Skip to content

Use the zprint library to format your Clojure source files

License

Notifications You must be signed in to change notification settings

kkinnear/lein-zprint

Folders and files

NameName
Last commit message
Last commit date

Latest commit

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Repository files navigation

lein-zprint

A Leiningen plugin that will use the zprint library to format your Clojure source files. Zprint reformats Clojure source files from scratch, completely ignoring all existing line breaks and white space inside function definitions. Lein-zprint will invoke zprint on one or more source files that you specify.

Lein-zprint will also check to see if files are correctly formatted, without changing them.

See the considerable documentation for zprint.

If you would prefer a standalone program that accepts Clojure(script) source and emits formatted Clojure(script) source, starts up faster than 55ms, and runs faster than anything using Javascript (e.g. node.js), look here here for information!

Note that the pre-built binaries discussed in the link above will (as of version zprint 1.2.9) perform essentially the same operations as lein zprint. You can do:

$ zprint -w *.clj

to format a series of Clojure(script) files. This approach will almost certainly run faster than lein zprint, possibly taking 60% of the time as lein zprint. The only substantive difference is that it won't read zprint configuration from the project.clj file.

The zprint library itself is highly configurable, allowing you to tune the formatting.

To configure lein-zprint in its normal, highly configurable way:

  • Use $HOME/.zprintrc or $HOME/.zprint.edn
  • Define :search-config? as true in your $HOME/.zprintrc or $HOME/.zprint.edn file, and then configure a .zprintrc or .zprint.edn file in the current directory or any parent of that directory. Zprint will use the first file it finds when searching up from the current directory.
  • Place a :zprint {} options map in your project.clj file

Usage

Formatting Files

It is pretty straightforward to use lein zprint.

Place [lein-zprint "1.2.9"] into the :plugins vector of your project.clj:

:plugins [[lein-zprint "1.2.9"]]

Then, to format a source file, simply invoke lein zprint on that file:

$ lein zprint src/<project>/<file-name>.clj

Lein-zprint will replace the existing file with one formatted by zprint. It will also rename the existing file by appending a .old extension to the file (after removing any existing file with that name and an .old extension).

If you don't like the results, you can easily replace the new file by removing it and renaming the .old by removing the .old extension. Of course, you can only do this once, as lein zprint will continue to replace the .old file with the latest file whenever it is run.

Renaming the initial file with a .old extension can be disabled by setting a zprint options map in your project.clj:

...
:plugins [[lein-zprint "1.2.9"]]
:zprint {:old? false}
...

NOTE: You should invoke lein zprint from the top level of your leiningen project (i.e., the directory that contains the project.clj file). While you can invoke lein zprint from your source directory, the current directory for lein zprint will be the top level of your leiningen project and it will not find the files in the current directory. Which will confuse us all.

Checking Files

You can use lein-zprint to check to see if files are formatted correctly, without changing them. Use the -c or --check command line switches to access this capability. When checking files, in addition to printed messages, the exit status is 0 (for success) if all of the files were formatted correctly. The exit status is 1 (for failure) if any of the files were not formatted correctly.

√ % lein zprint -c correctcheck
Processing file: correctcheck
All files formatted correctly.
√ %

Correctly formatted is defined as whatever formatting lein-zprint would perform based on the configuration it uses when invoked for checking the files.

√ % lein zprint -c proj.clj correctcheck
Processing file: proj.clj
File: proj.clj was incorrectly formatted
Processing file: correctcheck
1 file formatted incorrectly
?1 %

Configuring lein zprint to operate on source files

See zprint for information on how to configure the the actual formatting performed by the zprint library.

Overview

There are two ways that you will probably want to configure lein zprint, though there are several more described below:

  • A :zprint key in your project.clj
  • Comment lines starting with ;!zprint in your source file

Details

You can use the following approaches when configuring lein zprint:

  • The $HOME/.zprintrc file, containing a zprint options map, as described in the zprint readme. This configuration information will be used for all invocations of the zprint library by this user -- including lein zprint and zprint calls made when running in the REPL.

  • A :zprint options map in project.clj.

Again, you could change the width for the project this way and turn off the renaming of files with a .old extension (as well as configure any of the myriad aspects of the zprint library):

```
...
:zprint {:width 90 :old? false}
...
```

This only affects the configuration for lein zprint, it is not recognized by repl (c)zprint or (c)zprint-fn calls. That said, it is likely the place where you will want to configure a width and turn off the renaming of files with a .old extension, as above.

  • A .zprintrc file in the top level of the project.

You can put a .zprintrc file in your project (at the same level as the project.clj file), and it will be recognized and used for configuring lein zprint if you also put {:search-config? true} in the :zprint options map in the project.clj file.

