2.4.8.6 (Lisias) for KSP >= 1.3

• Due recently realised changes on the way CKAN handles alternate downloads, some safeties were implemented to alert the user if by some reason it was installed a non CKAN approved package on a CKAN managed installment.
• Closes Issues:
  • #339 Prevent non CKAN safe binaries from being used on CKAN managed installations.

---

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.8.5 (Lisias) for KSP >= 1.3

• Fixes a long standing mishandling on the Life Cycle of the SingletonBehaviour's extended classes.
• Closes Issues:
  • #336 Finally Diagnosed a Memory Leak on EditorHelper

---

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.8.4 (Lisias) for KSP >= 1.3

• Somewhat better error messages, in a (futile, probably) attempt to prevent this kind of crap.
• Updates MMWD to 1.1.2.1

---

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.8.3 (Lisias) for KSP >= 1.3

• Fixes a (yet another :P) major screwup of mine, this one while handling systems without ModuleManagerWatchDog installed - exactly the situation the TweakScale.WatchDog was born to handle on 2.4.8.0...
  • Yep, sometimes I'm just overwhelmed by Real Life©...
• Reworks Issues:
  • #312 Write an internal Self Check Mechanism

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.8.2 (Lisias) for KSP >= 1.3

• Detected and fixed a borderline situation in which the IPartCostModifier from the TweakScale's PartModule was being called before the OnLoad while merging a craft with scaled cockpit - unsure if the cockpit made any difference, but whatever.
  • I'm shooting first and making questions later - I will left a proper diagnose to be tackled down on the Beta 2.5.

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.8.1 (Lisias) for KSP >= 1.3

+ ***WITHDRAWN***
+ Let's pretended it never happened, please?

2.4.8.0 (Lisias) for KSP >= 1.3

• This release finally solves some long standing problems caused by Editor when handling ModulePartVariant that I only managed to diagnose recently, see issues #307 and #314 et all for the full history for this one.
• I hope that, finally, the 2.4.8.x series will put an end point on the legacy branch. I plan to do only minor adjustments (if needed) on the legacy from now on.
  • If I manage to do everything right (this time), the already legendary 2.5 series will be bought into the mainstream Soon™.
• ATTENTION: You need to update KSP-Recall to 0.5.0.1 at least.
• Closes Issues:
  • #325 Cope with net-lisias-ksp/KSP-Recall#73
  • #312 Write an internal Self Check Mechanism
  • #307 Attachment Points are not being scaled (or being reset) after changing the Variant
  • #283 New screw up from KSP 1.11.0 Editor was revealed by the 2.4.6.20 release

Known Issues

• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialized support not included on StockWaterfallEffects.
  • #27

2.4.7.6 (Lisias) for KSP >= 1.3 (Keep Waking Edition)

• Backports from Beta a long standing bug on AutoScale when attaching parts with different scaling methods.
• Found an idiocy of mine while trying to prevent a hypothetical problem - and ended up creating a concrete one instead.
  • If you know a priest in need to a job, we are hiring... :P
• Closes Issues:
  • #323 Auto-Scale is screwed since 2.4.7.0

Known Issues

• Attachment nodes are being reset when changing Variant on a scaled part. Please change the Variant before scaling the part as a temporary workaround.
  • See issues #307 and #314 for the gory details.
• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialised support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialised support not included on StockWaterfallEffects.
  • #27

2.4.7.5 (Lisias) for KSP >= 1.3

• An insidious bug screwing parts that use techRequired was fixed.
  • Thanks to Turbo Ben for the work into zeroing into the exact root cause of the problem!

Known Issues

• Attachment nodes are being reset when changing Variant on a scaled part. Please change the Variant before scaling the part as a temporary workaround.
  • See issues #307 and #314 for the gory details.
• There's a long standing issue on TweakScale about scaling ModuleEnginesFX's plumes - some engines' plumes is just not scaled, while others scaled pretty badly. It's something that never worked right on TweakScale, and it will only be really fixed on TweakScale 2.5 (when this thing goes gold)
  • The best workaround (and also the reason I'm dragging my feet on this) is to use SmokeScreen or Waterfall.
    • For SmokeScreen (works on all KSP versions), you need:
      • SmokeScreen itself.
      • Real Plumes (to enable SmokeScreen on Stock parts)
        • Additional Part Sets and Add'Ons may need specialised support not included on Real Plumes.
    • For Waterfall, you need:
      • Waterfall itself.
      • StockWaterfallEffects (to enable Waterfall on Stock parts)
        • Additional Part Sets and Add'Ons may need specialised support not included on StockWaterfallEffects.
  • #27

2.5.0.62 **BETA** (Lisias) for KSP >= 1.3

• An insidious bug screwing parts that use techRequired was fixed.
  • Thanks to Turbo Ben for the work into zeroing into the exact root cause of the problem!
• Small typos fixed.
• Fixes #307. AGAIN, and restores the #261 that got broken.
• Reworks the support DLLs.
  • Reinstates the 1.8.x one;
  • Merges it with the 1.9.x, that became redundant.
• Closes Issues:
  • #319 Reinstate dedicated DLL support for KSP 1.8.x
  • #307 Create an option to fix the part's cost when calculating the DryCost.

Known Issues

The Stock plumes are not being scaled correctly. :/

SmokeScreen and Waterfall, however, appear to work fine.

Your Attention Please

---

Lasciate ogne speranza, voi ch'intrate

---

This is the BETA release of TweakScale, meant for early evaluation of features still to be released to the public.

Please don't use this on valuable savegames: things here are unstable sometimes - and care with back compatibility is not a main concern on development.

You probably want a Latest Release, so you may want to download the Release 2.4.8.1 above.

If you are still willing to risk your SAS on it, you will need to have installed the latest KSPe: https://github.com/net-lisias-ksp/KSPe/releases