🔧 Move MMU section

Infobitas · May 17, 2023 · b2acd51 · b2acd51
1 parent 6d46a49
commit b2acd51
Showing 1 changed file with 18 additions and 18 deletions.
diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
@@ -242,24 +242,6 @@
   //#define SINGLENOZZLE_STANDBY_FAN
 #endif
 
-// @section multi-material
-
-/**
- * Multi-Material Unit
- * Set to one of these predefined models:
- *
- *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
- *   PRUSA_MMU2           : Průša MMU2
- *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
- *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
- *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
- *
- * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
- * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
- */
-//#define MMU_MODEL PRUSA_MMU2
-
 // A dual extruder that uses a single stepper motor
 //#define SWITCHING_EXTRUDER
 #if ENABLED(SWITCHING_EXTRUDER)
@@ -393,6 +375,24 @@
 //#define HOTEND_OFFSET_Y { 0.0, 5.00 }  // (mm) relative Y-offset for each nozzle
 //#define HOTEND_OFFSET_Z { 0.0, 0.00 }  // (mm) relative Z-offset for each nozzle
 
+// @section multi-material
+
+/**
+ * Multi-Material Unit
+ * Set to one of these predefined models:
+ *
+ *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
+ *   PRUSA_MMU2           : Průša MMU2
+ *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
+ *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
+ *
+ * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
+ * See additional options in Configuration_adv.h.
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ */
+//#define MMU_MODEL PRUSA_MMU2
+
 // @section psu control
 
 /**