Non OpenESVE LCD

[samigroup]

Hello,
I am experiencing around with the OpenEVSE Plus Controller, I have added my available LCD 16X2, with pack module for I2C is there any way to update the I2C address without flashing the OpenEVSE controller code?
-- I know the LCD through the OpenEVSE is jumped A0-A2, so I soldered the A0-A2 jumpers to get the same address, but its not just that, its more, where its two different communication schemes. But its protected for throught the header files and headers, I was wondering if I can change the selection of LCD definition/I2C header through the RPI interface (wifi interface)

• I am not using the RTC, nor the Temperature, ( disabled them through wifi interface)

[samigroup]

If anyone was successful with this, it would be great if you can give me some pointers. Thanks!

[chris1howell]

To use a different LCD/Controller combo you will need to modify the source code to support your particular device and recompile.

…

On Sun, Aug 25, 2019, 9:10 PM Sami ***@***.***> wrote: If anyone was successful with this, it would be great if you can give me some pointers. Thanks! — You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub <#8?email_source=notifications&email_token=AAN5QH56TOUZNMXD5YR4BSDQGNJSPA5CNFSM4IKGFJPKYY3PNVWWK3TUL52HS4DFVREXG43VMVBW63LNMVXHJKTDN5WW2ZLOORPWSZGOD5DGQ3I#issuecomment-524707949>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AAN5QH7DAQAMILE5OHVKKTLQGNJSPANCNFSM4IKGFJPA> .

[samigroup]

Thanks Chris.