🔧 Clarify axis disable / timeout

MarlinFirmware/Marlin#25571
MarlinFirmware · Mar 26, 2023 · e04cd53 · e04cd53
1 parent ac7195c
commit e04cd53
Show file tree

Hide file tree

Showing 649 changed files with 4,697 additions and 4,388 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -1717,8 +1717,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -1784,8 +1784,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1155,19 +1155,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -1785,8 +1785,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -1716,8 +1716,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion
 

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -1146,19 +1146,20 @@
 
 /**
  * Idle Stepper Shutdown
- * Enable DISABLE_INACTIVE_* to shut down axis steppers after an idle period.
- * The Deactive Time can be overridden with M18 and M84. Set to 0 for No Timeout.
+ * Enable DISABLE_IDLE_* to shut down axis steppers after an idle period.
+ * The default timeout duration can be overridden with M18 and M84. Set to 0 for No Timeout.
  */
-#define DEFAULT_STEPPER_DEACTIVE_TIME 120
-#define DISABLE_INACTIVE_X
-#define DISABLE_INACTIVE_Y
-#define DISABLE_INACTIVE_Z  // Disable if the nozzle could fall onto your printed part!
-//#define DISABLE_INACTIVE_I
-//#define DISABLE_INACTIVE_J
-//#define DISABLE_INACTIVE_K
-//#define DISABLE_INACTIVE_U
-//#define DISABLE_INACTIVE_V
-//#define DISABLE_INACTIVE_W
+#define DEFAULT_STEPPER_TIMEOUT_SEC 120
+#define DISABLE_IDLE_X
+#define DISABLE_IDLE_Y
+#define DISABLE_IDLE_Z    // Disable if the nozzle could fall onto your printed part!
+//#define DISABLE_IDLE_I
+//#define DISABLE_IDLE_J
+//#define DISABLE_IDLE_K
+//#define DISABLE_IDLE_U
+//#define DISABLE_IDLE_V
+//#define DISABLE_IDLE_W
+#define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
 #define DEFAULT_MINIMUMFEEDRATE             0.0     // (mm/s) Minimum feedrate. Set with M205 S.

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -1715,8 +1715,8 @@
 
 // @section extruder
 
-//#define DISABLE_E                 // Disable the extruder when not stepping
-#define DISABLE_INACTIVE_EXTRUDER   // Keep only the active extruder enabled
+//#define DISABLE_E               // Disable the extruder when not stepping
+#define DISABLE_OTHER_EXTRUDERS   // Keep only the active extruder enabled
 
 // @section motion