policies
• 230094: Excessive 802.1x authentication failures client exclusion policies should be enabled in WPS policies
• 230095: IP Theft failures client exclusion policies should be enabled in WPS policies
• 230096: Excessive webauth authentication failures client exclusion policies should be enabled in WPS policies
• 230097: SNMPv2 community string detected, it is advisable to move to SNMPv3 with authentication and privacy if supported by management software
• 230098: SNMPv1 trap destination detected, it is advisable to move to SNMPv3 with authentication and privacy if supported by destination
• 270002: Mesh full sector DFS should be enabled. Mesh profiles: {0}

Fixes

• AireOS WLAN export shows load balancing as always enabled
• MacOS build not generating Graph export

v.0.9.3. Fixes + HW reports

Features

• Removed non used dependencies when running on CLI mode
• 9800: Hardware State (environment) and Resources reports added
• Windows: you can pass parameter "-i" with a filename, to be processed automatically, without GUI

Fixes

• AP tag parsing error (high CPU) due to corrupted lines
• Exception while parsing radius dead criteria
• Error parsing negative TX power
• Exception if AireOS MSS value was set to invalid number

v.0.9.1. 6GHz support, 17.7, new checks and fixes

Features

• Support for 17.7
• Support for 6GHz
• 9800: WLAN QOS column now includes AVC status
• Controller tab: added display of Fast SSID status, Time source/zone, country list
• Small speed optimization of file parsing (section detection)
• Updated recommended codes for AireOS/9800
• Added AP Interface stats table for 17.7 and higher
• Two new checks: Warn if AP has interface on half duplex or in 100mbps. Needs 17.7 or higher

Fixes

• GUI tool was duplicating feature nanmes in check reports
• WLAN: header had swapped session timeout and local EAP columns
• Controller tab: group info was not displayed properly
• 2.4 Rates parsing error is 11g is disabled
• Exception in drager client audit

v.0.9.0. Spectralink client audit, Rogue summarization per channel

Features

• Added Rogue count per area (sites/flex) in channel stat pages
• Spectralink Client Audit

Fixes

• Drager audit error on some scenarios
• Checks had duplicated feature text
• Coloring rules error for AP RF summary

v.0.8.7. RF Graph generation

This release is only for Desktop version, as it introduces a graph analysis procedure, using external visualization tools
This is a “very” experimental option… so please feel free to share your thoughts and ideas about it

Check details here:
https://developer.cisco.com/docs/wireless-troubleshooting-tools/#!rf-graph-analysis-using-wcae-desktop-and-gephi

Changes October 22nd

Features

• New check 230086 to warn about invalid legacy country codes in use for Japan
• Graph export for RF analysis in Desktop version

Fixes

• Disabled lxml unused library
• Fixed wrong controller time in feature report
• 9800: Fixed incorrect feature report for AP dot1x usage
• 9800: removed duplicate web_consent field on feature report

v.0.8.6. New checks + debug bundle support + fixes.

Features

• Added AP ID to the AP config table
• New check for URL filtering, validating if wildcards are used in the middle of URL
• Added support for 9800 debug bundle (tar.gz) containing a "show tech wireless"
• 9800: New check to recommend AP tag persistency command on 17.6 and higher
• 9800: New check with info message if max-user-login feature is in use
• 9800: New check to recommend port-channel load-balance src-dst-mixed-ip-port, if lag is in use
• Moved checks links in XLS report for visibility

Fixes

• Moved check 20010 from info to warning
• Corrected version check failure for 20039. it is now properly filtered for 9800
• Corrected invalid default timer value for NDP
• 230060 and 230061 are now filtered, if the policy profile using the interface on disabled state
• Fixed version verification for c9105
• Corrected false positive on 300001

v.0.8.5 Fixes and new optional RRM changes

Changes September 2nd

Features

• Added RRM RF Neighborhood calculation (only for desktop version, click on RRM report option)
• Added TX Neighbor information to XLS report

Fixes

• Adjusted dark blue color on XLS export for readability
• Prevents exception on XLS export for missing interface data
• Fixed Manual power count in XLS report
• Corrected colors in XLS export
• Fixed error while checking policy tags
• Fixed parsing error of clock timestamp if it started by a period
• Corrected false 250019 event if vlan name had trailing space in 16.x configuration
• Fixed incorrect handling of incomplete 9800 AP commands
• Missing handling of 1562i for IOS-XE upgrade version check

v. 0.8.3. new 10 check types, and 7 fixes

Features

• 9800:Added checks to validate the last run time for RRM algorithms (DCA, TPC, BSS, Grouping). Warning will be displayed if the last run time on the algorithm leader controller exceeds the configured interval
• AireOS/9800: Generate warning message with all AP with radios on operational down state
• 9800: Two new high availability checks, recommend to use RMI as best practices, and if RMI is configured, warn if redundancy state has any failures
• 9800: Warn if there are NSMP servers configured on down state
• 9800: Warn if a mobility peer is on down state
• 9800: Warn if Export anchor is enabled on policy profile, and this is used for a tag with APs assigned. This combination will prevent WLANs to be broadcasted
• 9800: Ported over RF profile checks at controller level (60008-60032)
• AireOS/9800: New check to report if AP radio slot has Air Quality average index, below 60%
• AireOS/9800: New checks to warn if CCKM and FT are enabled on a WLAN. This may cause client connection issues
• 9800: Warns if OEAP Provisioning SSID has been left enabled, this is cross check between Flex profile on OEAP mode, and site tag/AP join profile

Fixes

• False positive on 250005 subscriber error, due to 'BUILTIN_AUTOCONF_POLICY'
• False positive if RLANs are in use for 230069 and 230070
• Duplicated 10025
• Corrected message 230041 for clarity (VLAN)
• Corrected error parsing RLAN in policy tags
• Added new type of message: operational, to indicate issues coming from state data, like memory levels, temperature, RF levels, etc
• Fixed channel change count not displayed in XLS report

v. 0.8.1 Minor fixes

Fixes

• False positive on 250005 subscriber error, due to 'BUILTIN_AUTOCONF_POLICY'
• False positive if RLANs are in use for 230069 and 230070
• Duplicated 10025 on some corrupted file types

V. 0.8.0. Upgrade Advisor, Flex and H2.0 checks, and more

Features

• Upgrade Advisor: Evaluates AP and controller models, and proposes upgrade options and path towards recommended code versions
• Added check in case HTTP modules have been disabled (impact if upgrading to 17.3 and higher)
• New syslog checks for AP profile: warn if facility is not Kernel, and recommend to change host from broadcast default
• IOS-XE: New Hotspot2.0 checks: validates anqp server name, that wlan has dot1x enabled, and that anqp server entry has at least one roaming-oi with beacon flag
• IOS-XE: if there are APs in flex mode, warns if there are any policies with central association enabled, and with central switching disabled, as unsupported combination

Fixes

• AP join profile checks are only applied to profiles with associated APs
• Updated signature 290003, now it is filtered out, if AP is running one of the fixed versions (CSCvi96066)
• AireOS: exception while parsing RLAN if local EAP was configured
• AireOS: added error reporting when file is partially corrupted
• Updated recommended releases
• Corrected exception while exporting to XLS very old releases
• Updated minimum recommended versions for IOS-XE
• XLS now reports properly if file could not be parsed
• Fixed XLS report failure for 16.10 controllers
• Internal: parser changes to accommodate special feature report
• AireOS: Fixed parsing when output it captured with DNAC