Compatible with newer Arduino format.

boards.txt → avr/boards.txt

@@ -4,32 +4,35 @@ mighty_opt.name=Mighty 1284p 16MHz using Optiboot
 mighty_opt.upload.protocol=arduino
 mighty_opt.upload.maximum_size=130048
 mighty_opt.upload.speed=115200
+mighty_opt.upload.tool=arduino:avrdude
 mighty_opt.bootloader.low_fuses=0xff
 mighty_opt.bootloader.high_fuses=0xde
 mighty_opt.bootloader.extended_fuses=0xfd
-mighty_opt.bootloader.path=optiboot
-mighty_opt.bootloader.file=optiboot_atmega1284p.hex
+mighty_opt.bootloader.file=optiboot\optiboot_atmega1284p.hex
 mighty_opt.bootloader.unlock_bits=0x3F
 mighty_opt.bootloader.lock_bits=0x0F
+mighty_opt.bootloader.tool=arduino:avrdude
 mighty_opt.build.mcu=atmega1284p
 mighty_opt.build.f_cpu=16000000L
 #mighty_opt.build.core=arduino:arduino
 mighty_opt.build.core=standard
 mighty_opt.build.variant=standard
 
+
 ##############################################################
 
 avr_developers.name=avr-developers.com pinouts 16MHz using Optiboot
 avr_developers.upload.protocol=arduino
 avr_developers.upload.maximum_size=130048
 avr_developers.upload.speed=115200
+avr_developers.upload.tool=arduino:avrdude
 avr_developers.bootloader.low_fuses=0xff
 avr_developers.bootloader.high_fuses=0xde
 avr_developers.bootloader.extended_fuses=0xfd
-avr_developers.bootloader.path=optiboot
-avr_developers.bootloader.file=optiboot_atmega1284p.hex
+avr_developers.bootloader.file=optiboot\optiboot_atmega1284p.hex
 avr_developers.bootloader.unlock_bits=0x3F
 avr_developers.bootloader.lock_bits=0x0F
+avr_developers.bootloader.tool=arduino:avrdude
 avr_developers.build.mcu=atmega1284p
 avr_developers.build.f_cpu=16000000L
 #avr_developers.build.core=arduino:arduino
@@ -42,13 +45,14 @@ bobuino.name=Bobuino
 bobuino.upload.protocol=arduino
 bobuino.upload.maximum_size=130048
 bobuino.upload.speed=115200
+bobuino.upload.tool=arduino:avrdude
 bobuino.bootloader.low_fuses=0xff
 bobuino.bootloader.high_fuses=0xde
 bobuino.bootloader.extended_fuses=0xfd
-bobuino.bootloader.path=optiboot
-bobuino.bootloader.file=optiboot_atmega1284p.hex
+bobuino.bootloader.file=optiboot\optiboot_atmega1284p.hex
 bobuino.bootloader.unlock_bits=0x3F
 bobuino.bootloader.lock_bits=0x0F
+bobuino.bootloader.tool=arduino:avrdude
 bobuino.build.mcu=atmega1284p
 bobuino.build.f_cpu=16000000L
 #bobuino.build.core=arduino:arduino
@@ -61,13 +65,14 @@ mighty.name=Original Mighty 1284p 16MHz
 mighty.upload.protocol=stk500v1
 mighty.upload.maximum_size=129024
 mighty.upload.speed=57600
+mighty.upload.tool=arduino:avrdude
 mighty.bootloader.low_fuses=0xff
 mighty.bootloader.high_fuses=0xdc
 mighty.bootloader.extended_fuses=0xfd
-mighty.bootloader.path=standard
-mighty.bootloader.file=ATmegaBOOT_1284P.hex
+mighty.bootloader.file=standard\ATmegaBOOT_1284P.hex
 mighty.bootloader.unlock_bits=0x3F
 mighty.bootloader.lock_bits=0x0F
+mighty.bootloader.tool=arduino:avrdude
 mighty.build.mcu=atmega1284p
 mighty.build.f_cpu=16000000L
 #mighty.build.core=arduino:arduino
@@ -80,15 +85,17 @@ mighty8.name=Original Mighty 1284p 8MHz
 mighty8.upload.protocol=stk500v1
 mighty8.upload.maximum_size=129024
 mighty8.upload.speed=28800
+mighty8.upload.tool=arduino:avrdude
 mighty8.bootloader.low_fuses=0xff
 mighty8.bootloader.high_fuses=0xdc
 mighty8.bootloader.extended_fuses=0xfd
-mighty8.bootloader.path=standard
-mighty8.bootloader.file=ATmegaBOOT_1284P_8MHz.hex
+mighty8.bootloader.file=standard\ATmegaBOOT_1284P_8MHz.hex
 mighty8.bootloader.unlock_bits=0x3F
 mighty8.bootloader.lock_bits=0x0F
+mighty8.bootloader.tool=arduino:avrdude
 mighty8.build.mcu=atmega1284p
 mighty8.build.f_cpu=8000000L
 #mighty8.build.core=arduino:arduino
 mighty8.build.core=standard
 mighty8.build.variant=standard
+

