Can't compile and flash tasmota on m5stack atom lite

[Zarkstar]

I can't compile Tasmota correctly and I don't know if I am missing something.
What I did is:

1. downloading Tasmota Master (the same problem occurred with the development branch as well though)
2. configuring user_config_override.h to be able to use Tasmota Neopool
3. added to the end of platformio.ini the code required to see the m5stack environment:
   [env:m5stack-atoms3] platform = espressif32 board = m5stack-atoms3 upload_port = /dev/cu.usbserial-2552F4E512
4. I've selected the environment and launched the complier

It goes on for a bit until I get this message:

In file included from /Users/edo/Downloads/Tasmota-development/tasmota/tasmota.ino:24:
tasmota/include/tasmota_compat.h:23:10: fatal error: esp8266toEsp32.h: No such file or directory

Here's the complete log from terminal

` Executing task: platformio run --target upload --target monitor --environment m5stack-atoms3

Processing m5stack-atoms3 (platform: espressif32; board: m5stack-atoms3; framework: arduino)

Verbose mode can be enabled via -v, --verbose option
-DCONFIG_TASMOTA_FLASHMODE_QIO
*** use provided user_config_override.h as planned ***
*** use provided platformio_override.ini as planned ***
*** use provided platformio_tasmota_cenv.ini as planned ***
CONFIGURATION: https://docs.platformio.org/page/boards/espressif32/m5stack-atoms3.html
PLATFORM: Espressif 32 (2024.5.13) > M5Stack AtomS3
HARDWARE: ESP32S3 240MHz, 320KB RAM, 8MB Flash
DEBUG: Current (cmsis-dap) External (cmsis-dap, esp-bridge, esp-builtin, esp-prog, iot-bus-jtag, jlink, minimodule, olimex-arm-usb-ocd, olimex-arm-usb-ocd-h, olimex-arm-usb-tiny-h, olimex-jtag-tiny, tumpa)
PACKAGES:

• framework-arduinoespressif32 @ 3.0.0+sha.14a0ebd
• tool-esptoolpy @ 4.7.3
• tool-mkfatfs @ 2.0.1
• tool-mklittlefs @ 3.2.0
• tool-riscv32-esp-elf-gdb @ 12.1.0+20221002
• tool-xtensa-esp-elf-gdb @ 12.1.0+20221002
• toolchain-riscv32-esp @ 12.2.0+20230208
• toolchain-xtensa-esp32s3 @ 12.2.0+20230208
  Converting tasmota.ino
  LDF: Library Dependency Finder -> https://bit.ly/configure-pio-ldf
  LDF Modes: Finder ~ chain, Compatibility ~ strict
  Found 108 compatible libraries
  Scanning dependencies...
  Dependency Graph
  |-- Adafruit CCS811 Library @ 1.0.0
  |-- Adafruit MAX31865 library @ 1.0.1
  |-- Adafruit MCP9808 Library @ 1.1.2
  |-- Adafruit PM25 AQI Sensor @ 1.0.6
  |-- Adafruit SGP30 Sensor @ 1.2.0
  |-- Adafruit SGP40 Sensor @ 1.1.0
  |-- Adafruit VEML7700 Library @ 1.0.0
  |-- Adafruit seesaw Library @ 1.3.1
  |-- ESP8266Audio @ 1.9.5
  |-- BME8563
  |-- EEPROM 24C128_256_521
  |-- FFat @ 2.0.0
  |-- FS @ 2.0.0
  |-- I2Cdevlib-Core
  |-- LibTeleinfo @ 1.1.7
  |-- MPU6050 I2C
  |-- Mutichannel_Gas_Sensor @ 0.0.1
  |-- NTP Library
  |-- OpenTherm Library @ 0.9.0
  |-- Process_control @ 1.0.0
  |-- SPL06-007 @ 0.1.0
  |-- ScioSense ENS16x @ 8.0.0
  |-- ScioSense ENS210 @ 3.0.0
  |-- Sensirion I2C SGP41 @ 0.1.0
  |-- SevenSegmentTM1637 @ 1.1.0
  |-- UdpListener @ 1.0
  |-- Unishox Compressor Decompressor highly customized and optimized for ESP8266 and Tasmota @ 1.0
  |-- VL53L0X @ 1.0.2
  |-- VL53L1X @ 1.0.1
  |-- TLS mini client derived from Arduino @ 1.0
  |-- headers
  |-- WebServer @ 2.0.0
  |-- ams @ 1.0
  |-- arduino-mcp2515-1.0.1
  |-- A4988_Stepper @ 0.0.1
  |-- Adafruit Fingerprint Sensor Library @ 2.1.0
  |-- Adafruit GFX Library @ 1.5.6
  |-- Adafruit LED Backpack Library @ 1.1.6
  |-- Adafruit TSL2591
  |-- DNSServer @ 2.0.0
  |-- DS2480 Library @ 0.1.0
  |-- ESP8266SAM @ 1.0.1
  |-- ESPFtpServer @ 0.1.0
  |-- Ethernet @ 2.0.0
  |-- FT5206_Library @ 1.0.0
  |-- FrogmoreScd30
  |-- FrogmoreScd40
  |-- GT911
  |-- IRremoteESP8266 @ 2.8.6
  |-- JSMN JSON parser customized and optimized for ESP8266 and Tasmota @ 1.0
  |-- KeeloqLib @ 1.1
  |-- TasmotaLList @ 1.0
  |-- LOLIN_HP303B @ 1.0.0
  |-- LedControl @ 1.0.6
  |-- LinkedList
  |-- LiquidCrystal_I2C
  |-- LittleFS @ 2.0.0
  |-- LoRa @ 0.8.0
  |-- MFRC522 @ 1.4.7
  |-- MLX90640
  |-- MPU_accel
  |-- NeoPixelBus @ 2.6.7
  |-- NewPing @ 1.9.1
  |-- OneWire @ 2.3.2
  |-- PubSubClient @ 2.8
  |-- RA8876 @ 1.0.2
  |-- rc-switch @ 1.0.0
  |-- RF24 @ 1.3.3
  |-- RadioLib @ 6.4.2
  |-- Ext-printf @ 1.0
  |-- SD @ 2.0.0
  |-- SD_MMC @ 2.0.0
  |-- SPI @ 2.0.0
  |-- Sensirion I2C SEN5X @ 0.2.0
  |-- TM1638plus @ 1.7.0
  |-- TasmotaModbus @ 3.6.0
  |-- TasmotaSerial @ 3.6.0
  |-- Ticker @ 2.0.0
  |-- Joba_Tsl2561 @ 2.0.10
  |-- WiFiHelper @ 1.0.0
  |-- WiFi @ 2.0.0
  |-- Wire @ 2.0.0
  |-- XPT2046_Touchscreen
  |-- base64 @ 1.1.1
  |-- BME68x
  |-- Waveshare esp 2.9 inch e-paper display driver @ 1.0
  |-- Waveshare esp 4.2 inch e-paper display driver @ 1.0
  |-- Display renderer @ 1.0
  |-- ESP KNX IP Library @ 0.5.2
  |-- HPMA115S0 Arduino Library @ 1.0.0
  |-- mp3_shine_esp32 @ 1.0.0
  |-- BearSSL @ 0.6
  |-- universal display Library @ 0.1
  Building in release mode
  Compiling .pio/build/m5stack-atoms3/src/tasmota.ino.cpp.o
  Building .pio/build/m5stack-atoms3/bootloader.bin
  Generating partitions .pio/build/m5stack-atoms3/partitions.bin
  esptool.py v4.7.3
  Creating esp32s3 image...
  Merged 1 ELF section
  Successfully created esp32s3 image.
  Compiling .pio/build/m5stack-atoms3/liba7f/Wire/Wire.cpp.o
  Compiling .pio/build/m5stack-atoms3/lib400/Adafruit_CCS811-1.0.0.14/Adafruit_CCS811.cpp.o
  Compiling .pio/build/m5stack-atoms3/lib6d7/SPI/SPI.cpp.o
  In file included from /Users/edo/Downloads/Tasmota-development/tasmota/tasmota.ino:24:
  tasmota/include/tasmota_compat.h:23:10: fatal error: esp8266toEsp32.h: No such file or directory

