HTTP client for SIM800L

A smart HTTP client based on Seeeduino that implements the AT HTTP commands to perform GET and POST requests to a JSON API.

Support

• Your board have to support the standard SoftwareSerial library. It doesn't work with HardwareSerial based boards for the moment.
• The API response have to be a valid JSON.

Instalation

Download the library and then import it.

Quick start!

Here's some code to perform a GET request! 👍

unsigned int RX_PIN = 7;
unsigned int TX_PIN = 8;
unsigned int RST_PIN = 12;
HTTP http(9600, RX_PIN, TX_PIN, RST_PIN);
http.configureBearer("movistar.es");
http.connect();

char response[256];
Result result = http.get("your.api.com", response);

Serial.println(response);

http.disconnect();

Here's some code to perform a POST request! 👍

unsigned int RX_PIN = 7;
unsigned int TX_PIN = 8;
unsigned int RST_PIN = 12;
HTTP http(9600, RX_PIN, TX_PIN, RST_PIN);
http.configureBearer("movistar.es");
http.connect();

char response[256];
Result result = http.post("your.api.com", "{\"date\":\"12345678\"}", response);

Serial.println(response);

http.disconnect();

I suggest the ArduinoJSON library for parsing the JSON response, then you can play with the values easily.

How it works?

In order to perform a request, the library follows these steps:

Configure Bearer:

• AT+CREG? -> try until 0,1 (connected to the network)
• AT+SAPBR=3,1,"Contype","GPRS" -> wait for OK
• AT+SAPBR=3,1,"APN","movistar.es" -> wait for OK
• AT+SAPBR=1,1 -> wait for OK

HTTP GET:

• AT+HTTPINIT -> wait for OK
• AT+HTTPPARA="CID",1 -> wait for OK
• AT+HTTPPARA="URL","smartgarden.herokuapp.com"-> wait for OK
• AT+HTTPSSL=0 -> wait for OK (1 when URL starts with "https://")
• AT+HTTPACTION=0 -> wait for 200
• AT+HTTPREAD -> read buffer and parse it
• AT+HTTPTERM -> wait for OK
• AT+SAPBR=0,1

HTTP POST:

• AT+HTTPINIT -> wait for OK
• AT+HTTPPARA="CID",1 -> wait for OK
• AT+HTTPPARA="URL","smartgarden.herokuapp.com" -> wait for OK

For example, if we have this body: {"location_id": 238, "fill_percent": 90}

• AT+HTTPPARA="CONTENT","application/json"
• AT+HTTPDATA=strlen(body),10000 -> wait for DOWNLOAD, then write the body and wait 10000
• AT+HTTPSSL=0 -> wait for OK (1 when URL starts with "https://")
• AT+HTTPACTION=1 -> wait for ,200,
• AT+HTTPREAD -> read buffer and parse it
• AT+HTTPTERM -> wait for OK
• AT+SAPBR=0,1

Future improvements

• Support of HardwareSerial.
• Support of more content types, not only JSON (application/json).