avr/platform.txt

@@ -0,0 +1,113 @@
+
+# Arduino AVR Core and platform.
+# ------------------------------
+#
+# For more info:
+# https://github.com/arduino/Arduino/wiki/Arduino-IDE-1.5---3rd-party-Hardware-specification
+
+name=Arduino AVR Boards
+version=1.6.7
+
+# AVR compile variables
+# --------------------- 
+
+compiler.warning_flags=-w
+compiler.warning_flags.none=-w
+compiler.warning_flags.default=
+compiler.warning_flags.more=-Wall
+compiler.warning_flags.all=-Wall -Wextra
+
+# Default "compiler.path" is correct, change only if you want to overidde the initial value
+compiler.path={runtime.tools.avr-gcc.path}/bin/
+compiler.c.cmd=avr-gcc
+compiler.c.flags=-c -g -Os {compiler.warning_flags} -ffunction-sections -fdata-sections -MMD
+# -w flag added to avoid printing a wrong warning http://gcc.gnu.org/bugzilla/show_bug.cgi?id=59396
+# This is fixed in gcc 4.8.3 and will be removed as soon as we update the toolchain
+compiler.c.elf.flags={compiler.warning_flags} -Os -Wl,--gc-sections
+compiler.c.elf.cmd=avr-gcc
+compiler.S.flags=-c -g -x assembler-with-cpp
+compiler.cpp.cmd=avr-g++
+compiler.cpp.flags=-c -g -Os {compiler.warning_flags} -fno-exceptions -ffunction-sections -fdata-sections -fno-threadsafe-statics -MMD
+compiler.ar.cmd=avr-ar
+compiler.ar.flags=rcs
+compiler.objcopy.cmd=avr-objcopy
+compiler.objcopy.eep.flags=-O ihex -j .eeprom --set-section-flags=.eeprom=alloc,load --no-change-warnings --change-section-lma .eeprom=0
+compiler.elf2hex.flags=-O ihex -R .eeprom
+compiler.elf2hex.cmd=avr-objcopy
+compiler.ldflags=
+compiler.size.cmd=avr-size
+
+# This can be overriden in boards.txt
+build.extra_flags=
+
+# These can be overridden in platform.local.txt
+compiler.c.extra_flags=
+compiler.c.elf.extra_flags=
+compiler.S.extra_flags=
+compiler.cpp.extra_flags=
+compiler.ar.extra_flags=
+compiler.objcopy.eep.extra_flags=
+compiler.elf2hex.extra_flags=
+
+# AVR compile patterns
+# --------------------
+
+## Compile c files
+recipe.c.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.c.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.c.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile c++ files
+recipe.cpp.o.pattern="{compiler.path}{compiler.cpp.cmd}" {compiler.cpp.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.cpp.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Compile S files
+recipe.S.o.pattern="{compiler.path}{compiler.c.cmd}" {compiler.S.flags} -mmcu={build.mcu} -DF_CPU={build.f_cpu} -DARDUINO={runtime.ide.version} -DARDUINO_{build.board} -DARDUINO_ARCH_{build.arch} {compiler.S.extra_flags} {build.extra_flags} {includes} "{source_file}" -o "{object_file}"
+
+## Create archives
+recipe.ar.pattern="{compiler.path}{compiler.ar.cmd}" {compiler.ar.flags} {compiler.ar.extra_flags} "{build.path}/{archive_file}" "{object_file}"
+
+## Combine gc-sections, archives, and objects
+recipe.c.combine.pattern="{compiler.path}{compiler.c.elf.cmd}" {compiler.c.elf.flags} -mmcu={build.mcu} {compiler.c.elf.extra_flags} -o "{build.path}/{build.project_name}.elf" {object_files} "{build.path}/{archive_file}" "-L{build.path}" -lm
+
+## Create output files (.eep and .hex)
+recipe.objcopy.eep.pattern="{compiler.path}{compiler.objcopy.cmd}" {compiler.objcopy.eep.flags} {compiler.objcopy.eep.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.eep"
+recipe.objcopy.hex.pattern="{compiler.path}{compiler.elf2hex.cmd}" {compiler.elf2hex.flags} {compiler.elf2hex.extra_flags} "{build.path}/{build.project_name}.elf" "{build.path}/{build.project_name}.hex"
+
+## Save hex
+recipe.output.tmp_file={build.project_name}.hex
+recipe.output.save_file={build.project_name}.{build.variant}.hex
+
+## Compute size
+recipe.size.pattern="{compiler.path}{compiler.size.cmd}" -A "{build.path}/{build.project_name}.elf"
+recipe.size.regex=^(?:\.text|\.data|\.bootloader)\s+([0-9]+).*
+recipe.size.regex.data=^(?:\.data|\.bss|\.noinit)\s+([0-9]+).*
+recipe.size.regex.eeprom=^(?:\.eeprom)\s+([0-9]+).*
+
+
+# AVR Uploader/Programmers tools
+# ------------------------------
+
+tools.avrdude.path={runtime.tools.avrdude.path}
+tools.avrdude.cmd.path={path}/bin/avrdude
+tools.avrdude.config.path={path}/etc/avrdude.conf
+
+tools.avrdude.upload.params.verbose=-v
+tools.avrdude.upload.params.quiet=-q -q
+tools.avrdude.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"
+
+tools.avrdude.program.params.verbose=-v
+tools.avrdude.program.params.quiet=-q -q
+tools.avrdude.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"
+
+tools.avrdude.erase.params.verbose=-v
+tools.avrdude.erase.params.quiet=-q -q
+tools.avrdude.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uefuse:w:{bootloader.extended_fuses}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m
+
+tools.avrdude.bootloader.params.verbose=-v
+tools.avrdude.bootloader.params.quiet=-q -q
+tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.platform.path}/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
+
+
+# USB Default Flags
+# Default blank usb manufacturer will be filled it at compile time
+# - from numeric vendor ID, set to Unknown otherwise
+build.usb_manufacturer="Unknown"
+build.usb_flags=-DUSB_VID={build.vid} -DUSB_PID={build.pid} '-DUSB_MANUFACTURER={build.usb_manufacturer}' '-DUSB_PRODUCT={build.usb_product}'