  • Arguments on the command line of lein zprint.

The first argument to lein zprint can be a number or an options map. If it is a number, it is used as the width. If it is an options map, it is used to configure zprint. If the first argument is a number, the second argument can be an options map. Note that an options map must be surrounded by single or double quotes.

Here is yet another way to change the width to 90:

lein zprint 90 src/myproject/*.clj

and one other (of course this options map can contain anything allowed to configure zprint -- see the zprint readme).

lein zprint '{:width 90}' src/myproject/*.clj

There are so many ways to configure zprint (and even more for lein zprint), that you might end up wondering what configuration you are actually using. To find out, you can place the special token :explain anywhere in the arguments list, and lein zprint will output the current options map with information explaining where all of the non-default values came from. Thus,

lein zprint 95 :explain src/myproject/*.clj

will set the width to 95, output the options map to standard out, and then format all of the .clj files in src/myproject.

Configuring lein zprint in your source file

No matter how you set up the global zprint configuration for your project, there will be parts of some of your source files that you want configured differently. You may simply want to disable lein zprint from part of a file, or you may want to configure the zprint formatting engine to operate differently for a single function definition (or for a segment of the file). All of these things are possible.

Lein zprint will examine every "top level" comment (that is, every comment not inside a collection in the file) for the following signature:

;!zprint 

When it finds a comment line that begins with ";!zprint ", it will read the rest of the line as a Clojure s-expression, and assume that it is a zprint options map. In addition, there is one additional key for the options map that zprint ignores but which is very important to lein zprint, the :format key. Using the :format key, you can:

  • Turn off formatting in the file:
;!zprint {:format :off}
  • Turn on formatting in the file (it is on by default):
;!zprint {:format :on}
  • Skip formatting the next non-whitespace, non-comment element in the files (e.g., the next function definition):
;!zprint {:format :skip}
  • Change the formatting used for the remainder of the file (unless it is changed again, of course):
;!zprint {<zprint-options>}
  • Change the formatting used for the next non-whitespace and non-comment element of the file (e.g., the next function definition):
;!zprint {:format :next <zprint-options>}

As much as it would be nice to have one zprint formatting configuration be perfect for every function and part of your source file, I haven't found that to be the case for my sources, and you probably won't either. For instance, the help text you get from lein zprint :help (see below) is organized as a vector of strings, one per line. If I let lein zprint loose on it, it wraps all of the strings as tightly as it can into 80 columns, and I can't see what it looks like. So I do this before the definition of the help text:

;!zprint {:format :next :vector {:wrap? false}}

Which makes that one def look a lot better.

Not getting what you expect?

If a ;!zprint directive is itself formatted incorrectly, you will get output indicating the problem.

You can place an :explain element after a file with ;!zprint formatting directives in it, and you will see the values of all of the zprint formatting options set when the file exited and before they are cleared when the next file is begun. This is scant help for what is happening inside of the file, but it can be helpful nonetheless. Any changes made by ;!zprint directives are shown, and the directive is identified by its number in the file.

Help!

Finally, if you forget any of this, you can always type:

lein zprint :help

which will output some helpful reminders, including all of the {:format ...} information above..

Support

If you have problems with lein zprint, please create an issue. Please include the output from:

lein zprint :support <whatever-you-put-here-that-did-not-work-right> :support

as well as the source file (or fragment thereof) that is a concern, and please show what lein zprint produced and explain how it differed from what you expected.

Limiting Configuration for lein-zprint

Note that some people want a formatter which is less configurable. To that end, lein-zprint will also support specification of its operation with only very small number of fixed configurations. At present, the only fixed configuration is default, where lein-zprint will accept no external configuration, and will format based only on the default configuration and the information in the file.

If you specify default configuration lein-zprint will ignore all external configuration, including the $HOME/.zprintrc file and most of the information in the :zprint key in the project.clj file. The only external configuation it will accept (which doesn't affect the formatting) are the :old? and :parallel? keys in the :zprint map in the project.clj file.

This default configuration is available in two ways:

  • If you specify "-d" or "--default" on the command line in place of an options map.

  • If you specify :command :default in the :zprint map in the project.clj file. Note that you cannot specify this in the $HOME/.zprintrc file, it is only available to the :zprint map in the project.clj file! By using this approach, a project can enforce formatting that is not affected by a users default zprint configuration or by any options map given on the lein zprint command line.

License

Copyright © 2016-2023 Kim Kinnear

Distributed under the MIT License. See the file LICENSE for details.

About

Use the zprint library to format your Clojure source files

Resources

License

Stars

Watchers

Forks

Packages

No packages published