OpenWRT-TL-MR3420

Follow obtain.firmware.generate guide to customize and build OpenWRT images.

Built using the following make command.

make image PROFILE=TLMR3420 PACKAGES="kmod-usb-net kmod-usb-net-rndis kmod-usb-net-cdc-ether usbutils udev nano -kmod-ipv6"

A version with MQTT broker and other handy utilities can be built with the following command.

make image PROFILE=TLMR3420 PACKAGES="-kmod-ipv6 nano mosquitto kmod-usb-storage vsftpd unzip lua lua-mosquitto lua-cjson mosquitto-client kmod-fs-vfat kmod-fs-ntfs kmod-fs-ext4 uhttpd-mod-lua"

Features

• Contains kmod-usb-net kmod-usb-net-rndis kmod-usb-net-cdc-ether usbutils udev packages for Ethernet over USB modems
• Disabled IPv6 modules and packages
• Nano comes preinstalled

Install

Upgrade from already installed OpenWRT version ...

mtd -r write openwrt-15.05-ar71xx-generic-tl-mr3420-v2-squashfs-sysupgrade.bin firmware

Or use TL-MR3420 Web UI to flash the following image ...

openwrt-15.05-ar71xx-generic-tl-mr3420-v2-squashfs-factory.bin

Configure USB Modem with DHCP

Configure USB modems using uci ...

uci set network.wan.ifname=eth2 # eth2/usb0 or whatever
uci set network.wan.mtu='1400'
uci commit
/etc/init.d/network reload