Skip to content

These functionality changes has been implimented in mainline dfu-util on Sourceforge using the --dfuse-address 0x08000000:leave syntax. (Old Description: Slightly modified version of dfu-util to allow for specific chip reset use-case handling with the STM32F4, forked from git://gitorious.org/dfu-util/dfu-util.git)

License

Notifications You must be signed in to change notification settings

dsigma/dfu-util

Repository files navigation

Dfu-util - Device Firmware Upgrade Utilities

Dfu-util is the host side implementation of the DFU 1.0 [1] and DFU 1.1 [2]
specification of the USB forum.

DFU is intended to download and upload firmware to devices connected over
USB. It ranges from small devices like micro-controller boards up to mobile
phones. With dfu-util you are able to download firmware to your device or
upload firmware from it.

dfu-util has been tested with Openmoko Neo1973 and Freerunner and many
other devices.

[1] DFU 1.0 spec: http://www.usb.org/developers/devclass_docs/usbdfu10.pdf
[2] DFU 1.1 spec: http://www.usb.org/developers/devclass_docs/DFU_1.1.pdf

The official website is:

  http://dfu-util.gnumonks.org/

About

These functionality changes has been implimented in mainline dfu-util on Sourceforge using the --dfuse-address 0x08000000:leave syntax. (Old Description: Slightly modified version of dfu-util to allow for specific chip reset use-case handling with the STM32F4, forked from git://gitorious.org/dfu-util/dfu-util.git)

Resources

License

Stars

Watchers

Forks

Packages

No packages published