---

• Looking for esp8266toEsp32.h dependency? Check our library registry!
• CLI > platformio lib search "header:esp8266toEsp32.h"
• Web > https://registry.platformio.org/search?q=header:esp8266toEsp32.h

---

23 | #include <esp8266toEsp32.h>
| ^~~~~~~~~~~~~~~~~~
compilation terminated.
*** [.pio/build/m5stack-atoms3/src/tasmota.ino.cpp.o] Error 1
In file included from lib/lib_i2c/Adafruit_CCS811-1.0.0.14/Adafruit_CCS811.cpp:1:
lib/lib_i2c/Adafruit_CCS811-1.0.0.14/Adafruit_CCS811.h:74:17: error: 'sint8_t' does not name a type; did you mean 'uint8_t'?
74 | sint8_t begin(uint8_t addr = CCS811_ADDRESS);
| ^~~~~~~
| uint8_t
lib/lib_i2c/Adafruit_CCS811-1.0.0.14/Adafruit_CCS811.cpp:10:1: error: 'sint8_t' does not name a type; did you mean 'uint8_t'?
10 | sint8_t Adafruit_CCS811::begin(uint8_t addr)
| ^~~~~~~
| uint8_t
*** [.pio/build/m5stack-atoms3/lib400/Adafruit_CCS811-1.0.0.14/Adafruit_CCS811.cpp.o] Error 1
============================================================= [FAILED] Took 23.12 seconds =============================================================

Environment Status Duration

---

m5stack-atoms3 FAILED 00:00:23.115`

Can someone help me?

[Jason2866]

Tasmota has its own boards.json Do not use or add any others. This will not work.
The m5stack-atoms3 uses a S3 with QIO flash and no PSRAM. Just use the [env:tasmota32s3] to compile and it will work

[cturqueti]

Hello everyone,
I'm experiencing an issue while trying to compile Tasmota for the ESP32-S3 [env:tasmota32s3]. I keep getting the following error message:

C:/Users/Carlos/.platformio/packages/toolchain-xtensa-esp-elf/bin/../lib/gcc/xtensa-esp-elf/13.2.0/../../../../xtensa-esp-elf/bin/ld.exe: error: could not run lto-wrapper
collect2.exe: error: ld returned 1 exit status
*** [.pio\build\tasmota32s3-bluetooth\firmware.elf] Error 1

[Jason2866]

@cturqueti You run in the Windows path length limitation. Search Discussions how to work around the Windows only problem